Fast HTTP implementation for Go.
fasthttp was design for some high performance edge cases. Unless your server/client needs to handle thousands of small to medium requests per seconds and needs a consistent low millisecond response time fasthttp might not be for you. For most cases net/http is much better as it's easier to use and can handle more cases. For most cases you won't even notice the performance difference.
fasthttp是为一些高性能的边缘情况设计的。除非你的服务器/客户端需要每秒钟处理数以千计的中小型请求，并且需要一个稳定的低毫秒的响应时间，否则fasthttp可能不适合你。对于大多数情况来说，net/http要好得多，因为它更容易使用并且可以处理更多的情况。在大多数情况下，你甚至不会注意到性能的差别。
Currently fasthttp is successfully used by VertaMedia in a production serving up to 200K rps from more than 1.5M concurrent keep-alive connections per physical server.
目前，fasthttp被VertaMedia成功地用于生产中，为每台物理服务器上超过1.5M的并发保持连接提供高达200K rps的服务。
TechEmpower Benchmark round 19 results
Switching from net/http to fasthttp
HTTP server performance comparison with net/http
In short, fasthttp server is up to 10 times faster than net/http. Below are benchmark results.
简而言之，fasthttp服务器比net/http快10倍。 下面是基准测试结果。
GOMAXPROCS=1
net/http server:
$ GOMAXPROCS=1 go test -bench=NetHTTPServerGet -benchmem -benchtime=10s
BenchmarkNetHTTPServerGet1ReqPerConn 1000000 12052 ns/op 2297 B/op 29 allocs/op
BenchmarkNetHTTPServerGet2ReqPerConn 1000000 12278 ns/op 2327 B/op 24 allocs/op
BenchmarkNetHTTPServerGet10ReqPerConn 2000000 8903 ns/op 2112 B/op 19 allocs/op
BenchmarkNetHTTPServerGet10KReqPerConn 2000000 8451 ns/op 2058 B/op 18 allocs/op
BenchmarkNetHTTPServerGet1ReqPerConn10KClients 500000 26733 ns/op 3229 B/op 29 allocs/op
BenchmarkNetHTTPServerGet2ReqPerConn10KClients 1000000 23351 ns/op 3211 B/op 24 allocs/op
BenchmarkNetHTTPServerGet10ReqPerConn10KClients 1000000 13390 ns/op 2483 B/op 19 allocs/op
BenchmarkNetHTTPServerGet100ReqPerConn10KClients 1000000 13484 ns/op 2171 B/op 18 allocs/op
fasthttp server:
$ GOMAXPROCS=1 go test -bench=kServerGet -benchmem -benchtime=10s
BenchmarkServerGet1ReqPerConn 10000000 1559 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet2ReqPerConn 10000000 1248 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet10ReqPerConn 20000000 797 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet10KReqPerConn 20000000 716 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet1ReqPerConn10KClients 10000000 1974 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet2ReqPerConn10KClients 10000000 1352 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet10ReqPerConn10KClients 20000000 789 ns/op 2 B/op 0 allocs/op
BenchmarkServerGet100ReqPerConn10KClients 20000000 604 ns/op 0 B/op 0 allocs/op
GOMAXPROCS=4
net/http server:
$ GOMAXPROCS=4 go test -bench=NetHTTPServerGet -benchmem -benchtime=10s
BenchmarkNetHTTPServerGet1ReqPerConn-4 3000000 4529 ns/op 2389 B/op 29 allocs/op
BenchmarkNetHTTPServerGet2ReqPerConn-4 5000000 3896 ns/op 2418 B/op 24 allocs/op
BenchmarkNetHTTPServerGet10ReqPerConn-4 5000000 3145 ns/op 2160 B/op 19 allocs/op
