Issues
- 0
Randomly lost connection with BMS
#41 opened by mvincm - 1
CAN'T ADD HAT INTERFACE - ports not available
#40 opened by nossiers - 3
no CANbus
#39 opened by fitschinet - 16
VeCan install help
#5 opened by mar0997 - 11
- 2
Waveshare_2-channel_FD Overlay wrong?
#35 opened by Didi1965 - 3
Is MCP2518FD supported?
#36 opened by dersch81 - 1
Automatic install via Setup helper not possible
#34 opened by dafricki - 2
- 3
- 2
can0 config is old format -- can't install
#32 opened by andyalford - 9
Seplos / EEL RS485 to USB Cable
#31 opened by maxpd1 - 1
VeCanSetup unable to install on RaspberryPi
#30 opened by JensGumball - 1
Waveshare 1-channel CANbus Hat 8 MHz errors
#29 opened by Thaelian - 5
CAN device not showing
#28 opened by bluey1 - 1
Waveshare 16MHz support
#27 opened by ArjanGoossens - 3
- 5
- 3
Venus OS 3.01 not supported?
#25 opened by mscodeNEO - 2
RS485 and CAN Interface on Wafeshare Hat ?
#11 opened by claib - 3
Victron MK3 USB to VEBus Adapter compatible?
#24 opened by Magnus8513 - 1
VeCanSetup ADD is not shown
#23 opened by martin28396 - 7
- 1
Two batteries via can shows on product ID 512
#20 opened by Micha854 - 0
Use USB to RS485 Adapter
#19 opened by pforrmi - 5
- 4
PICAN-M installation
#17 opened by dahlei - 9
no CAN-bus under Services; can0 DOWN !
#16 opened by gerd-git - 2
V2.90 can - bus install
#15 opened by MS123uk - 1
ve can setup problem
#14 opened by MS123uk - 3
PiCAN-M / PiCAN2 support
#8 opened by PierreSmits - 2
Not a real issue just a note on Canbus
#13 opened by RobDuthie - 3
- 3
Venus 2.90 released
#7 opened by claib - 7
Venus changes
#6 opened by jhofstee - 6
CANable fails to initialise on RPI reboot. Disconnect / reconnect seems to get it working again.
#4 opened by andyalford - 0