labjack/ljm_docker

Provides an image with [LJM](https://labjack.com/ljm) and [LJM-Python](https://labjack.com/support/software/examples/ljm/python).

LabJack LJM Docker Image

Provides an image with LJM and LJM-Python.

LJM supports T-series LabJack devices.

See here for the full list of T-series software options.

Prerequisites

Linux is currently the only supported OS due to the docker run requirements for accessing the network and/or USB device layer. See Run below.

Run

LJM needs permissions to access the host network or the host USB layer.

To run with Ethernet/WiFi access, you need --network=host. For example:

sudo docker run --network=host labjack/ljm

USB access requires udev and the USB device bus shared, and also needs --privileged. For example:

docker run \
    -v /run/udev:/run/udev:ro \
    -v /dev/bus/usb:/dev/bus/usb \
    --privileged \
    labjack/ljm

To run interactively with both USB and network access, for example:

docker run --rm -it \
    -v /run/udev:/run/udev:ro \
    -v /dev/bus/usb:/dev/bus/usb \
    --privileged \
    --network=host \
    labjack/ljm

Example Dockerfile

Example usage:

FROM labjack/ljm:1.2100
WORKDIR /app
ADD . /app # Adds list_connections.py
CMD ["python3", "list_connections.py"]

See example.

Project Life Cycle

Build: make

Clean: make clean

Test: make test

• Currently this just runs a ListAll command and displays the number of connections found.

Publishing a new version

• ubuntu_18/Dockerfile: Replace the LJM installer and LJM-Python URLs
• ubuntu_18/Dockerfile: Replace the LJM installer paths. The URL path may be different.
• Update VERSION, which serves as the tag that will be published
• example/Dockerfile: Update FROM line with the tag you just put in VERSION
• make clean, make, and make test
• docker login, as needed
• Publish: make publish