BenchmarkNetHTTPServerGet10KReqPerConn-4 5000000 3054 ns/op 2065 B/op 18 allocs/op
BenchmarkNetHTTPServerGet1ReqPerConn10KClients-4 1000000 10321 ns/op 3710 B/op 30 allocs/op
BenchmarkNetHTTPServerGet2ReqPerConn10KClients-4 2000000 7556 ns/op 3296 B/op 24 allocs/op
BenchmarkNetHTTPServerGet10ReqPerConn10KClients-4 5000000 3905 ns/op 2349 B/op 19 allocs/op
BenchmarkNetHTTPServerGet100ReqPerConn10KClients-4 5000000 3435 ns/op 2130 B/op 18 allocs/op
fasthttp server:
$ GOMAXPROCS=4 go test -bench=kServerGet -benchmem -benchtime=10s
BenchmarkServerGet1ReqPerConn-4 10000000 1141 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet2ReqPerConn-4 20000000 707 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet10ReqPerConn-4 30000000 341 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet10KReqPerConn-4 50000000 310 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet1ReqPerConn10KClients-4 10000000 1119 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet2ReqPerConn10KClients-4 20000000 644 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet10ReqPerConn10KClients-4 30000000 346 ns/op 0 B/op 0 allocs/op
BenchmarkServerGet100ReqPerConn10KClients-4 50000000 282 ns/op 0 B/op 0 allocs/op
In short, fasthttp client is up to 10 times faster than net/http. Below are benchmark results.
GOMAXPROCS=1
net/http client:
$ GOMAXPROCS=1 go test -bench='HTTPClient(Do|GetEndToEnd)' -benchmem -benchtime=10s
BenchmarkNetHTTPClientDoFastServer 1000000 12567 ns/op 2616 B/op 35 allocs/op
BenchmarkNetHTTPClientGetEndToEnd1TCP 200000 67030 ns/op 5028 B/op 56 allocs/op
BenchmarkNetHTTPClientGetEndToEnd10TCP 300000 51098 ns/op 5031 B/op 56 allocs/op
BenchmarkNetHTTPClientGetEndToEnd100TCP 300000 45096 ns/op 5026 B/op 55 allocs/op
BenchmarkNetHTTPClientGetEndToEnd1Inmemory 500000 24779 ns/op 5035 B/op 57 allocs/op
BenchmarkNetHTTPClientGetEndToEnd10Inmemory 1000000 26425 ns/op 5035 B/op 57 allocs/op
BenchmarkNetHTTPClientGetEndToEnd100Inmemory 500000 28515 ns/op 5045 B/op 57 allocs/op
BenchmarkNetHTTPClientGetEndToEnd1000Inmemory 500000 39511 ns/op 5096 B/op 56 allocs/op
fasthttp client:
$ GOMAXPROCS=1 go test -bench='kClient(Do|GetEndToEnd)' -benchmem -benchtime=10s
BenchmarkClientDoFastServer 20000000 865 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd1TCP 1000000 18711 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd10TCP 1000000 14664 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd100TCP 1000000 14043 ns/op 1 B/op 0 allocs/op
BenchmarkClientGetEndToEnd1Inmemory 5000000 3965 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd10Inmemory 3000000 4060 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd100Inmemory 5000000 3396 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd1000Inmemory 5000000 3306 ns/op 2 B/op 0 allocs/op
GOMAXPROCS=4
net/http client:
$ GOMAXPROCS=4 go test -bench='HTTPClient(Do|GetEndToEnd)' -benchmem -benchtime=10s
BenchmarkNetHTTPClientDoFastServer-4 2000000 8774 ns/op 2619 B/op 35 allocs/op
