设备预览
lt-zq opened this issue · 9 comments
lt-zq commented
添加了多个设备后,使用同一个流媒体,不同的设备预览的是同一个画面,请问大神是哪里配置错了么?
langmansh commented
推流端口是随机的还是固定?
…------------------ Original ------------------
From: ***@***.***>;
Send time: Tuesday, Jun 1, 2021 5:56 PM
***@***.***>;
***@***.***>;
Subject: [langmansh/AKStreamWebUI] 设备预览 (#17)
添加了多个设备后,使用同一个流媒体,不同的设备预览的是同一个画面,请问大神是哪里配置错了么?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
lt-zq commented
每次请求获取的MainId都是固定的 请问这个是在哪设置的呢
…------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午8:57
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
推流端口是随机的还是固定?
------------------ Original ------------------
From: ***@***.***>;
Send time: Tuesday, Jun 1, 2021 5:56 PM
***@***.***>;
***@***.***>;
Subject:  [langmansh/AKStreamWebUI] 设备预览 (#17)
添加了多个设备后,使用同一个流媒体,不同的设备预览的是同一个画面,请问大神是哪里配置错了么?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
langmansh commented
MainId是第一次启动服务的时候,会自动去获取设备添加到数据库的,MainId在自动添加设备的时候会自动填写的
…------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:04 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
每次请求获取的MainId都是固定的  请问这个是在哪设置的呢
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午8:57
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
推流端口是随机的还是固定?
------------------ Original ------------------
From: ***@***.***>;
Send time: Tuesday, Jun 1, 2021 5:56 PM
***@***.***>;
***@***.***>;
Subject:  [langmansh/AKStreamWebUI] 设备预览 (#17)
添加了多个设备后,使用同一个流媒体,不同的设备预览的是同一个画面,请问大神是哪里配置错了么?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
lt-zq commented
对,可是我手动添加设备(VideoChannels新增一条数据)后,预览返回给我的还是自动添加的那个MainId,导致我的画面还是同一个,是MediaServer只启动一个原因么
…------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午9:05
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
MainId是第一次启动服务的时候,会自动去获取设备添加到数据库的,MainId在自动添加设备的时候会自动填写的
------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:04 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject:  Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
每次请求获取的MainId都是固定的  请问这个是在哪设置的呢
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午8:57
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
推流端口是随机的还是固定?
------------------ Original ------------------
From: ***@***.***>;
Send time: Tuesday, Jun 1, 2021 5:56 PM
***@***.***>;
***@***.***>;
Subject:  [langmansh/AKStreamWebUI] 设备预览 (#17)
添加了多个设备后,使用同一个流媒体,不同的设备预览的是同一个画面,请问大神是哪里配置错了么?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
langmansh commented
手动添加设备的话,不能添加已有的相同设备,比如channel id和sipdeviceid是一样的
…------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:10 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
对,可是我手动添加设备(VideoChannels新增一条数据)后,预览返回给我的还是自动添加的那个MainId,导致我的画面还是同一个,是MediaServer只启动一个原因么
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午9:05
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
MainId是第一次启动服务的时候,会自动去获取设备添加到数据库的,MainId在自动添加设备的时候会自动填写的
------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:04 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject:  Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
每次请求获取的MainId都是固定的  请问这个是在哪设置的呢
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午8:57
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
推流端口是随机的还是固定?
------------------ Original ------------------
From: ***@***.***>;
Send time: Tuesday, Jun 1, 2021 5:56 PM
***@***.***>;
***@***.***>;
Subject:  [langmansh/AKStreamWebUI] 设备预览 (#17)
添加了多个设备后,使用同一个流媒体,不同的设备预览的是同一个画面,请问大神是哪里配置错了么?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
lt-zq commented
明白了 我在试一下 谢谢大神,我在问下 你刚说“推流端口是随机的还是固定”是什么意思呢
…------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午9:11
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
手动添加设备的话,不能添加已有的相同设备,比如channel id和sipdeviceid是一样的
------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:10 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject:  Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
对,可是我手动添加设备(VideoChannels新增一条数据)后,预览返回给我的还是自动添加的那个MainId,导致我的画面还是同一个,是MediaServer只启动一个原因么
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午9:05
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
MainId是第一次启动服务的时候,会自动去获取设备添加到数据库的,MainId在自动添加设备的时候会自动填写的
------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:04 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject:  Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
每次请求获取的MainId都是固定的  请问这个是在哪设置的呢
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午8:57
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
推流端口是随机的还是固定?
