NOTICE FOR BIOS UPDATE

Newer BIOS (e.g. 7D43v17) cause boot to fail at early stage if SetupVirtualMap is set to false

Hence, please set Booter -> Quirks -> SetupVirtualMap to true

For more information, refer to this github issue page: #1

Introduction

This is a repository of Hackintosh EFI for MSI PRO B660M-A WIFI DDR4 (https://www.msi.com/Motherboard/PRO-B660M-A-WIFI-DDR4)

The bluetooth chip AX201 currently works thanks to updates to IntelBluetoothFirmware. Learn more from this github issue page: OpenIntelWireless/IntelBluetoothFirmware#369

I do not have thunderbolt device, so I cannot test for it.

Monterey and Ventura works without problem.

Sonoma works, but Wifi and Bluetooth is not working (For now, due to issue with AirportItlwm.kext)

Other than above, everything should work.

Please report problems you encountered in issues. Feel free to send pull requests.

Please note that you are expected to make some modification to this EFI in order for it to work, which the important steps are described below.

Disable Secure Boot
You may disable CFG lock, so that you can set AppleXcpmCfgLock to False in config.plist

Create installation USB: https://dortania.github.io/OpenCore-Install-Guide/installer-guide/
Copy-paste the 'EFI' folder from this repository into EFI partition of USB installation disk

Kexts and Kernel -> Add (https://dortania.github.io/OpenCore-Install-Guide/ktext.html)
- This repository assume you are installing Monterey or above. If not, remove BluetoolFixup.kext
- This repository assume that you are using intel wifi card. If not, replace AirportItlwm.kext, BluetoolFixup.kext, IntelBluetoothFirmware.kext and IntelBTPatcher.kext with suitable one.
- Adding AGPMInjector.kext is recommended, which improves power management on graphics card. The kext is different from card to card, so please generate it by yourself.
- Since the motherboard USB ports exceeds apple's 15 ports limit, USBMap.kext will disable one of the USB3.2 Gen1 port at the back panel (Blue port). If you want to customize USB mapping, you can replace UTBMap.kext with your own.
  - Remember to include both USBToolBox.kext and UTBMap.kext
  - Do not use USBInjectAll.kext. It cause boot to freeze.
  - Some reported that the UTBMap.kext provided is not working. You may try this UTBMap.kext mentioned in this issue: #1
PlatformInfo (https://dortania.github.io/OpenCore-Install-Guide/config.plist/coffee-lake.html#platforminfo)
- PlatformInfo -> Generic -> MLB
- PlatformInfo -> Generic -> ROM
- PlatformInfo -> Generic -> SystemSerialNumber
- PlatformInfo -> Generic -> SystemUUID
12th gen intel iGPU is not supported. Please disable iGPU and other incompatible eGPU (https://dortania.github.io/OpenCore-Install-Guide/extras/spoof.html)
Other SSDT, kexts, configuration changes related to your configuration

You may set SecureBootModel to j160 after all installation has completed. It was set to Disabled intentionally, as setting this before installation completes can cause boot to fail.