Build script for libcxx+libcxxabi

This is the build script to build libcxx with libcxxabi for x86-64 and arm. These scripts are created for my libcxxabi ARM EHABI support development.

Dependencies

These scripts are tested under Debian Wheezy and Ubuntu 14.04 (host build). You will might need some modification for other platforms or toolchains.

You will need bintuils, gcc, g++, cmake, and clang to build the library. The version of clang should be 3.5 or newer.

Debian Wheezy

Add following line to /etc/apt/sources.list:

# Emdebian for cross-compiling gcc toolchain
deb http://ftp.uk.debian.org/emdebian/toolchains unstable main

# LLVM apt prebuilt binary
deb http://llvm.org/apt/wheezy/ llvm-toolchain-wheezy main
deb-src http://llvm.org/apt/wheezy/ llvm-toolchain-wheezy main

Update the local APT database:

$ sudo apt-get update

Install the dependencies:

$ sudo apt-get install binutils clang-3.5 cmake gcc make

To cross-compile for ARM, install following dependencies as well:

$ sudo apt-get install binutils-multiarch \
                       gcc-4.7-arm-linux-gnueabihf \
                       g++-4.7-arm-linux-gnueabihf

Ubuntu 14.04

Build clang 3.5: You have to build your own copy of clang 3.5 from the official LLVM 3.5 source code. The clang-3.5 package from Ubuntu APT repository won't work.

Update the local APT database:

$ sudo apt-get update

Install the dependencies:

$ sudo apt-get install binutils cmake gcc g++ make

To cross-compile for ARM, install the following dependencies:

$ sudo apt-get install binutils-multiarch \
                       gcc-4.7-arm-linux-gnueabihf \
                       g++-4.7-arm-linux-gnueabihf

NOTE: Although I can compile the libraries successfully, but I can't run the output executables because I don't have ARM Ubuntu installation. It is suggested to cross-compile with Debian Wheezy instead.

Build for x86

To build all libraries from scratch for x86, you can use:

$ ./scripts/compile-all.sh

If everything works fine, then you can run libcxxabi unit tests with:

$ ./out/unittest/run-all.sh

To clean the generated files, you can run:

$ ./scripts/clean.sh

If you wish to build only one library, you can run following commands to build libcxxabi, libcxx, libcxxabi unit tests, respectively,

$ ./scripts/compile-abi.sh
$ ./scripts/compile-libcxx.sh
$ ./scripts/compile-unittest.sh

Build for ARM

To cross compile the libraries for ARM, you have to export following environment variable first:

$ export CROSS_COMPILING=arm

To build all libraries from scratch for ARM with libunwind, you can use:

$ CROSS_COMPILING=arm ENABLE_LIBUNWIND=1 ./scripts/compile-all.sh

The compiled binaries are in the out-arm directory. You can copy them to your ARM testing device. Besides, you can run the libcxxabi unit test with

$ ./out-arm/unittests/run-all.sh