Language Server Protocol Support for Emacs

Language Server Protocol Support for Emacs

Why?

❤️ Community Driven
💎 Fully featured - supports LSP core and Language Server non-standard extensions
🚀 Easy to configure - works out of the box and automatically upgrades if additional packages are present
🌟 Flexible - could be configured as full-blown IDE with flashy UI or minimal distraction free

Overview

Client for Language Server Protocol (v3.14). lsp-mode aims to provide IDE-like experience by providing optional integration with the most popular Emacs packages like company, flycheck and projectile.

Non-blocking asynchronous calls
Real-time Diagnostics/linting (via builtin flymake when Emacs > 26 or flycheck/lsp-ui)
Code completion - using company-lsp or builtin completion-at-point
Hovers - using lsp-ui
Code actions - using lsp-execute-code-action or lsp-ui
Code outline - using builtin imenu or helm-imenu
Code navigation - using builtin xref
Code lens (references/implementations) - using builtin xref
Highlights
Formatting
Debugger - dap-mode
Helm integration - helm-lsp
Treemacs integration - lsp-treemacs

Installation

Install via melpa

The recommended way to install lsp-mode is via package.el - the built-in package manager in Emacs. lsp-mode is available on the two major package.el community maintained repos - MELPA Stable and MELPA.

M-x package-install [RET] lsp-mode [RET]

Configuration

Install language server

Check the table bellow with the list of supported servers and the corresponding instructions on how to install the server.

Configure lsp-mode

Vanilla Emacs

You could go minimal and use lsp-mode as it is without external packages with the built-in flymake and completion-at-point or you could install the following extensions for better experience:

install lsp-ui for flycheck integration and higher level UI modules.
install company-lsp if you want to use company-mode for completion.
install lsp-treemacs for project wide error overview.
install helm-lsp provides on type completion for xref-apropos.
install dap-mode if your language is supported by the debugger.

(require 'lsp-mode)
(add-hook 'XXX-mode-hook #'lsp)

where XXX could be major mode like python, java, c++. Alternatively, if you want to minimize you configuration you may use prog-mode-hook. In case you do that, lsp will try to start for each programming mode and echo a message when there is no client registered for the current mode or if the corresponding server is not present. In addition, lsp-mode will automatically detect and configure lsp-ui and company-lsp. To turn off that behavior you could set lsp-auto-configure to nil.

To defer LSP server startup (and DidOpen notifications) until the buffer is visible you can use lsp-deferred instead of lsp:

(add-hook 'XXX-mode-hook #'lsp-deferred)

Spacemacs

lsp-mode is included in spacemacs develop branch. Add lsp to dotspacemacs-configuration-layers and configure the language that you want to use to be backed by lsp backend.

use-package

Replace (require 'lsp-mode) with the following if you use use-package.

(use-package lsp-mode
  :hook (XXX-mode . lsp)
  :commands lsp)

;; optionally
(use-package lsp-ui :commands lsp-ui-mode)
(use-package company-lsp :commands company-lsp)
(use-package helm-lsp :commands helm-lsp-workspace-symbol)
(use-package lsp-treemacs :commands lsp-treemacs-errors-list)
;; optionally if you want to use debugger
(use-package dap-mode)
;; (use-package dap-LANGUAGE) to load the dap adapter for your language

To defer LSP server startup (and DidOpen notifications) until the buffer is visible you can use lsp-deferred instead of lsp:

(use-package lsp-mode
  :hook (XXX-mode . lsp-deferred)
  :commands (lsp lsp-deferred))

How does it work?

lsp-mode has predefined list of server configurations (loaded in lsp-clients.el) containing a mapping from major-mode to the server configuration or by using activation function. In addition to the default server configuration located in lsp-clients.el there are few languages servers which require separate package(check Supported languages). When you open a file from a particular project lsp-mode and call lsp command lsp-mode will look for server registrations able to handle current file. If there is such client lsp-mode will look for the project root. If you open a file from the project for the first time you will be prompted to define the current project root. Once the project root is selected it is saved in lsp-session file and it will be loaded the next time you start Emacs so you no longer will be asked for a project root when you open a file from that project. Later if you want to change the project root you may use lsp-workspace-folder-remove to remove the project and call lsp-workspace-folder-add to add the root. If you want to force starting a particular language server in a file you may use C-u M-x lsp which will prompt you to select language server to start.

Supported languages

Some of the servers are directly supported by lsp-mode by requiring lsp-clients.el while others require installing additional packages which provide server specific functionality.

