A cross-platform mod manager for Starfield and other games.
- Add, re-order, rename, disable and remove your mods and plugins
- Multiple profiles enable quick switching between different games and mod loadouts
- Root mod support enables management of ENBs, script extenders, and other injectors
- Cross-platform: Native clients for Windows and Linux (including Steam Deck)
- Support for Steam, UWP (Game Pass) and other versions of games
- Per-profile config files and archive invalidation
- Support for FOMOD installers
Releases can be found here:
Starfield Mod Loader currently supports the following games:
- Starfield
- Fallout 4
- Fallout: New Vegas
To install Starfield Mod Loader, simply download the latest release from the releases page and extract the archive to a folder of your choice.
Note: 7-Zip is required to be installed in order to add mods that use RAR archives.
Quick Links:
- Profiles
- Mods
- Plugins
- Config file management
- App settings
- Launching games
- Troubleshooting
Note: This guide refers specifically to Starfield, but most of the information also applies to other games.
To enable mods in Starfield, add the following lines to the StarfieldCustom.ini file in your Documents/My Games/Starfield folder if not already present:
[Archive]
bInvalidateOlderFiles=1
sResourceDataDirsFinal=To add and manage mods you must first create a profile. Upon first launching the app you will be shown a form to create a new profile.
The Mod Base Directory path should be set to the Data folder in either your Documents/My Games/Starfield folder or the game's installation folder (required for SFSE mods).
Note: If you are using the game's Data folder, make sure you rename or delete Documents/My Games/Starfield/Data if it exists, otherwise your mods will not be detected by the game.
The Game Base Directory path should be set to the game's installation directory. By default this will be C:\Program Files (x86)\Steam\steamapps\common\Starfield for Steam or C:\XboxGames\Starfield\Content for UWP/Game Pass, but this may vary depending on where you chose to install the game.
The Game Executable path should point to Starfield.exe (or sfse_loader.exe if using SFSE), which should be in the game base directory from the prior step. Note: You may get an error from Windows Explorer when selecting the UWP version of Starfield.exe that says "You don't have permission to open this file". If this happens, simply copy the path of the file and manually paste it into the input field without using the file explorer.
The Plugin List Path is the location of the plugins.txt file for the game. For Starfield, this is located at <User_Directory>/AppData/Local/Starfield/plugins.txt.
If the Manage Config/INI Files option is enabled, new config files will be created for the profile. When enabled, you must also define the Config Files Directory. For Starfield, this is located at <User_Directory>/Documents/My Games/Starfield by default, but may be different depending on your OS settings.
Upon first enabling the option you will be prompted to copy the existing config files from the Config Files Directory to the profile's config files.
NOTE: When activating mods, the profile's config files will be copied to the Config Files Directory. If any existing config files are in the Config Files Directory when mods are activated, they will be moved to a .sml.bak folder during activation. The files moved to .sml.bak will be restored back to their original location upon deactivating mods.
When Link Mode is enabled, "links" to the mod files will be used instead of copying the files when activating mods. This is significantly faster and uses less disk space. This setting is recommended to be enabled when possible.
NOTE: This setting can only be enabled if Starfield Mod Loader is located on the same disk/partition as the game itself.
Certain games require a feature called Archive Invalidation to properly load mod files. If this setting is enabled, Starfield Mod Loader will automatically enable archive invalidation to ensure all mods are loaded properly.
NOTE: It is recommended to also enable the "Manage Config/INI Files" option. However if it is disabled, and existing config files can be located, archive invalidation can still be enabled.
You can create additional profiles at any time by pressing the Create Profile button above the Mod List section or by selecting Profile > Add New Profile from the the menu bar.
Tip: You can change the app theme at any time under File > Preferences.
Once your profile is set up you can begin adding and managing mods. To add a new mod, click the + icon in the Mod List section and select Add Mod, or select Profile > Mods > Add Mod from the menu bar and choose the mod that you want to install.
