lewisxhe/AXP202X_Library

Issues

• Arduino Library Registry

  #45 opened 2 years ago by r41d
  2

• [Temp Readings] AXP 192 on TBeam ESP32 Lora32 (T22_V1.1 20191212)

  #36 opened 3 years ago by carlkidcrypto
  7

• Battery Cutoff voltage?

  #34 opened 3 years ago by Bwooce
  22

• [Question] Chip ID and AXP202 I2C Addr

  #38 opened 3 years ago by maizezoidberg
  1

• possible memory issue

  #41 opened 3 years ago by teaalltr
  1

• Bus Invalid State on axp.begin(Wire, AXP192_SLAVE_ADDRESS)

  #42 opened 3 years ago by floki-92
  2

• Compile error when using ESP-IDF

  #40 opened 3 years ago by mr-goldhands
  0

• Please make new release to catch up commits

  #37 opened 4 years ago by cyberman54
  1

• AXP20X_Class::isVbusRemoveIRQ() triggers only when PWRON pressed

  #35 opened 4 years ago by Cheddaru
  2

• Target-voltage below 4V possible?

  #32 opened 4 years ago by dl5dla
  1

• getBattChargeCurrent() not working ?

  #31 opened 4 years ago by patrickpollet1966
  2

• Basic schematic of this chip

  #30 opened 4 years ago by Gruniek
  1

• setChargeControlCur() and getBattPercentage() not working?

  #27 opened 4 years ago by jangrewe
  3

• enableChargeing() not working

  #26 opened 4 years ago by jangrewe
  1

• AXP192 in TTGO T-Beam 1.0 setPowerOutPut function for DCDC3

  #25 opened 4 years ago by Makhaos
  5

• Schematic

  #3 opened 4 years ago by clow57
  3

• access is outside of array limits

  #21 opened 4 years ago by peterus
  0

• AXP192 on T-Beam V1.0 charge current control settings seems not work

  #18 opened 4 years ago by fafu
  4

• Use of setChargeControlCur() disables charging

  #16 opened 5 years ago by DooMMasteR
  2

• AXP202 GPIO1 'HIGH' voltage value

  #15 opened 5 years ago by lyusupov
  7

• Please create release in github

  #12 opened 5 years ago by cyberman54
  3

• Use function pointers for read/write to i2c bus

  #5 opened 5 years ago by cyberman54
  2

• DCDC1 (AXP192) / EXTEN (AXP202) cannot be switched off

  #8 opened 5 years ago by cyberman54
  1

• isVBUSPlug() always returns a wrong value

  #9 opened 5 years ago by cyberman54
  1

• getVbusCurrent() and getVbusVoltage() not working

  #7 opened 5 years ago by cyberman54
  2

• Publish library on platformio

  #4 opened 5 years ago by cyberman54
  3