BenchmarkNetHTTPClientGetEndToEnd1TCP-4 500000 22951 ns/op 5047 B/op 56 allocs/op
BenchmarkNetHTTPClientGetEndToEnd10TCP-4 1000000 19182 ns/op 5037 B/op 55 allocs/op
BenchmarkNetHTTPClientGetEndToEnd100TCP-4 1000000 16535 ns/op 5031 B/op 55 allocs/op
BenchmarkNetHTTPClientGetEndToEnd1Inmemory-4 1000000 14495 ns/op 5038 B/op 56 allocs/op
BenchmarkNetHTTPClientGetEndToEnd10Inmemory-4 1000000 10237 ns/op 5034 B/op 56 allocs/op
BenchmarkNetHTTPClientGetEndToEnd100Inmemory-4 1000000 10125 ns/op 5045 B/op 56 allocs/op
BenchmarkNetHTTPClientGetEndToEnd1000Inmemory-4 1000000 11132 ns/op 5136 B/op 56 allocs/op
fasthttp client:
$ GOMAXPROCS=4 go test -bench='kClient(Do|GetEndToEnd)' -benchmem -benchtime=10s
BenchmarkClientDoFastServer-4 50000000 397 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd1TCP-4 2000000 7388 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd10TCP-4 2000000 6689 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd100TCP-4 3000000 4927 ns/op 1 B/op 0 allocs/op
BenchmarkClientGetEndToEnd1Inmemory-4 10000000 1604 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd10Inmemory-4 10000000 1458 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd100Inmemory-4 10000000 1329 ns/op 0 B/op 0 allocs/op
BenchmarkClientGetEndToEnd1000Inmemory-4 10000000 1316 ns/op 5 B/op 0 allocs/op
go get -u github.com/valyala/fasthttp
Unfortunately, fasthttp doesn't provide API identical to net/http. See the FAQ for details. There is net/http -> fasthttp handler converter, but it is better to write fasthttp request handlers by hand in order to use all of the fasthttp advantages (especially high performance :) ).
不幸的是，fasthttp并没有提供与net/http相同的API。详情见FAQ。有一个net/http -> fasthttp处理程序转换器，但是为了使用所有fasthttp的优点（特别是高性能:) ），最好是手工编写fasthttp请求处理程序。
Important points:
- Fasthttp works with RequestHandler functions instead of objects implementing Handler interface. Fortunately, it is easy to pass bound struct methods to fasthttp:
Fasthttp与RequestHandler函数一起工作，而不是实现Handler接口的对象。幸运的是，很容易将绑定的结构方法传递给fasthttp。
type MyHandler struct {
foobar string
}
// request handler in net/http style, i.e. method bound to MyHandler struct.
func (h *MyHandler) HandleFastHTTP(ctx *fasthttp.RequestCtx) {
// notice that we may access MyHandler properties here - see h.foobar.
fmt.Fprintf(ctx, "Hello, world! Requested path is %q. Foobar is %q",
ctx.Path(), h.foobar)
}
// request handler in fasthttp style, i.e. just plain function.
func fastHTTPHandler(ctx *fasthttp.RequestCtx) {
fmt.Fprintf(ctx, "Hi there! RequestURI is %q", ctx.RequestURI())
}
// pass bound struct method to fasthttp
myHandler := &MyHandler{
foobar: "foobar",
}
fasthttp.ListenAndServe(":8080", myHandler.HandleFastHTTP)
// pass plain function to fasthttp
fasthttp.ListenAndServe(":8081", fastHTTPHandler)- The RequestHandler accepts only one argument - RequestCtx. It contains all the functionality required for http request processing and response writing. Below is an example of a simple request handler conversion from net/http to fasthttp.
