/cse421-lab-project-bracu

Primary LanguageHTML

CSE421 Project BRACU

It is a university project of computer network course.

Group Members:

Joyanta J. Mondal Anirban Mitra Priya Saha

What have we done:

Router Config:

  • We have configured the routers and DHCP Server according to the user limit given in the question. (In Router Config Command)
  • We have connected the routers with each other
  • We have configured the routers to connect with server
  • We have configured the PC ip-config accordingly
  • Created the Index.html for the web server and setup the web server. (Initially it worked but after some time, pinging was successful but it wasn't showing in web browser)

IP Route Completed to:

  • Ralph Bohner to Library (and vice versa)
  • Ralph Bohner to M & B (and vice versa)
  • Ralph Bohner to Proctor Residence (and vice versa)
  • M & B to Proctor Residence (and vice versa)
  • M & B to Library (and vice versa)
  • Proctor Residence to Library (and vice versa)

We didn't do the rest as we have shown some of the ip routes getting successfull.

How we setup the router physically:

PC to Switch - Copper StraightThrough - Fast Ethernet (Yellow) to Fast Ethernet (Yellow) Port

Switch to Router - Copper StraightThrough - Fast Ethernet (Yellow) to Fast Ethernet (Yellow) Port

Router to Router - Serial DCE (with watch logo) - will be Connected through Serial Port. - need to take serial port inside the router

PC to Router (to config) - blue wire - RS232 to Console

Server to Switch - Copper StraightThrough - Fast Ethernet (Yellow) to Fast Ethernet (Yellow) Port

NVRam stores all the data permanently.

Switch - CFE 4pcs and FFE 2pcs

Router - FFE 2pcs, 1S 2pcs, CFE 2pcs

This project consists of:

  • PKT File
  • Question
  • Network topology diagram with proper labels
  • The configuration commands of all the routers that you have implemented.
  • VLSM tree
  • IP address table