This library is a forked version of the Conceptinetics DMX library, developed by W.A. van der Meeren. It is forked and developed here under the permissions granted by the LGPL (see below). Original Note from W.A. Van der Meeren: This library has been developed to support the CTC-DRA-13-R2 Isolated DMX-RDM Shield and CTC-DRA-10-1, CTC-DRA-10-R2 Shield on the Arduino platform. However, the use of this library is not limited to the prior mentioned boards. This library works on the principle of using a RS485 driver to drive a DMX line or act as a receiver ( DMX Slave ) If you wish to make additions or find bugs or would like to contribute in any other way then please don't hesitate to contact me via my email address: danny@illogic.nl or use report issues on the Sourceforge project page instead. For information on installing libraries, see: http://arduino.cc/en/Guide/Libraries *** COPYRIGHT STATEMENT *** Copyright (c) 2020 Jeff Glass <glass.jeffrey@gmail.com>. All rights reserved. Copyright (c) 2017 W.A. van der Meeren <danny@illogic.nl>. All right reserved. This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA CHANGE LOG: - 30-Nov-2020: Forked by Jeff Glass - 28-Feb-2017: Fixed various RDM timing issues - 28-Feb-2017: Removed unwanted transmission during line turnaround (RDM) - 28-Feb-2017: Updated break time to 176us to comply specs - 11-Oct-2016: Fix in setting range of channels, end channel does get set now as well to desired value - 23-Apr-2014: Fix to overide possible incorrect USART setting (rdm-alpha) - 17-Apr-2014: RDM responder issue solved in rdm-alpha - 24-jun-2013: Add on receive complete callback to original library as well - 14-jun-2013: Add on receive complete callback to dmx_slave in rdm-alpha library - 26-apr-2013: Add basic Remote Device Management support (alpha) - 14-apr-2013: Fixed startbyte recognition - 03-apr-2013: Fixed memomry allocation in slave