RequestHandler只接受一个参数 - RequestCtx。它包含了http请求处理和响应编写所需的所有功能。下面是一个从net/http到fasthttp的简单请求处理程序转换的例子。
// net/http request handler
requestHandler := func(w http.ResponseWriter, r *http.Request) {
switch r.URL.Path {
case "/foo":
fooHandler(w, r)
case "/bar":
barHandler(w, r)
default:
http.Error(w, "Unsupported path", http.StatusNotFound)
}
}// the corresponding fasthttp request handler
requestHandler := func(ctx *fasthttp.RequestCtx) {
switch string(ctx.Path()) {
case "/foo":
fooHandler(ctx)
case "/bar":
barHandler(ctx)
default:
ctx.Error("Unsupported path", fasthttp.StatusNotFound)
}
}- Fasthttp allows setting response headers and writing response body in an arbitrary order. There is no 'headers first, then body' restriction like in net/http. The following code is valid for fasthttp:
Fasthttp允许以任意的顺序设置响应头和编写响应体。没有像net/http那样的 "先有头，后有身 "的限制。下面的代码对fasthttp有效。
requestHandler := func(ctx *fasthttp.RequestCtx) {
// set some headers and status code first
ctx.SetContentType("foo/bar")
ctx.SetStatusCode(fasthttp.StatusOK)
// then write the first part of body
fmt.Fprintf(ctx, "this is the first part of body\n")
// then set more headers
ctx.Response.Header.Set("Foo-Bar", "baz")
// then write more body
fmt.Fprintf(ctx, "this is the second part of body\n")
// then override already written body
ctx.SetBody([]byte("this is completely new body contents"))
// then update status code
ctx.SetStatusCode(fasthttp.StatusNotFound)
// basically, anything may be updated many times before
// returning from RequestHandler.
//
// Unlike net/http fasthttp doesn't put response to the wire until
// returning from RequestHandler.
}- Fasthttp doesn't provide ServeMux, but there are more powerful third-party routers and web frameworks with fasthttp support:
Fasthttp不提供ServeMux，但有更强大的第三方路由器和Web框架支持Fasthttp。
Net/http code with simple ServeMux is trivially converted to fasthttp code:
// net/http code
m := &http.ServeMux{}
m.HandleFunc("/foo", fooHandlerFunc)
m.HandleFunc("/bar", barHandlerFunc)
m.Handle("/baz", bazHandler)
http.ListenAndServe(":80", m)// the corresponding fasthttp code
m := func(ctx *fasthttp.RequestCtx) {
switch string(ctx.Path()) {
case "/foo":
fooHandlerFunc(ctx)
case "/bar":
barHandlerFunc(ctx)
case "/baz":
bazHandler.HandlerFunc(ctx)
default:
ctx.Error("not found", fasthttp.StatusNotFound)
}
}
fasthttp.ListenAndServe(":80", m)-
net/http -> fasthttp conversion table:
- All the pseudocode below assumes w, r and ctx have these types:
var ( w http.ResponseWriter r *http.Request ctx *fasthttp.RequestCtx )
- r.Body -> ctx.PostBody()
- r.URL.Path -> ctx.Path()
- r.URL -> ctx.URI()
- r.Method -> ctx.Method()
- r.Header -> ctx.Request.Header
- r.Header.Get() -> ctx.Request.Header.Peek()
- r.Host -> ctx.Host()
- r.Form -> ctx.QueryArgs() + ctx.PostArgs()
- r.PostForm -> ctx.PostArgs()
- r.FormValue() -> ctx.FormValue()
- r.FormFile() -> ctx.FormFile()
- r.MultipartForm -> ctx.MultipartForm()
- r.RemoteAddr -> ctx.RemoteAddr()
- r.RequestURI -> ctx.RequestURI()
- r.TLS -> ctx.IsTLS()
- r.Cookie() -> ctx.Request.Header.Cookie()
- r.Referer() -> ctx.Referer()
- r.UserAgent() -> ctx.UserAgent()
- w.Header() -> ctx.Response.Header
- w.Header().Set() -> ctx.Response.Header.Set()
- w.Header().Set("Content-Type") -> ctx.SetContentType()
- w.Header().Set("Set-Cookie") -> ctx.Response.Header.SetCookie()
- w.Write() -> ctx.Write(), ctx.SetBody(), ctx.SetBodyStream(), ctx.SetBodyStreamWriter()
- w.WriteHeader() -> ctx.SetStatusCode()
- w.(http.Hijacker).Hijack() -> ctx.Hijack()
- http.Error() -> ctx.Error()
- http.FileServer() -> fasthttp.FSHandler(), fasthttp.FS
- http.ServeFile() -> fasthttp.ServeFile()
- http.Redirect() -> ctx.Redirect()
- http.NotFound() -> ctx.NotFound()
- http.StripPrefix() -> fasthttp.PathRewriteFunc
-
VERY IMPORTANT! Fasthttp disallows holding references to RequestCtx or to its' members after returning from RequestHandler. Otherwise data races are inevitable. Carefully inspect all the net/http request handlers converted to fasthttp whether they retain references to RequestCtx or to its' members after returning. RequestCtx provides the following band aids for this case:
非常重要! Fasthttp不允许在从RequestHandler返回后保留对RequestCtx或其成员的引用。否则，数据竞赛是不可避免的。仔细检查所有转换到Fasthttp的net/http请求处理程序，它们是否在返回后保留对RequestCtx或其成员的引用。RequestCtx为这种情况提供了以下的创可贴。
- Wrap RequestHandler into TimeoutHandler.
