liaozhelin/yds-charger

问下电压电流异常充电站会这么显示，发出什么样的报警？

Closed this issue · 4 comments

Inevitableofcold commented
问下电压电流异常充电站会这么显示，发出什么样的报警？
Inevitableofcold commented

问下电压电流异常充电站会怎么显示，发出什么样的报警？

ktx888 commented

设置->系统监控->异常代码

ktx888 commented

uint8_t event = u8x8_GetMenuEvent(u8g2_GetU8x8(&u8g2));
u8g2_ClearBuffer(&u8g2);
u8g2_DrawUTF8(&u8g2, 0, 15, "C1异常代码");
u8g2_DrawUTF8(&u8g2, 20, 31, "系统无故障");
if (sw35xx_c1.state.val_input_upmax)
u8g2_DrawUTF8(&u8g2, 20, 31, "输入电压过高！");
if (sw35xx_c1.state.tem_alarm_upmax)
u8g2_DrawUTF8(&u8g2, 20, 31, "芯片温度过高！");
if (sw35xx_c1.state.tem_shutdown)
u8g2_DrawUTF8(&u8g2, 20, 31, "高温关机保护！");
if (sw35xx_c1.state.short_citcuit)
u8g2_DrawUTF8(&u8g2, 20, 31, "输出短路！"); // 0x05版本的芯片貌似不能用
u8g2_DrawUTF8(&u8g2, 0, 47, "C2异常代码");
u8g2_DrawUTF8(&u8g2, 20, 63, "系统无故障");
if (sw35xx_c2.state.val_input_upmax)
u8g2_DrawUTF8(&u8g2, 20, 63, "输入电压过高！");
if (sw35xx_c2.state.tem_alarm_upmax)
u8g2_DrawUTF8(&u8g2, 20, 63, "芯片温度过高！");
if (sw35xx_c2.state.tem_shutdown)
u8g2_DrawUTF8(&u8g2, 20, 63, "高温关机保护！");
if (sw35xx_c2.state.short_citcuit)
u8g2_DrawUTF8(&u8g2, 20, 63, "输出短路！"); // 0x05版本的芯片貌似不能用

Inevitableofcold commented