Node-Red Flow in combination with Home Assistant, NibePi Nibe Cop calculation.
Calculation is based on link
This tutorial assumes the following:
- A working nibepi connected to your heat pump and reachable on your local network (MQTT HA Dicovery activated)
- A working mqtt server/broker. Either in Home Assistant as add-on (instructions link) or stand alone.
- A working Home Assistant system
- Node-Red running as an add-on in Home Assistant.
- In Node-red add node-red-contrib-home-assistant-websocket To get data from HA.
- In Node-Red add node-red-contrib-ha-mqtt To push the data back to Home Assistant.
- In NibePi activate these in "Datahantering":
- EB100-EP14-BT3(40012) = BT3
- EB100-EP14-BT10(40015) = BT10 (replace with outdoortemperature if you have heatpump with external unit BT28 or BT1)
- EB100-EP14-BT12(40017) = BT12 (replace with BT2 if you have heatpump with external unit)
- EB100-EP14-BT14(40018) = BT14
- EB100-EP14-BT17(40022) = BT17
- Compressor frequency, Actual (43136)
- EB100-EP14 PCA Base Relays (43514)
