Fuse Ext2

Fuse-ext2 is an EXT2/EXT3/EXT4 filesystem for FUSE, and is built to work with osxfuse.

Dependencies

Fuse-ext2 requires at least Fuse version 2.6.0 for Linux.
Fuse-ext2 requires at least Fuse for macOS version 2.7.5 or greater.

Linux: Fuse
macOS: Fuse for macOS

Alternate Install method of Fuse for macOS

Fuse for macOS can be installed via homebrew if Homebrew-Cask has been tapped.

To tap Homebrew-Cask:

brew tap homebrew/cask

To verify that the the above tap is a part of brew:

brew tap

Look for homebrew/cask in the output.

To install Fuse for macOS using brew:

brew cask install osxfuse

Building

Debian/Ubuntu:

Building from source depends on the following:

m4
autoconf
automake
libtool
libfuse-dev
e2fsprogs
comerr-dev
e2fslibs-dev

$ sudo apt-get install m4 autoconf automake libtool
$ sudo apt-get install libfuse-dev e2fsprogs comerr-dev e2fslibs-dev
	
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install

Fedora

$ sudo dnf install @development-tools m4 autoconf automake libtool e2fsprogs libcom_err-devel fuse-libs e2fsprogs-devel
# build part 
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install

You can use checkinstall or some other equivalent tool to generate an install package for your distribution.

FreeBSD:

Install via pkg:

$ pkg install sysutils/fusefs-ext2

Building via ports:

$ cd /usr/ports/sysutils/fusefs-ext2
$ make install clean

macOS:

Dependencies:

OSXfuse

Building from source depends on the following:

m4
autoconf
automake
libtool
e2fsprogs
xcode-select

Copy and paste this into a file such as /tmp/ext4/script.sh, but do not name the file install.sh. Remember to chmod +x script.sh. Run it from that directory - ./script.sh

#!/bin/sh
export PATH=/opt/gnu/bin:$PATH
export PKG_CONFIG_PATH=/opt/gnu/lib/pkgconfig:/usr/local/lib/pkgconfig:$PKG_CONFIG_PATH

mkdir fuse-ext2.build
cd fuse-ext2.build

if [ ! -d fuse-ext2 ]; then
    git clone https://github.com/alperakcan/fuse-ext2.git	
fi

# m4
if [ ! -f m4-1.4.17.tar.gz ]; then
    curl -O -L http://ftp.gnu.org/gnu/m4/m4-1.4.17.tar.gz
fi
tar -zxvf m4-1.4.17.tar.gz 
cd m4-1.4.17
./configure --prefix=/opt/gnu
make -j 16
sudo make install
cd ../
    
# autoconf
if [ ! -f autoconf-2.69.tar.gz ]; then
    curl -O -L http://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz
fi
tar -zxvf autoconf-2.69.tar.gz 
cd autoconf-2.69
./configure --prefix=/opt/gnu
make
sudo make install
cd ../
    
# automake
if [ ! -f automake-1.15.tar.gz ]; then
    curl -O -L http://ftp.gnu.org/gnu/automake/automake-1.15.tar.gz
fi
tar -zxvf automake-1.15.tar.gz 
cd automake-1.15
./configure --prefix=/opt/gnu
make
sudo make install
cd ../
    
# libtool
if [ ! -f libtool-2.4.6.tar.gz ]; then
    curl -O -L http://ftpmirror.gnu.org/libtool/libtool-2.4.6.tar.gz
fi
tar -zxvf libtool-2.4.6.tar.gz 
cd libtool-2.4.6
./configure --prefix=/opt/gnu
make
sudo make install
cd ../

# e2fsprogs
if [ ! -f e2fsprogs-1.43.4.tar.gz ]; then
    curl -O -L https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/v1.43.4/e2fsprogs-1.43.4.tar.gz
fi
tar -zxvf e2fsprogs-1.43.4.tar.gz
cd e2fsprogs-1.43.4
./configure --prefix=/opt/gnu --disable-nls
make
sudo make install
sudo make install-libs
sudo cp /opt/gnu/lib/pkgconfig/* /usr/local/lib/pkgconfig
cd ../
    
# fuse-ext2
export PATH=/opt/gnu/bin:$PATH
export PKG_CONFIG_PATH=/opt/gnu/lib/pkgconfig:/usr/local/lib/pkgconfig:$PKG_CONFIG_PATH

cd fuse-ext2
./autogen.sh
CFLAGS="-idirafter/opt/gnu/include -idirafter/usr/local/include/osxfuse/" LDFLAGS="-L/opt/gnu/lib -L/usr/local/lib" ./configure
make
sudo make install

Test

The e2fsprogs live in /opt/gnu/bin and /opt/gnu/sbin. fuse-ext2 is in /usr/local/bin.

cd
dd if=/dev/zero of=/tmp/test-fs.ext4 bs=1024 count=102400  
/opt/gnu/sbin/mkfs.ext4 /tmp/test-fs.ext4
mkdir -p ~/mnt/fuse-ext2.test-fs.ext4
fuse-ext2  /tmp/fuse-ext2.test-fs.ext4 -o rw+,allow_other,uid=501,gid=20

To verify the UID and GID of the user mounting the file system:

id

To verify the file system has mounted properly:

mount

Usage

See the Man page for options.

Usage:    fuse-ext2 <device|image_file> <mount_point> [-o option[,...]]

Options:  ro, rw+, force, allow_other
          Please see details in the manual.

Example:  fuse-ext2 /dev/sda1 /mnt/sda1

Bugs

Multithread support is broken for now, so fuse operates in a single thread.
There are no known bugs for read-only mode, read only mode should be ok for everyone.
Even though write support is available, please do not mount your filesystems with write support unless you have nothing to lose.

Please send the output of the command below when reporting bugs as a GitHub Issue. Before submitting a bug report, please look at the existing issues first.

$ /usr/local/bin/fuse-ext2 -v /dev/path /mnt/point -o debug

Important: Partition Labels

Please do not use commas , in partition labels.

Wrong: e2label /dev/disk0s3 "linux,ext3"

Correct: e2label /dev/disk0s3 "linux-ext3"

Contact

Alper Akcan alper.akcan@gmail.com

learningendless/fuse-ext2