- Call TimeoutError before returning from RequestHandler if there are references to RequestCtx or to its' members. See the example for more details.
Use this brilliant tool - race detector - for detecting and eliminating data races in your program. If you detected data race related to fasthttp in your program, then there is high probability you forgot calling TimeoutError before returning from RequestHandler.
-
Blind switching from net/http to fasthttp won't give you performance boost. While fasthttp is optimized for speed, its' performance may be easily saturated by slow RequestHandler. So profile and optimize your code after switching to fasthttp. For instance, use quicktemplate instead of html/template.
-
See also fasthttputil, fasthttpadaptor and expvarhandler.
- Use reuseport listener.
- Run a separate server instance per CPU core with GOMAXPROCS=1.
- Pin each server instance to a separate CPU core using taskset.
- Ensure the interrupts of multiqueue network card are evenly distributed between CPU cores. See this article for details.
- Use the latest version of Go as each version contains performance improvements.
- Do not allocate objects and
[]bytebuffers - just reuse them as much as possible. Fasthttp API design encourages this. - sync.Pool is your best friend.
- Profile your program
in production.
go tool pprof --alloc_objects your-program mem.pprofusually gives better insights for optimization opportunities thango tool pprof your-program cpu.pprof. - Write tests and benchmarks for hot paths.
- Avoid conversion between
[]byteandstring, since this may result in memory allocation+copy. Fasthttp API provides functions for both[]byteandstring- use these functions instead of converting manually between[]byteandstring. There are some exceptions - see this wiki page for more details. - Verify your tests and production code under race detector on a regular basis.
- Prefer quicktemplate instead of html/template in your webserver.
The following tricks are used by fasthttp. Use them in your code too.
- Standard Go functions accept nil buffers
var (
// both buffers are uninitialized
dst []byte
src []byte
)
dst = append(dst, src...) // is legal if dst is nil and/or src is nil
copy(dst, src) // is legal if dst is nil and/or src is nil
(string(src) == "") // is true if src is nil
(len(src) == 0) // is true if src is nil
src = src[:0] // works like a charm with nil src
// this for loop doesn't panic if src is nil
for i, ch := range src {
doSomething(i, ch)
}So throw away nil checks for []byte buffers from you code. For example,
srcLen := 0
if src != nil {
srcLen = len(src)
}becomes
srcLen := len(src)- String may be appended to
[]bytebuffer withappend
dst = append(dst, "foobar"...)[]bytebuffer may be extended to its' capacity.
buf := make([]byte, 100)
a := buf[:10] // len(a) == 10, cap(a) == 100.
b := a[:100] // is valid, since cap(a) == 100.- All fasthttp functions accept nil
[]bytebuffer
statusCode, body, err := fasthttp.Get(nil, "http://google.com/")
uintBuf := fasthttp.AppendUint(nil, 1234)- String and
[]bytebuffers may converted without memory allocations
func b2s(b []byte) string {
return *(*string)(unsafe.Pointer(&b))
}
func s2b(s string) (b []byte) {
bh := (*reflect.SliceHeader)(unsafe.Pointer(&b))
sh := (*reflect.StringHeader)(unsafe.Pointer(&s))
bh.Data = sh.Data
bh.Cap = sh.Len
bh.Len = sh.Len
return b
}This is an unsafe way, the result string and []byte buffer share the same bytes.
