Arduino BLE-MIDI Transport

This library implements the BLE-MIDI transport layer for the FortySevenEffects Arduino MIDI Library

Installation

This library depends on the Arduino MIDI Library.

When installing this library from the Arduino IDE, the dependency be downloaded and installed in the same directory as this library. (Thanks to the depends clause in library.properties)

When manually installing this library, you have to manually download Arduino MIDI Library from github and install it in the same directory as this library - without this additional install, this library will not be able to compile.

When using ESP32 consider using NimBLE (NimBLE-Arduino). When using the Arduino NANO 33 BLE or Arduino NANO RP2040 Connect, you must install ArduinoBLE

Usage

Basic / Default

#include <BLEMIDI_Transport.h>
#include <hardware/BLEMIDI_ESP32.h>
...
BLEMIDI_CREATE_DEFAULT_INSTANCE()
...
void setup()
{
   MIDI.begin();
...
void loop()
{
   MIDI.read();

will create a instance named BLEMIDI and listens to incoming MIDI.

using NimBLE for ESP32 with a custom name and turns LED on when its connected

#include <BLEMIDI_Transport.h>
#include <hardware/BLEMIDI_ESP32_NimBLE.h>
...
BLEMIDI_CREATE_INSTANCE("CustomName", MIDI)
...
void setup()
{
  pinMode(LED_BUILTIN, OUTPUT);
  digitalWrite(LED_BUILTIN, LOW);

  BLEMIDI.setHandleConnected(OnConnected);
  BLEMIDI.setHandleDisconnected(OnDisconnected);
  
  MIDI.begin();
...
void loop()
{
  MIDI.read();
...
void OnConnected() {
  digitalWrite(LED_BUILTIN, HIGH);
}

void OnDisconnected() {
  digitalWrite(LED_BUILTIN, LOW);
}

will create a instance named BLEMIDI and listens to incoming MIDI.

Tested boards/modules

ESP32 (OOB BLE and NimBLE)
Arduino NANO 33 BLE
Arduino NANO RP2040 Connect

Other Transport protocols:

The libraries below the same calling mechanism (API), making it easy to interchange the transport layer.