Terminology 0.9.1 ****************************************************************************** FOR ANY ISSUES PLEASE OPEN A TICKET: https://phab.enlightenment.org/maniphest/task/create/ ****************************************************************************** Requirements: ------------- * efl (>= 1.8.0) * elementary (>= 1.8.0) Please note that some features may not quite function correctly or completely on EFL 1.8. Newer versions would be better. Please see http://www.enlightenment.org for information on these. This is an EFL terminal emulator with some extra bells and whistles. Compiling: ---------- Once you have met requirements, compiling and installing is simple: ./configure make make install Note: to make terminology work with input methods in general you need: export ECORE_IMF_MODULE="xim" export XMODIFIERS="@im=none" Default key controls: Shift+PgUp = Scroll 1 page up Shift+PgDn = Scroll 1 page down Shift+Up = Scroll 1 line up Shift+Down = Scroll 1 line down Shift+Home = Scroll to the top of the backlog Shift+End = Reset scroll Shift+Left = switch focus to previous terminal inside a window Shift+Right = switch focus to next terminal inside a window Shift+Insert = Paste Clipboard (ctrl+v/c) selection Shift+Ctrl+Insert = Paste Primary (highlight) selection Shift+Keypad-Plus = Font size up 1 Shift+Keypad-Minus = Font size down 1 Shift+Keypad-Multiply = Reset font size Shift+Keypad-Divide = Copy highlight to Clipboard (same as ctrl+c in gui apps) Ctrl+PgUp = switch focus to previous terminal inside a window Ctrl+PgDn = switch focus to next terminal inside a window Ctrl+Shift+t = create new terminal on top of current inside window (tabs) Ctrl+Shift+End = close the focused terminal. Ctrl+Shift+h = toggle displaying the miniview of the history Ctrl+Shift+Home = bring up "tab" switcher Ctrl+Shift+PgUp = split terminal horizontally (1 term above the other) Ctrl+Shift+PgDn = split terminal vertically (1 term to the left of the other) Ctrl+Shift+c = copy current selection to clipboard Ctrl+Shift+v = paste current clipboard selection Alt+Home = Enter command mode (enter commands to control terminology itself) Alt+Return = Paste primary selection Alt+w = Copy selection to primary Ctrl+Alt+Equal = Font size up 1 Ctrl+Alt+Minus = Font size down 1 Ctrl+Alt+0 = Reset font size Ctrl+Alt+9 = Big font size Ctrl+Alt+t = Set terminal title Ctrl+1 = switch to terminal tab 1 Ctrl+2 = switch to terminal tab 2 Ctrl+3 = switch to terminal tab 3 Ctrl+4 = switch to terminal tab 4 Ctrl+5 = switch to terminal tab 5 Ctrl+6 = switch to terminal tab 6 Ctrl+7 = switch to terminal tab 7 Ctrl+8 = switch to terminal tab 8 Ctrl+9 = switch to terminal tab 9 Ctrl+0 = switch to terminal tab 10 Command mode commands currently understood: f = Reset font to default setting saved in config f+ = Increase fontsize f- = Decrease fontsize fb = Display big font size (10x20 bitmap, or size 20 with scalable). gNxM = make terminal NxM chars in size (if possible). e.g. g80x48 g40x20. If just one number is provided, it will use the following shortcuts: g0=80x24; g1=80x40; g2=80x60; g3=80x80; g4=120x24; g5=120x40; g6=120x60; g7=120x80; g8=120x120 b = reset the background (no media) bPATH = set the background media to an absolute file PATH Mouse controls: Right mouse button = controls menu Middle mouse button = paste highlight selection Left mouse button/drag = make highlight Wheel = scroll up or down in history Ctrl+Wheel = zoom font size up/down Ctrl+Left mouse button/drag = make block selection highlight Extended escapes for terminology only: [\033][}][COMMAND][\000] i.e. 1. ESC char (\033 or 0x1b) 2. } char 3... sequence of UTF8 chars other than nul (\000 or 0x00). 4 \000 char (nul byte or 0x00 to indicate end of sequence) e.g. echo -n '\033}Hello world\000' Commands: any values inside square brackets [] are to be replaced by some content (numbers, strings, paths, url's etc.). example: aa[PATH-OF-FILE] should become something like: aa/tmp/file.png or aa[true/false] should become something like: aatrue or aafalse Themes: Themes can be stored in ~/.config/terminology/themes/ . --- pn[FULL-PATH-OR-URL] = popup the given media file/url now pq[FULL-PATH-OR-URL] = queue a popup for the given media file/url bt[FULL-PATH-OR-URL] = set the terminal background media file/url temporarily bp[FULL-PATH-OR-URL] = set the terminal background media file/url permanently at[on/true/yes/off/false/no] = set the terminal alpha state to be on, or off temporarily ap[on/true/yes/off/false/no] = set the terminal alpha state to be on, or off permanently qs = query grid and font size. stdin will have written to it: W;H;FW;FH\n where W is the width of the terminal grid in characters where H is the height of the terminal grid in characters where FW is the width of 1 character cell in pixels where FH is the height of 1 character cell in pixels is[CW;H;FULL-PATH-OR-URL] = insert STRETCHED media (where image will stretch to fill the cell area) and define expected cell area to be W cells wide and H cells high, with the image/media/url. where C is the replace