Please make sure not to modify the bytes in the []byte buffer if the string still survives!
- fasthttp - various useful helpers for projects based on fasthttp.
- fasthttp-routing - fast and powerful routing package for fasthttp servers.
- http2 - HTTP/2 implementation for fasthttp.
- router - a high performance fasthttp request router that scales well.
- fastws - Bloatless WebSocket package made for fasthttp to handle Read/Write operations concurrently.
- gramework - a web framework made by one of fasthttp maintainers
- lu - a high performance go middleware web framework which is based on fasthttp.
- websocket - Gorilla-based websocket implementation for fasthttp.
- websocket - Event-based high-performance WebSocket library for zero-allocation websocket servers and clients.
- fasthttpsession - a fast and powerful session package for fasthttp servers.
- atreugo - High performance and extensible micro web framework with zero memory allocations in hot paths.
- kratgo - Simple, lightweight and ultra-fast HTTP Cache to speed up your websites.
- kit-plugins - go-kit transport implementation for fasthttp.
- Fiber - An Expressjs inspired web framework running on Fasthttp
- Gearbox - ⚙️ gearbox is a web framework written in Go with a focus on high performance and memory optimization
-
Why creating yet another http package instead of optimizing net/http?
Because net/http API limits many optimization opportunities. For example:
- net/http Request object lifetime isn't limited by request handler execution time. So the server must create a new request object per each request instead of reusing existing objects like fasthttp does.
- net/http headers are stored in a
map[string][]string. So the server must parse all the headers, convert them from[]bytetostringand put them into the map before calling user-provided request handler. This all requires unnecessary memory allocations avoided by fasthttp. - net/http client API requires creating a new response object per each request.
-
Why fasthttp API is incompatible with net/http?
Because net/http API limits many optimization opportunities. See the answer above for more details. Also certain net/http API parts are suboptimal for use:
-
Why fasthttp doesn't support HTTP/2.0 and WebSockets?
HTTP/2.0 support is in progress. WebSockets has been done already. Third parties also may use RequestCtx.Hijack for implementing these goodies.
-
Are there known net/http advantages comparing to fasthttp?
Yes:
- net/http supports HTTP/2.0 starting from go1.6.
- net/http API is stable, while fasthttp API constantly evolves.
- net/http handles more HTTP corner cases.
- net/http can stream both request and response bodies
- net/http can handle bigger bodies as it doesn't read the whole body into memory
- net/http should contain less bugs, since it is used and tested by much wider audience.
-
Why fasthttp API prefers returning
[]byteinstead ofstring?Because
[]bytetostringconversion isn't free - it requires memory allocation and copy. Feel free wrapping returned[]byteresult intostring()if you prefer working with strings instead of byte slices. But be aware that this has non-zero overhead. -
Which GO versions are supported by fasthttp?
Go 1.15.x. Older versions won't be supported.
-
Please provide real benchmark data and server information
See this issue.
-
Are there plans to add request routing to fasthttp?
There are no plans to add request routing into fasthttp. Use third-party routers and web frameworks with fasthttp support:
See also this issue for more info.
-
I detected data race in fasthttp!
Cool! File a bug. But before doing this check the following in your code:
- Make sure there are no references to RequestCtx or to its' members after returning from RequestHandler.
- Make sure you call TimeoutError before returning from RequestHandler if there are references to RequestCtx or to its' members, which may be accessed by other goroutines.
-
I didn't find an answer for my question here
Try exploring these questions.