/homebridge-cmd4

CMD4 Plugin for Homebridge - Supports ~All Accessory Types & now all Characteristics too

Primary LanguageJavaScriptApache License 2.0Apache-2.0

Homebridges-cmd4 - CMD4 Plugin for Homebridge - Supports ~All Accessory Types and now all Characteristics, Custom Characteristics and Priority Queued Polling too!!



    Cmd4 is a plugin for Homebridge that lets you see what Homebridge and Homekit are all about, without actually owning a single accessory! For the more advanced user, Cmd4 brings CLI support for all device types (Accessories) and characteristics.

Homebridge UI User. Do not click on any inline links. Homebridge UI does not supprt them. Bug#1098



Table of Contents



About the Cmd4 Plugin

    This plugin allows you to see what Homebridge is all about, without having any home control accessories. If you can run Homebridge and install this plugin, all the possible accessories are now available to you within HomeKit or Eve. (Except Camera Streaming).

    Similar to other command plugins, you can use Cmd4 to execute command line interface (CLI) scripts, but with Cmd4 the devices don't just appear in HomeKit as a Switch or a Light, but now they can appear as a Garage Door opener, Air Purifier ... and you can control all of their characteristics too.



How the Cmd4 Plugin Works

    Cmd4 comes with a fully populated and documented config.json file that is set to using just the cached entry's in the config file itself. This makes HomeKit behave as if you actually have all these Accessories! If you choose to add in your own scripts, the Cmd4 Github pages at http://ztalbot2000.github.io/homebridge-cmd4 have example script templates and further development instructions.



Features

    Cmd4 supports, Lights, Garage Door Openers, Outlets, Switches, Lock Maintenance Systems, Lock Management Systems, Humidity Sensors, Doors, Light Sensors, Temperature Sensors, Contact Sensors, Motion Sensors, Thermostats, Security Systems, Battery Services, Filter Maintenance Systems, Air Purifiers, Television, Television Speaker, Input Sources, Irrigation Systems, ... everything but Camera Streaming since it is not pliable to a command line Interface.

    Cmd4 also supports three types of polling, modified by the "Cmd4_Mode" directive.

  • { "Cmd4_Mode": "Always" } - As before, All characteristic are sent/retrieved from the device. ( Default )
  • { "Cmd4_Mode": "Polled" } - Polled characteristics are retrieved from the device. Non polled characteristic values are sent/retrieved from cache.
  • { "Cmd4_Mode": "FullyPolled" } - All characteristics are retrieved from cache. Polled characteristics are sent to the device. Expect any characteristic to be updated via configuring polling.
  • { "Cmd4_Mode": "Demo" } - All characteristics are sent/retrieved from cache.

    Cmd4 supports Fakegato History and retaining previous state over restarts.

    Cmd4 Version 2.0 supported linked Accessories and the latest 3.0 Version supports both Platform plugin and Accessory plugin configurations as documented on developers.homebridge.io.

    Cmd4 Version 3.5 adds in support for Custom Characteristics.

    Cmd4 Version 3.6 allows you to configure Priority Queued Polling so that the accessory only receives one request at a time; with priority to all IOS requests first and polling second.



Screenshots



Installation Details

Step 1. Install Homebridge

See homebridge for complete details.

Step 2. Install Cmd4 Plugin

   *SHELL*> sudo npm install -g --unsafe-perm homebridge-cmd4

Step 3. Install/Update your config.json file

    Use the provided config.json file or add it to your own.

   *SHELL*> cp /usr/lib/node_modules/homebridge-cmd4/Extras/config.json $HOME/.homebridge/

Step 4. Restart homebridge

See homebridge for complete details.

Step 5. Try Homekit

    If you are not already familiar with Homekit, you may wish to look at the documentation for Homebridge and how to configure it with Homekit. The gist of it is that you enter the manual code defined in the config.json file. I chose 5555555 for simplicity.

That's it! Enjoy all your new Virtual Accessories!. ✅



Basic Troubleshooting

Error: Command failed

    This error is indicative to many situations. The most common is that the command took to long to run.

  Error: Command failed: /homebridge/Server.sh Get 'Server' 'On'

    at ChildProcess.exithandler (child_process.js:297:12)
    at ChildProcess.emit (events.js:193:13)
    at maybeClose (internal/child_process.js:1001:16)
    at Process.ChildProcess._handle.onexit (internal/child_process.js:266:5)
  killed: true
  code: null
  signal: SIGTERM,
  cmd: "/homebridge/Server.sh Get Server On"

Check that the command exists, but also that the timeout value in your config.json for that accessory is not too low.

Removing Cached Information

    Starting with Cmd4 Version 3 the restartRecover option, defaulted to true, will mean that sometimes changing the config.json accessory options will have no affect. There are two ways to resolve this.
Note: As of version 3.0.4, Cmd4 directives like polling, state_cmd, etc will try to be restored from the config.json.

  • Restart with { restartRecover: false } set in your config.json.
  • Remove Homebridges cached information. 
       ^Shell*> rm -rf $HOME/.homebridge/accessories $HOME/.homebridge/persist

Debug Steps

Step 1. Change to your $HOME directory

    Homebridge is expected to run from a user's home directory where it can find the .homebridge/config.json.

   *SHELL*> cd $HOME

Step 2. Run homebridge in debug mode

   *SHELL*> DEBUG=* homebridge -D



Rationale

    After playing with homebridge-cmd and then homebridge-cmdswitch2, I really wanted to control as much as I could. I did not have all the devices, but I did have a light and a Sony Android TV. I wanted to control these and see what else I could do.
    If you were wondering what happened to version 3, well I learned a lot, hence the working cmd4.



Todo

  • Linked characteristics, i.e. a smoke detectors battery is not yet linked.
  • Support for custom characteristics for an accessory. Warning, May Not possible to be displayed by any GUI
  • Support multi word device names. (Technically done, but scripting is hard for newbies).
  • Scripting language to avoid creating new Homebridge modules.
  • HTTP commands. Might be just to many options
  • Become Homebridge Certified. ( The schema file would be very difficult )



Contributing

    Best ways to contribute

Promotion

    Like the project? Please support to ensure continued development going forward:

  • Star this repo on [GitHub][homebridge-cmd4-repo]
  • Follow the repo on [GitHub][homebridge-cmd4-repo]
  • Follow me



Inspiration and special thanks

Based on the best of:



License

See LICENSE