Barbervisor

Intel x86 bare metal hypervisor for researching snapshot fuzzing ideas.

The blog describing the development can be found here

Building

Ensure i586-pc-windows-msvc and x86_64-pc-windows-msvc toolchains are installed and running nightly Rust.

> rustup target add i586-pc-windows-msvc
> rustup target add x86_64-pc-windows-msvc 

> rustup toolchain list
nightly-x86_64-pc-windows-msvc (default)

Download LLVM and have lld-link in the path. Download NASM and have nasm in the path.

Change the IP address in tftp-server/src/main to bind to the wanted network address.

> cargo run

Snapshots

Snapshots are currently gathered from VirtualBox.

After snapshotting from VirtualBox, place the result of writecore at snapshot/snapshot.dmp and the result of .pgmphystofile at snapshot/snapshot.phys. These paths are hard coded and are required for most of the utilities.

Deploying

Copy barberslice.boot and barberslice.kern to a TFTPD server folder configured for PXE booting. Also set the PXE boot filename to barberslice.boot in your DHCP server.

Bochs

The kernel can be tested in Bochs before testing on bare metal.

bochs -q -f emu/bochsrc

Be sure to change the following lines of the bochsrc to point to your local Bochs install:

romimage: file="C:\Users\user\git\bochs\bios\BIOS-bochs-latest", address=0x0, options=none
vgaromimage: file="C:\Users\user\git\bochs\bios\VGABIOS-lgpl-latest"
ata0-master: type=cdrom, path="C:\Users\user\git\barberslice\ipxe\src\bin\ipxe.iso", status=inserted
e1000: enabled=1, mac=52:54:00:12:34:56, ethmod=vnet, ethdev="C:\Users\user\git\barberslice\emu"

iPXE

iPXE build is included if wanted to test in Bochs using PXE.

On linux:

sudo apt-get install liblzma liblzma-dev isolinux mkisofs
git clone https://github.com/ipxe/ipxe
cd ipxe/src
make bin/ipxe.iso EMBED=../../emu/boot.ipxe

Utilities

check_address: Return the module+offset and instruction for a given address from the current snapshot
corpgen: Generates serialized corpus for shipping to the kernel
coverage: Dump module+offset coverage file to load into lighthouse
diverage: Legacy utility used to diff a windbg single step trace and a trace dumped from Barberslice
find_input: Return all generated files that hit a given address
parse_trace: Parses the trace format sent from the hypervisor into a human readable form
pci-ids-parser: Parser for dumping PCI information that was going to be added to the kernel (but never was)
snapshot: Parses the VirtualBox core dump file and dumps the register state for the kernel to use.
tftp-server: Custom TFTP server for communicating with the hypervisor

Docs

The main kernel docs can be found:

cd kernel
cargo doc --open

The utilities also have READMEs giving a high level overview of what the tool is used for.

linhlhq/Barbervisor