/lakka-gpio-control

Lakka 2.1 + NESPi CASE + Shutdown buttons

Primary LanguageShell

lakka-gpio-control

Adding the ability of soft shutdown on Raspberry Pi 3/4

How to install

  1. Make sure the raspberry pi is connected to the internet.

  2. Make sure SSH is enabled in Lakka (Config / Services / SSH Enable is ON).

  3. ssh into lakka:

    ssh root@YOUR_LAKKA_IP_ADDRESS
password: root (if unchanged)

  4. In the terminal, type the one-line command below(Case sensitive):

    wget -O - "https://github.com/lilarcor/lakka-gpio-control/raw/master/install.sh" | bash

  5. Your Raspberry Pi will reboot and you're done!