/pyGT511C3

Python driver for Fingerprint Scanner - TTL (GT-511C3)

Primary LanguagePython

pyGT511C3

Python driver for Fingerprint Scanner - TTL (GT-511C3)

https://www.sparkfun.com/products/11792

This is the Python Non Official Version for Sparkfun GT511C3 Fingerprint Scanner

I was made a payment application that uses this fingerprint scanner in a computer version for Windows and Mac and I encountered that Sparkfun don't have a python driver demo or example for this device

I have studied the datasheet http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Biometric/GT-511C3_datasheet_V1%201_20130411[4].pdf and I have programmed this driver based in standard TTL behavior

I have been tested with Windows COM3 and /dev/cu.usbserial-A601EQ14

For /dev/cu.usbserial-A601EQ14 and COM3 you need an FTDI device that converts the USB protocol to serial commands More info in: https://www.sparkfun.com/products/9873

Now supports Raspberry PI GPIO port '/dev/ttyAMA0' too!

If you have any comments or contribution code for this project you are welcome!