Pinned Repositories
Adafruit-GFX-Library
Adafruit GFX graphics core library, this is the 'core' class that all our other graphics libraries derive from
Adafruit-ST7735-Library
This is a library for the Adafruit 1.8" SPI display http://www.adafruit.com/products/358 and http://www.adafruit.com/products/618
Adafruit_ILI9341
Library for Adafruit ILI9341 displays
Adafruit_SSD1306
SSD1306 oled driver library for 'monochrome' 128x64 and 128x32 OLEDs!
ESP-Downloader
ESP-Downloader datasheet
PI-2230-SSD
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library optimised for the Raspberry Pi Pico (RP2040), STM32, ESP8266 and ESP32 that supports different driver chips
UPS-18650
a UPS for raspberry pi 1/2/3
UPS-18650-Lite
UPS-18650-Lite
UPS-Lite
linshuqin329's Repositories
linshuqin329/UPS-Lite
linshuqin329/UPS-18650
a UPS for raspberry pi 1/2/3
linshuqin329/UPS-18650-Lite
UPS-18650-Lite
linshuqin329/Adafruit-GFX-Library
Adafruit GFX graphics core library, this is the 'core' class that all our other graphics libraries derive from
linshuqin329/Adafruit-ST7735-Library
This is a library for the Adafruit 1.8" SPI display http://www.adafruit.com/products/358 and http://www.adafruit.com/products/618
linshuqin329/PI-2230-SSD
linshuqin329/RELAYS_4_HAT
linshuqin329/TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library optimised for the Raspberry Pi Pico (RP2040), STM32, ESP8266 and ESP32 that supports different driver chips
linshuqin329/arduino-pico
Raspberry Pi Pico Arduino core, for all RP2040 boards
linshuqin329/DAPLink
linshuqin329/E-Cbue
linshuqin329/E-Cube
linshuqin329/esp32-camera-screen
TTGO T-camera Plus
linshuqin329/ESP32-HUB75-MatrixPanel-DMA
An Adafruit GFX Compatible Library for the ESP32, ESP32-S2, ESP32-S3 to drive HUB75 LED matrix panels using DMA for high refresh rates. Supports panel chaining.
linshuqin329/FastLED
The FastLED library for colored LED animation on Arduino. Please direct questions/requests for help to the FastLED Reddit community: http://fastled.io/r We'd like to use github "issues" just for tracking library bugs / enhancements.
linshuqin329/kendryte-ide
linshuqin329/M5-Schematic
Most of the schematics of M5Stack boards
linshuqin329/M5Stick2Projects
linshuqin329/M5StickC
M5Stack Arduino Library
linshuqin329/PDLS_EXT3_Basic
Library for Pervasive Displays iTC BW and BWR screens with EXT3 extension kit
linshuqin329/PI_FAN
linshuqin329/pinetime-hypnos
Zephyr firmware for the nRF52832 PineTime smartwatch
linshuqin329/SAMD21_M0
SAMD21_M0 A Development Board Programmed with Arduino
linshuqin329/Tiny-C3
linshuqin329/TTGO-T-Display
linshuqin329/u8g2
U8glib library for monochrome displays, version 2
linshuqin329/upsplus
UPS Plus is a new generation of UPS power management module. It is an improved version of the original UPS prototype. It has been fixed the bug that UPS could not charge and automatically power off during work time. It can not only perform good battery power management, but also provide stable voltage output and RTC functions. At the same time,it support for FCP, AFC, SFCP fast charge protocol, support BC1.2 charging protocol, support battery terminal current/voltage monitoring and support two-way monitoring of charge and discharge. It can provide programmable PVD function. Power Voltage Detector (PVD) can be used to detect if batteries voltage is below or above configured voltage. Once this function has been enabled, it will monitoring your batteries voltage, and you can control whether or not shut down Raspberry Pi via simple bash script or python script. This function will protect your batteries from damage caused by excessive discharge. It can provide Adjustable data sampling Rate. This function allows you to adjust the data sampling rate so that you can get more detailed battery information and also it will consume some power. The data sampling information can communicate with the upper computer device through the I2C protocol. UPS Plus supports the OTA firmware upgrade function. Once there is a new firmware update, it is very convenient for you to upgrade firmware for UPS Plus. The firmware upgrade can be completed only by connecting to the Internet,and execute a python script. Support battery temperature monitoring and power-down memory function. UPS Plus can be set to automatically start the Raspberry Pi after the external power comes on. The programmable shutdown and forced restart function will provide you with a remote power-off restart management method. That means you don’t need to go Unplug the power cable or press the power button to cut off the power again. You can set the program to disconnect the power supply after a few seconds after the Raspberry Pi is shut down properly. And you can also reconnect the power supply after a forced power failure to achieve a remote power-off and restart operation. Once it was setting up, you don't need to press power button to boot up your device which is very suitable for smart home application scenarios.
linshuqin329/WS2812FX
WS2812 FX Library for Arduino and ESP8266
linshuqin329/XC-OS
Open source graphics operating system for microcontroller
linshuqin329/ZERO_PLUS