Note: You can also import existing mods by clicking the + icon in the Mod List section and select Import Mod, or select Profile > Mods > Import Mod from the menu bar. This will allow you to add a mod from a folder, which can be useful for importing mods from other profiles or sources.
Tip: You can also add mods by dragging and dropping them into the app. This will allow you to install multiple mods at a time.
After choosing a mod to add you will be shown either a FOMOD installer, or the default installation options.
The default installation allows you to rename the mod and select which files from the mod to add. By default, all files from the mod will be added. However, some mods may occasionally contain a non-standard directory structure that can require changing the root data dir, like in the following example:
This mod contains a single root directory called standard that contains an inner Data directory with all of the mod files. We need to mark this inner Data directory as the root data dir in order for the mod to be installed correctly:
Now, only the files in standard/Data directory will be added for this mod.
Some mods are packaged with special metadata known as FOMOD that allows for customizing the installation through a guided flow. Starfield Mod Loader supports FOMOD and will automatically show the installation wizard for FOMOD-compatible mods, as shown in the example below:
The installer will guide you through the installation of the mod. Hovering over or selecting an option will show information about what it does. If you wish to install the mod manually instead, you can click the Manual Install button at the bottom left corner of the installer window.
Note: Many mods will ask you if you are using Vortex or Mod Organizer 2. Starfield Mod Loader supports either option, but if you encounter any issues, select Mod Organizer 2.
Tip: Click the preview image (or the ? tooltip in compact view) to show a fullscreen view of the image.
Root mods are mods that are deployed to the Game Base Directory instead of the Mod Base Directory. This allows for script extenders, DLSS injectors, ENBs, and other types of injectors to be managed as mods in your profile.
To add a root mod, click the + icon in the Mod List section and select Add Root Mod, or select Profile > Mods > Add Root Mod from the menu bar and chose the mod that you want to install.
Mods you have added will appear in your mods list with the load order of that mod shown to the right of its name. You can modify the load order of a mod by dragging and dropping it in the list. Unchecking a mod will disable it and make it inactive. To rename or delete a mod, right click it and select the appropriate option.
You can customize which columns of the mods list are visible under the View > Mod List Columns section of the app menu bar.
Existing game files and other files that have been manually copied to the Mod Base Directory outside of your profile will show up in the UI as External files. When activating mods for a profile that overwrite external files, the original external files will be moved to a folder called .sml.bak while mods are activated. The files in the .sml.bak folder will be restored back to their original location upon deactivating mods.
Once at least one mod with a plugin has been installed, you will see your plugins listed along with their load order. Plugins can be individually disabled or re-ordered by dragging and dropping them. You can right click individual plugins to bring up additional options.
Most games have rules regarding the load order of different types of plugins. For Starfield and other Bethesda games, the order is ESM -> ESL -> ESP. However, mods sometimes contain ESP plugins that are "flagged" as ESM or ESL. While Starfield Mod Loader does not currently parse these flags, you can manually account for this by using plugin type promotion. To promote a plugin to a new type, right-click it and use the "Plugin Type" option to select the new plugin type. Once promoted, the plugin will behave as if it were of the promoted type.
External game plugin management is optional for some games and is required for others. For games where external plugin management is optional, it can be enabled or disabled by pressing the "Manage External Plugins" button at the top left of the plugins list. When enabled, all external game plugin files will be shown in the list and can be re-ordered alongside profile-managed plugins.
You can backup and restore the plugin load order using the buttons at the top right of the plugins list. Pressing the "Restore Plugin Backup" button will show a list of all available plugin order backups that can be restored. You can also export the plugin order in a plugins.txt-compatible format using the "Export Plugins List" button.
If you enabled the Manage Config/INI Files option for your profile, you will be able to select the "Config" option from the dropdown at the top of the Plugins list. From this section you can edit your profile-specific config/INI files.
If profile-managed config/INI files are disabled, you will see an option in the "Actions" section to view external config files if any are found.
