This repository contains configuration meant for use on my Linux or macOS computers. Often, these are called "dot files" in casual use because the filenames and directory names begin with a leading dot, which hides them from view on those operating systems. That makes them convenient for configuration.
If you're reading this on a file system, you're seeing the only non-hidden portion of a source-controlled set of configuration files designed for use on Linux and macOS. The canonical version is hosted at GitHub. (See the notes on how to hide this file, too.)
I have a few custom approaches regarding how I set up, use, and maintain this repository, which I'll describe here. This is necessary because turning your home directory into a giant Git repository is very weird and not recommended under most circumstances. The techniques I describe below help mitigate that weirdness.
Note that this repository contains configuration, not setup itself. Nothing here is meant to take over and act decisively of its own accord. It does not install things. It does not change global system settings. That is left for me, as a user, to do. It merely configures relevant programs if they exist.
To set up, git-clone(1)
is not recommended. The home directory already
exists, so we don't need to create a new working tree, which
git-clone(1)
would do. An unqualified git clone
would also set up
the default Git directory. I don't want either of those things to
happen.
Instead, I treat my home directory as an existing working tree to
initialize with git-init(1)
. I also use a non-default Git directory
which won't be found by Git automatically. This will prevent most
tooling from seeing my home directory as a repository under most
circumstances.
To do this, I explicitly set the Git directory and the Git working tree
for all Git commands which manipulate the home repository. I use an
alias which conveniently sets all these. I call it home
, simply
enough. The home
alias can be used in place of the git
command to
manage my home directory configuration.
alias home="git --work-tree=$HOME --git-dir=$HOME/.home.git"
Note that this sets the Git directory under "$HOME/.home.git
" instead
of "$HOME/.git
." That effectively both hides the Git configuration
from both its own tooling (unless the home
alias is used) and from
normal directory listings. Another very neat thing about this alias is
that it will refer to the home repository, no matter which directory is
the current one, even if I'm in another Git repository at the time.
With this in mind, let's see how a first-time setup works using a recent version of Git. Assume first that Git is installed and that SSH auth to GitHub is established. Then, I run the following.
alias home="git --work-tree=$HOME --git-dir=$HOME/.home.git"
home init
home remote add origin git@github.com:emilyst/home.git
home fetch --all
home reset --hard origin/master
home submodule update --init --rebase
Afterwards, always use the home
alias to interact with the home
repository. (This alias is configured for Zsh by my current
configuration.) Local "master" tracks "origin/master" automatically
during this setup, thanks to recent versions of Git.
All files and directories are ignored by default so that I only version
the few files which matter to me. This is done using a sneaky trick:
a special ".gitignore.home
" file which lives in my home repository
that doesn't get used unless the current Git directory is the one for
the home repository. I wanted to avoid having a file named
".gitignore
" in my home directory which excludes everything because
Git and certain other tools will look for it.
To pull this off, first, I added a configuration stanza to the bottom of my global Git configuration like the following.
[includeIf "gitdir:~/.home.git"]
path = .gitconfig.home
That file only gets included if the current Git directory
matches.
Then, in that included configuration file, I can set
a new core.excludesFile
setting which overrides the original (which is
why it has to be at the bottom).
[core]
excludesfile = ~/.gitignore.home
Finally, .gitignore.home is configured to exclude everything by containing a single wildcard.
The reason for all this conditional inclusion rigmarole is for the same reason I use a custom Git directory—so that no naive tooling goes recursing up the directory tree looking for items to ignore and uses that file by mistake.
Because the home repository ignores everything, any added file or
directory I want to track in my home repository needs to be added
forcefully: e.g., home add -f <path/to/file>
. (Any empty directory
needs to contain a .gitignore
file to be added, as usual.)
As a result, the repository can live directly in the home directory and
ignore everything by default. Because it uses a custom Git directory,
there's no need to use symbolic linking or copying. It can coexist
alongside anything else that lives in $HOME
, and Git ignores anything
I haven't explicitly told it to track. The only updates it sees are
changes to the files which it does track, which can be committed
normally (e.g., using home commit -av
or similar). If I want to track
something new, I can add it explicitly as I've described above.
See submodules for more about submodules in general and why I use them.
Most of my submodules are Vim plugins, and currently, I install them as
packages to $HOME/.vim/pack/default
. At the same
time, I also add a relative symbolic link from the package directory to
the $HOME/.vim/pack/default/start
directory.
