EARLY PROTO/DRAFT :)
A small post about the project can be found here
This project contains firmware to make a bridge between a standard USB HID mouse and a very simplified BLE GATT service.
The GATT service exposes characteristics to control mouse movement and button presses.
Besides the main example web app, there is also a very simple example web application that creates a feedback from keyboard key presses over BLE GATT, resulting in mouse movements/button presses:
- A,S,D,W = movement
- 1,2,3 = left, middle, right buttons
- Install nrfutil (see here).
- Download the latest release zip file from here
- Insert the dongle, press the tiny side/DFU button to enable DFU mode (board starts flashing red) and write:
nrfutil dfu serial -pkg SimpleMouse_nRF52840Dongle.zip -p /dev/ttyACM0
NOTE: /dev/ttyACM0 might be named different on your system (see the zephyr documentation linked above for nrfutil)