character to be identified in later text where W is the width in character cells (up to 511). where H is the height in character cells (up to 511). note that this escape alone has no effect. it indicates a future intention of inserting media into the terminal. the terminal will EXPECT a grid of WxH "replace characters" to follow, with each sequence of such replace characters beginning with a 'ib' escape command and ending with an 'ie' escape command. the FULL-PATH-OR-URL for all the i commands (is, ic, if, it) may be of the form: /full/path/to/file.png OR /full/path/to/link\n/full/path/to/file.png where a newline character separates a URI for a link and a full path to a file to display in the region. the link is the destination URI when a user may click on the given media image. example: printf("\033}is#5;3;%s\000" "\033}ib\000#####\033}ie\000\n" "\033}ib\000#####\033}ie\000\n" "\033}ib\000#####\033}ie\000\n", "/tmp/icon.png"); note that '#' is the replace character, and later '#' chars if inside begin/end escapes, will be replaced by the given media indicated in the insert media escape. ic[CW;H;FULL-PATH-OR-URL] = insert CENTERED media (centered in cell area). otherwise parameters are identical to the "is" command, but retains aspect and is padded by blank space. if[CW;H;FULL-PATH-OR-URL] = insert FILLED media (fill in cell area). otherwise parameters are identical to the "is" command but ensures the entire area is filled like a background even if media goes beyond cell bounds and is clipped. it[CW;H;FULL-PATH-OR-URL] = insert THUMB media (thumbnail cell area). otherwise parameters are identical to the "is" command, but uses thumbnail generation to make a fast to load but low resolution version (cached) of the media. it[CW;H;LINK\nFULL-PATH-OR-URL] = insert THUMB media (thumbnail cell area). otherwise parameters are identical to the "is" command, but uses thumbnail generation to make a fast to load but low resolution version (cached) of the media. LINK is a path (or url) to open WHEN the thumb is clicked on by the user. ij[CW;H;FULL-PATH\nGROUP][\n][cmd1][\r\n][cmd2]... = insert EDJE object with file path given, and the group name given. the command list (and the \n whitespace delimiter before the list) is optional, but is executed/parsed before display of the actual object to do things like initialize its initial state. see "iC" command for more details on the command list. be aware that once you have an object with an assigned channel id, it can send back signals and messages via escapes on stdin. these escapes will follow terminology extended escape format (ESC + } ... \000), and the content will be one of: ;CHID\ndrag\nPART NAME\nVAL1\nVAL2 ;CHID\ndrag,start\nPART NAME\nVAL1\nVAL2 ;CHID\ndrag,stop\nPART NAME\nVAL1\nVAL2 ;CHID\ndrag,step\nPART NAME\nVAL1\nVAL2 ;CHID\drag,set\nPART NAME\nVAL1\nVAL2 signal;CHID\nSIGNAL STRING\nSOURCE STRING message;CHID\nOPCODE ID\nstring\nSTRING1 message;CHID\nOPCODE ID\nint\nINT1 message;CHID\nOPCODE ID\nfloat\nFLOAT1 message;CHID\nOPCODE ID\nstring_set\nSTRING1\nSTRING2\nSTRING3... message;CHID\nOPCODE ID\nint_set\nINT1\nINT2\nINT3... message;CHID\nOPCODE ID\nfloat_set\nFLOAT1\nFLOAT2\nFLOAT3... message;CHID\nOPCODE ID\nstring_int\nSTRING1\nINT1 message;CHID\nOPCODE ID\nstring_float\nSTRING1\nFLOAT1 message;CHID\nOPCODE ID\nstring_int_set\nSTRING1\nINT1\nINT2\nINT3... message;CHID\nOPCODE ID\nstring_float_set\nSTRING1\nFLOAT1\nFLOAT2\nFLOAT3... iC[CHID]\n[cmd1][\r\n][cmd2][\r\n][cmd3]... = send a "command" (cmd1, cmd2, cmd3 etc.) to an existing named channel id "CHID". this can be a list of 1 or more command strings, with each string broken by a continuous sequence of 1 or more \r and/or \n characters. e.g. "\n", "\r", "\r\n", "\n\r", "\n\r\n\n\n", etc. commands understood are: text\nPART NAME\nTEXT STRING set the text of "PART NAME" to string "TEXT STRING" emit\nSIGNAL STRING\nSOURCE STRING emit signal "SIGNAL STRING" "SOURCE STRING" drag\nPART NAME\n[value|size|step|page]\nVAL1\nVAL2 manipulate dragable of name "PART NAME" and either set "value", "size", "step" or "page" properties to "VAL1" and "VAL2" for x and y, where VAL1 and VAL2 are floating point values chid\nCHANNEL ID set the channel id of a given edje object (only valid in setup commands for the inline edje object) to "CHANNEL ID" so it can be addressed later. message\nOPCODE ID\n[string|int|float|string_set|int_set|... float_set|string|int|string_float|string_int_set|... string_float_set]\n[message data] send a message with opcode (integer) id "OPCODE ID" og one of the given types supported ("string", "int", "float", etc.) and then with the given "message data" at the end. message data format depends on message type: string: STRING1 int: INT1 float: FLOAT1 string_set: STRING1\nSTRING2\nSTRING3... int_set: INT1\nINT2\nINT3... float_set: FLOAT1\nFLOAT2\nFLOAT3... string_int: STRING1\nINT1 string_float: STRING1\nFLOAT1 string_int_set: STRING1\nINT1\nINT2\nINT3... string_float_set: STRING1\nFLOAT1\nFLOAT2\nFLOAT3... ib = begin media replace sequence run ie = end media replace sequence run