laurb9/PanoController-Firmware

Issues

• flash socket for shutter feedback ?

  #54 opened 9 years ago by laurb9
  3

• Remember vertical position

  #7 opened 9 years ago by laurb9
  3

• Backlash compensation

  #49 opened 9 years ago by laurb9
  2

• ESP32 support

  #73 opened 4 years ago by laurb9
  1

• Keep motors off if battery power below voltage threshold

  #64 opened 8 years ago by laurb9
  2

• G-Code loops

  #66 opened 7 years ago by laurb9
  1

• IR shutter remote

  #50 opened 9 years ago by laurb9
  6

• Repeat shot if motion detected

  #52 opened 9 years ago by laurb9
  1

• Integrate MPU6050 DMP library or ?

  #53 opened 9 years ago by laurb9
  1

• Pano log

  #48 opened 9 years ago by laurb9
  4

• Set pano dimensions by moving platform by hand

  #42 opened 9 years ago by laurb9
  2

• Level Indicator

  #39 opened 9 years ago by laurb9
  1

• Load-dependent movement

  #40 opened 9 years ago by laurb9
  1

• Lower current for maintaining position

  #41 opened 9 years ago by laurb9
  2

• Investigate BDC (brushless DC) or servos instead of steppers

  #14 opened 9 years ago by laurb9
  1

• Add compass support

  #12 opened 9 years ago by laurb9
  1

• Standby Mode

  #20 opened 9 years ago by laurb9
  3

• Auto Shutter mode (maybe never)

  #5 opened 9 years ago by laurb9
  1

• G-code ?

  #65 opened 7 years ago by laurb9
  0

• zero motion, shutter and bracketing/HDR

  #44 opened 7 years ago by laurb9
  4

• Determine gear ratio using gyro

  #51 opened 7 years ago by laurb9
  1

• Real Time Clock

  #47 opened 7 years ago by laurb9
  4

• Redesign pano operation display

  #35 opened 7 years ago by laurb9
  2

• Direct current control

  #19 opened 7 years ago by laurb9
  3

• Need column-first mode

  #32 opened 7 years ago by laurb9
  1

• Support 16:9 and 1:1 modes

  #17 opened 7 years ago by laurb9
  1

• Bluetooth 4.1 support

  #10 opened 7 years ago by laurb9
  6

• Precise positioning difficult for long zoom

  #62 opened 7 years ago by laurb9
  1

• Smooth out motor movement

  #6 opened 7 years ago by laurb9
  2

• Need higher shutter speeds

  #63 opened 8 years ago by laurb9
  0

• Break code into platform module and remote control module

  #58 opened 8 years ago by laurb9
  1

• Add radio transmitter (opt)

  #9 opened 8 years ago by laurb9
  6

• Single-board PanoController example no longer works

  #61 opened 8 years ago by laurb9
  0

• SAMD support (Adafruit Feather M0)

  #59 opened 8 years ago by laurb9
  3

• Refactor menu system

  #60 opened 8 years ago by laurb9
  1

• Stop supporting 8-bit AVR (AtMega328)

  #57 opened 8 years ago by laurb9
  2

• Release SPI0 pins (10,11,12,13)

  #56 opened 8 years ago by laurb9
  1

• decode flash protocols ?

  #55 opened 9 years ago by laurb9
  0

• PCB board

  #13 opened 9 years ago by laurb9
  0

• Zero-motion shutter delay mode (gyro-based)

  #11 opened 9 years ago by laurb9
  0

• Next row position is offset to the left

  #37 opened 9 years ago by laurb9
  0

• Hanging setting up tall pano with wide lens

  #36 opened 9 years ago by laurb9
  0

• Pre-generate focal-length to FOV tables

  #16 opened 9 years ago by laurb9
  2

• 360 pano is not continuous

  #29 opened 9 years ago by laurb9
  0

• Increase movement precision

  #15 opened 9 years ago by laurb9
  0

• Hangs when returning from pano setup via IR remote.

  #24 opened 9 years ago by laurb9
  1

• Add batery voltage monitor

  #18 opened 9 years ago by laurb9
  1

• Add IR receiver

  #8 opened 9 years ago by laurb9
  0

• Add a start delay

  #22 opened 9 years ago by laurb9
  0

• progress bar

  #21 opened 9 years ago by laurb9
  0