NB: This is not written by me. The original site used to be hosted here: http://www.solinno.co.uk/public/kwuartboot/ ------------------------------------------------------------------------------- To build, type "make". Let's say your JTAG/UART is on /dev/ttyUSB0, and you have a u-boot.kwb you want to test. 1. Power off the Kirkwood SoC 2. Make sure any terminal emulator is disconnected 3. Run the program as follows $ ./kwuartboot /dev/ttyUSB0 uboot.kwb 4. Power on the Kirkwood SoC 5. Start the terminal emulator - u-boot should be running.