MediaPlayerPiInit - a Collection of scripts to make the Installation easier

Prepare SD card for Raspberry Pi

Download the latest Raspbian lite from here and upload it to the SD card with Etcher or ApplePi-Baker or your preffered tool.

To enable SSH create a file called ssh on the boot partition of the SD card. And prepare to connect it to WiFi

touch /Volumes/boot/ssh
touch /Volumes/boot/wpa_supplicant.conf

Edit the wpa_supplicant.conf file an add the following (don't forget to adjust to your needs):

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=«your_ISO-3166-1_two-letter_country_code»

network={
    ssid="«your_SSID»"
    psk="«your_PSK»"
    key_mgmt=WPA-PSK
}

After booting the Raspberry Pi you should be able to access it by SSH.

ssh pi@raspberry.local

Configure Raspberry Pi and install dependencies.

When you login by ssh you can download the init script.

wget https://raw.githubusercontent.com/lazyzero/MediaPlayerPiInit/master/init.sh
chmod +x init.sh
./init.sh

Change the hostname by editing the /etc/hostname.

Change the password of the user pi with passwd.