------------------ Original ------------------
From: ***@***.***>;
Send time: Tuesday, Jun 1, 2021 5:56 PM
***@***.***>;
***@***.***>;
Subject:  [langmansh/AKStreamWebUI] 设备预览 (#17)
添加了多个设备后,使用同一个流媒体,不同的设备预览的是同一个画面,请问大神是哪里配置错了么?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
langmansh commented
随机端口就是每次推流会随机打开已个端口,固定端口就是所有设备都会往一个端口上推
…------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:15 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
明白了 我在试一下 谢谢大神,我在问下 你刚说“推流端口是随机的还是固定”是什么意思呢
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午9:11
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
手动添加设备的话,不能添加已有的相同设备,比如channel id和sipdeviceid是一样的
------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:10 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject:  Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
对,可是我手动添加设备(VideoChannels新增一条数据)后,预览返回给我的还是自动添加的那个MainId,导致我的画面还是同一个,是MediaServer只启动一个原因么
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午9:05
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
MainId是第一次启动服务的时候,会自动去获取设备添加到数据库的,MainId在自动添加设备的时候会自动填写的
------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:04 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject:  Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
每次请求获取的MainId都是固定的  请问这个是在哪设置的呢
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午8:57
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
推流端口是随机的还是固定?
------------------ Original ------------------
From: ***@***.***>;
Send time: Tuesday, Jun 1, 2021 5:56 PM
***@***.***>;
***@***.***>;
Subject:  [langmansh/AKStreamWebUI] 设备预览 (#17)
添加了多个设备后,使用同一个流媒体,不同的设备预览的是同一个画面,请问大神是哪里配置错了么?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
lt-zq commented
懂了 谢谢大神解惑
…------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午9:17
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
随机端口就是每次推流会随机打开已个端口,固定端口就是所有设备都会往一个端口上推
------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:15 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject:  Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
明白了 我在试一下 谢谢大神,我在问下 你刚说“推流端口是随机的还是固定”是什么意思呢
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午9:11
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
手动添加设备的话,不能添加已有的相同设备,比如channel id和sipdeviceid是一样的
------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:10 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject:  Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
对,可是我手动添加设备(VideoChannels新增一条数据)后,预览返回给我的还是自动添加的那个MainId,导致我的画面还是同一个,是MediaServer只启动一个原因么
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午9:05
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
MainId是第一次启动服务的时候,会自动去获取设备添加到数据库的,MainId在自动添加设备的时候会自动填写的
------------------ Original ------------------
From: ***@***.***>;
Send time: Wednesday, Jun 2, 2021 9:04 AM
***@***.***>;
***@***.***>; ***@***.***>;
Subject:  Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
每次请求获取的MainId都是固定的  请问这个是在哪设置的呢
------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午8:57
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
推流端口是随机的还是固定?
------------------ Original ------------------
From: ***@***.***>;
Send time: Tuesday, Jun 1, 2021 5:56 PM
***@***.***>;
***@***.***>;
Subject:  [langmansh/AKStreamWebUI] 设备预览 (#17)
添加了多个设备后,使用同一个流媒体,不同的设备预览的是同一个画面,请问大神是哪里配置错了么?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
lt-zq commented
问题已经解决了,再次感谢大神
…------------------ 原始邮件 ------------------
发件人: "langmansh/AKStreamWebUI" ***@***.***>;
发送时间: 2021年6月2日(星期三) 上午9:24
***@***.***>;
***@***.******@***.***>;
主题: Re: [langmansh/AKStreamWebUI] 设备预览 (#17)
Closed #17.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.