/GLCIC-PyTorch

A High-Quality PyTorch Implementation of "Globally and Locally Consistent Image Completion".

Primary LanguagePythonMIT LicenseMIT

GLCIC-PyTorch

This repository provides a pytorch-based implementation of GLCIC introduced by Iizuka et. al.

glcic
result_1 result_2 result_3

Requirements

Our scripts were tested in the following environment.

  • Python: 3.7.6
  • torch: 1.6.0 (cuda 10.1)
  • torchvision: 0.7.0
  • tqdm: 4.50.2
  • Pillow: 8.0.0
  • opencv-python: 4.4.0.44
  • numpy: 1.19.2
  • GPU: Geforce GTX 1080Ti (12GB RAM) X 4

You can install all the requirements by executing below.

# in <path-to-this-repo>/
pip install -r requirements.txt

DEMO (Inference)

1. Download pretrained generator model and training config file.

Both the generator and discriminator were trained on the CelebA dataset. Note that you don't need to have dicriminator when performing image completion (discriminator is needed only during training).

2. Inference

# in <path-to-this-repo>/
python predict.py model_cn config.json images/test_2.jpg test_2_out.jpg

Left: raw input image
Center: masked input image
Right: inpainted output image

DEMO (Training)

This section introduces how to train a glcic model using CelebA dataset.

1. Download the dataset

Download the dataset from this official link.

Then, execute the following commands.

# unzip dataset
unzip img_align_celeba.zip
# move dataset
mv img_align_celeba/ <path-to-this-repo>/datasets/
# move into datasets/ directory
cd <path-to-this-repo>/datasets/
# make dataset
python make_dataset.py img_align_celeba/

The last command splits the dataset into training dataset (80%) and test dataset (20%) randomly.

2. Training

Run the following command.

# in <path-to-this-repo>
python train.py datasets/img_align_celeba results/demo/

Training results (model snapshots & test inpainted outputs) are to be saved in results/demo/.

The training procedure consists of the following three phases.

  • Phase 1: trains only generator.
  • Phase 2: trains only discriminator, while generator is frozen.
  • Phase 3: both generator and discriminator are jointly trained.

Default settings of train.py are based on the original paper except for batch size. If you need to reproduce the paper result, add --data_parallel --bsize 96 when executing training.

How to train with custom dataset ?

1. Prepare dataset

You have to prepare a dataset in the following format.

dataset/ # any name is OK
    |____train/ # used for training
    |       |____XXXX.jpg # .png format is also acceptable.
    |       |____OOOO.jpg
    |       |____....
    |____test/  # used for test
            |____oooo.jpg
            |____xxxx.jpg  
            |____....

Both dataset/train and dataset/test are required.

2. Training

# in <path-to-this-repo>/
# move dataset
mv dataset/ datasets/
# execute training
python train.py datasets/dataset/ results/result/ [--data_parallel (store true)] [--cn_input_size (int)] [--ld_input_size (int)] [--init_model_cn (str)] [--init_model_cd (str)] [--steps_1 (int)] [--steps_2 (int)] [--steps_3 (int)] [--snaperiod_1 (int)] [--snaperiod_2 (int)] [--snaperiod_3 (int)] [--bsize (int)] [--bdivs (int)]

Arguments

  • <dataset> (required): path to the dataset directory.
  • <result> (required): path to the result directory.
  • [--data_parallel (store true)]: when this flag is enabled, models are trained in data-parallel way. If N gpus are available, N gpus are used during training (default: disabled).
  • [--cn_input_size (int)]: input size of generator (completion network). All input images are rescalled so that the minimum side is equal to cn_input_size then randomly cropped into cn_input_size x cn_input_size (default: 160).
  • [--ld_input_size (int)]: input size of local discriminator (default: 96). Input size of global discriminator is the same as [--cn_input_size].
  • [--init_model_cn (str)]: path to a pretrained generator, used as its initial weights (default: None).
  • [--init_model_cd (str)]: path to a pretrained discriminator, used as its initial weights (default: None).
  • [--steps_1 (int)]: training steps during phase 1 (default: 90,000).
  • [--steps_2 (int)]: training steps during phase 2 (default: 10,000).
  • [--steps_3 (int)]: training steps during phase 3 (default: 400,000).
  • [--snaperiod_1 (int)]: snapshot period during phase 1 (default: 10,000).
  • [--snaperiod_2 (int)]: snapshot period during phase 2 (default: 2,000).
  • [--snaperiod_3 (int)]: snapshot period during phase 3 (default: 10,000).
  • [--max_holes (int)]: maximum number of holes randomly generated and applied to each input image (default: 1).
  • [--hole_min_w (int)]: minimum width of a hole (default: 48).
  • [--hole_max_w (int)]: maximum width of a hole (default: 96).
  • [--hole_min_h (int)]: minimum height of a hole (default: 48).
  • [--hole_max_h (int)]: maximum height of a hole (default: 96).
  • [--bsize (int)]: batch size (default: 16). bsize >= 96 is strongly recommended.
  • [--bdivs (int)]: divide a single training step of batch size = bsize into bdivs steps of batch size = bsize/bdivs, which produces the same training results as when bdivs = 1 but uses smaller gpu memory space at the cost of speed. This option can be used together with data_parallel (default: 1).

Example: If you train a model with batch size 24 with data_parallel option and leave the other settings as default, run the following command.

# in <path-to-this-repo>/
python train.py datasets/dataset results/result --data_parallel --bsize 24

How to perform infenrece with custom dataset ?

Assume you've finished training and result directory is <path-to-this-repo>/results/result.

# in <path-to-this-repo>/
python predict.py results/result/phase_3/model_cn_step<step-number> results/result/config.json <input_img> <output_img> [--max_holes (int)] [--img_size (int)] [--hole_min_w (int)] [--hole_max_w (int)] [--hole_min_h (int)] [--hole_max_h (int)]

Arguments

  • <input_img> (required): path to an input image.
  • <output_img> (required): path to an output image.
  • [--img_size (int)]: input size of generator. Input images are rescalled so that the minimum side = img_size then randomly cropped into img_size x img_size (default: 160).
  • [--max_holes (int)]: maximum number of holes to be randomly generated (default: 5).
  • [--hole_min_w (int)]: minimum width of a hole (default: 24).
  • [--hole_max_w (int)]: maximum width of a hole (default: 48).
  • [--hole_min_h (int)]: minimum height of a hole (default: 24).
  • [--hole_max_h (int)]: maximum height of a hole (default: 48).

Example: If you make an inference with an input image <path-to-this-repo>/input.jpg and save output image as <path-to-this-repo>/output.jpg, run the following command.

# in <path-to-this-repo>/
python predict.py results/result/phase_3/model_cn_step{step_number} results/result/config.json input.jpg output.jpg