To enable mods in the game you must first activate them. Press the Activate Mods button in the Actions section and your mods will be deployed to the Mod Base Directory.
Mods will now remain active until you press the Deactivate Mods button, even if you close the app or restart your PC.
IMPORTANT NOTE: If Link Mode is disabled for the profile and you update any of the profile's mod files externally (i.e. in a text editor) while mods are deployed, make sure to press the Refresh Files button after, otherwise your changes will not be applied.
App settings can be changed via File > Preferences from the menu bar.
Tip (Linux): It is recommended to enable the Normalize path case setting when using Linux with a case-sensitive file system. See here for more info.
You can either click the Start Game button or simply launch the game directly through Steam, Game Pass, etc. Your mods should now be active!
First, make sure you have added the following lines to your StarfieldCustom.ini file:
[Archive]
bInvalidateOlderFiles=1
sResourceDataDirsFinal=If mods still are not working, you may also need to also add these lines to your StarfieldPrefs.ini file.
If you are using the game's installation Data folder as your Mod Base Directory, make sure you delete the Data folder at Documents/My Games/Starfield, otherwise your mods will not be detected by the game. The game will automatically create this folder on game start and when you take in-game screenshots. To change this behavior, you can add the following lines to your StarfieldCustom.ini and StarfieldPrefs.ini files to disable MotD and change your screenshots folder:
[General]
bEnableMessageOfTheDay=0[Display]
sPhotoModeFolder=PhotosThis can happen when very large profiles are activated. If profile verification is taking too long, you can disable verification on app startup via the menu bar under File > Preferences.
Some mods may use different casing for their files/folders (i.e. Interface vs interface) and this can cause issues on case-sensitive file systems, which are often used on Linux. To prevent this issue, you can enable the Normalize path case option under File > Preferences. When this setting is enabled, Starfield Mod Loader will automatically convert all activated mod files and folders to lowercase when appropriate.
When running SFSE via Steam/Proton, Steam will create a new virtual C drive for SFSE that's different from the virtual C drive used for Starfield. This means that when running SFSE, your StarfieldCustom.ini and StarfieldPrefs.ini files will not be loaded, and instead new ones will be created on the new virtual C drive.
To avoid having two separate copies of these files, the easiest solution is to create a symlink on the new virtual C drive to the Documents/My Games/Starfield directory on the original Starfield virtual C drive. This way, both virtual C drives will point to the same Documents/My Games/Starfield directory.
You will first need to figure out the new virtual C drive directory for SFSE, which will be located in ~/.local/share/Steam/steamapps/compatdata. You will see a number of directories in here with numerical IDs. One of these directories corresponds to the game ID that Steam assigned to SFSE. To determine which game ID is the correct one, you can look at the folder's "Date modified" timestamp to figure out which virtual drive directories were created recently. Assuming you added SFSE recently, it should have a Date modified field that matches when SFSE was added.
Once you have figured out the game ID for SFSE, navigate to <sfse_game_id>/pfx/drive_c/users/steamuser/Documents/My Games. Delete the existing Starfield directory inside of this directory and then open a terminal at this directory and run the following command:
# Starfield's game ID is 1716740
ln -s "~/.local/share/Steam/steamapps/compatdata/1716740/pfx/drive_c/users/steamuser/Documents/My Games/Starfield" "./Starfield"This will create a symlink to Starfield's Documents/My Games/Starfield directory, ensuring that SFSE is using the same ini files as the base game.
You must also create a symlink in <sfse_game_id>/pfx/drive_c/users/steamuser/AppData/Local:
# Create a symlink to `/AppData/Local/Starfield`
ln -s "~/.local/share/Steam/steamapps/compatdata/1716740/pfx/drive_c/users/steamuser/AppData/Local/Starfield" "./Starfield"If you run into a problem, please check the issues page to see if your question has been answered or create a new issue if you have a bug to report.
To build and run the app for testing and development, ensure you have Node and NPM installed on your machine and run npm install and npm run start.