Other submodules go where appropriate, usually in a hidden place if I can manage. See submodules below for more information on setup.
There is an entire local Unix-like hierarchy under
$HOME/.local
. It is complete enough that I can install most
programs to that directory by running ./configure --prefix="$HOME/.local"
, provided the program uses GNU autoconf.
Most of those directories stay empty and stay in the home repository
only so that they will exist for this purpose. However, a couple are
populated with things I want to exist on any computer and which are
machine-independent. For example, there are some scripts in
$HOME/.local/bin
, and there is a Vim/Common Lisp
submodule under $HOME/.local/share
.
For more about the Unix hierarchy, see the hier(7)
manual page
(particularly the "/usr
" section).
Pushing up updates to GitHub is not difficult.
home push
When I pull them down, I also run a command which pulls down any submodule updates I've pushed up previously. The command I use will discover which commit I've updated that submodule to, and then it will rebase the submodule's current branch onto that commit. (This prevents each submodule from being in a "detached HEAD" state at all times so that I can work inside that submodule like a normal Git repository more easily.)
home pull && home submodule update --init --rebase
In my $HOME/.gitconfig
, there is an alias that sets
supdate
to do that awkward submodule command, so the command actually
looks like this when I type it.
home pull && home supdate
In several cases, my home directory includes the entirety of a project from elsewhere. Many of my Vim plugins are included this way since they have their own Git repositories on GitHub. Therefore, I add them to the home repository as submodules, allowing me to incorporate those repositories into my own, yet keeping them and their histories distinct.
There is a little complexity involved. I have to check the submodules for updates and commit those updates to my home repository on a regular basis. When updates have been added in one place, I need to pull down the updates in another place.
At the same time, though, there are advantages. Updates aren't
automatic: I opt into them. I know what each update is, and
I incorporate it intentionally into the home repository. I can undo
any update. Finally, I can track down an update to a submodule which
affected my configuration deleteriously using git-bisect(1)
.
Adding a new submodule also has to be forced, due to the global ignore rules. I always do this with relative paths.
home submodule add -f <repository> <relative/path/to/destination>
If I have added a Vim package, I clone it into
$HOME/.vim/pack/default
, and then from
$HOME/.vim/pack/default/start
,
I symbolically link from the package directory to the current directory
(relatively). That allows adding and removing packages from the current
Vim configuration temporarily by moving the symbolic links only.
Occasionally (perhaps once or twice a week), I update all the submodules to ensure I have the latest versions.
home submodule update --init --remote --rebase
I have this sub-command aliased to supgrade
for easier use.
home supgrade
After doing that, I need to commit whatever submodule pointers have been updated.
home commit -av
Usually I'll call this commit "Submodule updates" and list the submodules which were updated in the description. This is all sort of more manual than a plugin manager, but it allows me to bisect my configuration, in case a submodule changes radically out from under me.
Removing a submodule is rather awkward. In theory, it's possible in
recent versions of Git merely to rm
them.
home rm <path/to/submodule>
Then that change can be committed.
home commit -av
However, I also often make sure the actual files have themselves been cleared out. This may also need to be repeated when the update which commit which removes the submodule is applied on another computer.
This command also leaves the Git directory for the submodule behind, and
it can leave configuration behind as well. Sometimes I'll delete these
as well. Configuration for a submodule lives in .home.git/config
,
not under the submodule directory itself (which normally only contains
a text file called ".git
" which contains the path to that
configuration). That means I use commands like these to clean up.
rm -rf <path/to/submodule>
rm -rf $HOME/.home.git/modules/<path/to/submodule>
This is just extra cleanup that's often not needed but sometimes can help if you add another submodule with the same name or just want to reclaim the space (or peace of mind).
When pulling down updates to a computer after deleting a submodule on
another one, I will do those latter steps because I'm not always
confident the git-submodule(1)
update will clear out what needs to be
cleared.
Below are a few additional notes on the process.
The README can be hidden, too, on macOS—from view in Finder, at least. To do so, run a command to change its "hidden" flag.
chflags hidden $HOME/README.md
This will tidy up your view of your home directory in Finder. The file still exists, and it's visible in any directory listing (even one that doesn't show hidden files, unfortunately), but it will otherwise be out of the way.
I hereby license any original work in this repository into the public domain under the Creative Commons CC0 license. To view a copy of this license, visit https://creativecommons.org/publicdomain/zero/1.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA.
Note that I cannot relicense any anything which is not my own, original work (including but not limited to submodules).