ivt_rego638
Read registers from IVT Rego638 and send via MQTT & Wifi to Homeassistant
Todo
- Build the openhab circuit with a logic gate to act as a buffer for the weak logic signal from the rego6xx.
- Verify clean logic signal, then the code in this repo should work.
- Add MQTT to send all sensor and device values to Home Assistant
Links
- https://www.openhab.org/addons/bindings/regoheatpump/
- http://rago600.sourceforge.net/
- https://forum.arduino.cc/t/read-out-from-heatpump/404703/53
- https://varmepump.one/docs/h60-manual/home-assistant-integration/configuration-yaml-sample-config/
- https://github.com/johellstrand/rego637_v304/blob/master/rego_funcs.h
- https://www.varmepumpsforum.com/vpforum/index.php?topic=20261.120
- https://community.openhab.org/t/new-binding-rego-6xx-based-heat-pumps/17219
- https://github.com/crnjan/rego-simulator
- https://www.mouser.se/datasheet/2/143/EVER_S_A0000095164_1-2548621.pdf