Language	Language Server	Built-in	Installation command	Debugger
Angular	vscode-ng-language-service	Yes	Installation instructions	Not relevant
Bash	bash-language-server	Yes	npm i -g bash-language-server
C++	ccls	emacs-ccls	ccls	Yes (gdb or lldb)
C++	clangd	Yes	clangd	Yes (gdb or lldb)
C++	cquery	emacs-cquery	cquery	Yes (gdb or lldb)
Clojure	clojure-lsp	Yes	clojure-lisp
CSS/LessCSS/SASS/SCSS	css	Yes	npm install -g vscode-css-languageserver-bin
Dart	dart_analysis_server	Yes	built into dart-sdk
Dockerfile	dockerfile-language-server-nodejs	Yes	npm install -g dockerfile-language-server-nodejs
Dart	dart_language_server	Yes	pub global activate dart_language_server
Elixir	elixir-ls	Yes	elixir-ls	Yes
Elm	elmLS	Yes	npm i -g @elm-tooling/elm-language-server, or clone the repository and follow installation instructions	No
Erlang	erlang_ls	Yes	erlang_ls
F#	fsautocomplete	Yes	Automatic by lsp-fsharp	No
Fortran	fortran-language-server	Yes	pip install fortran-language-server	Yes
Go	gopls	Yes	gopls go get -u golang.org/x/tools/cmd/gopls	Yes
Go	bingo	Yes	bingo	Yes
Groovy	groovy-language-server	Yes	groovy-language-server
Hack	hhvm	Yes	hhvm
HTML	html	Yes	npm install -g vscode-html-languageserver-bin
Haskell	IDE engine	lsp-haskell	IDE engine
Java	Eclipse JDT LS	lsp-java	Automatic by lsp-java	Yes
JavaScript/TypeScript	typescript-language-server (recommended)	Yes	npm i -g typescript-language-server; npm i -g typescript	Yes (Firefox/Chrome)
JavaScript/TypeScript	javascript-typescript-stdio	Yes	npm i -g javascript-typescript-langserver	Yes (Firefox/Chrome)
JavaScript Flow	flow (add-on if working on a Flow file)	Yes	flow	Yes (Firefox/Chrome)
Julia	lsp-julia	lsp-julia	LanguageServer.jl
Kotlin	kotlin-language-server	Yes	kotlin-language-server
Ocaml	ocaml-language-server	Yes	ocaml-language-server
PHP(recommended)	intelephense	Yes	npm i intelephense -g	Yes
PHP	php-language-server	Yes	php-language-server	Yes
Powershell	PowerShellEditorServices	lsp-powershell	Automatic by lsp-powershell
Python	pyls	Yes	pip install ‘python-language-server[all]’	Yes
Python(Microsoft)	Microsoft Python Language Server	lsp-python-ms	lsp-python-ms	Yes
Ruby	solargraph	Yes	gem install solargraph	Yes
Rust	rls	Yes	rls	Yes
Scala	Metals	Yes	Metals
Swift	sourcekit-LSP	lsp-sourcekit	sourcekit-LSP	Yes (via llvm debug adapter)
Vue	vue-language-server	Yes	npm install -g vue-language-server	Yes (Firefox/Chrome)
XML	lsp4xml	Yes	Download from lsp4xml releases

Commands

lsp-describe-session - Display session folders and running servers.
lsp-describe-thing-at-point - Display help for the thing at point.
lsp-execute-code-action - Execute code action
lsp-format-buffer - Format current buffer
lsp-organize-imports - Organize library imports
lsp-goto-implementation - Go to implementation
lsp-goto-type-definition - Go to type definition
lsp-rename - Rename symbol at point
lsp-restart-workspace - Restart project
lsp-symbol-highlight - Highlight all relevant references to the symbol under point.
lsp-workspace-folders-add - Add workspace folder
lsp-workspace-folders-remove - Remove workspace folder
lsp-workspace-folders-switch - Switch workspace folder
imenu or helm-imenu - display document structure.
completion-at-point - display completion using built-in emacs completion-at-point framework.
lsp-find-definition - to find the definition for the symbol under point.
lsp-find-references - Find references for the symbol under point.
lsp-disconnect - Disconnect the buffer from the language server.
lsp-lens-show - Show lenses in the current file
lsp-lens-hide - Hide lenses in the current file
lsp-lens-mode (experimental) - Turn on/off lenses in the current file.

Settings

lsp-log-io - If non-nil, print all messages to and from the language server to *lsp-log*.
lsp-print-performance - If non-nil, print performance info. to *lsp-log*.
lsp-inhibit-message - If non-nil, inhibit the message echo via inhibit-message.
lsp-report-if-no-buffer - If non nil the errors will be reported even when the file is not open.
lsp-keep-workspace-alive - If non nil keep workspace alive when the last workspace buffer is closed.
lsp-enable-snippet - Enable/disable snippet completion support.
lsp-auto-guess-root - Automatically guess the project root using projectile/project.
lsp-restart - Defines how server exited event must be handled.
lsp-session-file - File where session information is stored.
lsp-auto-configure - Auto configure lsp-mode. When set to t lsp-mode will auto-configure lsp-ui and company-lsp.
lsp-document-sync-method - How to sync the document with the language server.
lsp-auto-execute-action - Auto-execute single action.
lsp-eldoc-render-all - Display all of the info returned by document/onHover. If this is nil, eldoc will show only the symbol information.
lsp-signature-render-all - Display all of the info returned by textDocument/signatureHelp. If this is nil, eldoc will show only the active signature.
lsp-enable-completion-at-point - Enable completion-at-point integration.
lsp-enable-xref - Enable xref integration.
lsp-prefer-flymake - If you prefer flycheck and lsp-ui-flycheck is available, (setq lsp-prefer-flymake nil). If set to :none neither of two will be enabled.
lsp-enable-indentation - Indent regions using the file formatting functionality provided by the language server.
lsp-enable-on-type-formatting - Enable textDocument/onTypeFormatting integration.
lsp-before-save-edits - If non-nil, lsp-mode will apply edits suggested by the language server before saving a document.
lsp-imenu-show-container-name - Display the symbol’s container name in an imenu entry.
lsp-imenu-container-name-separator - Separator string to use to separate the container name from the symbol while displaying imenu entries.
lsp-imenu-sort-methods - How to sort the imenu items. The value is a list of kind, name or position. Priorities are determined by the index of the element.
lsp-response-timeout - Number of seconds to wait for a response from the language server before timing out.
lsp-enable-file-watchers - If non-nil lsp-mode will watch the files in the workspace if the server has requested that.

Screenshots

RUST Completion with company-lsp
Typescript references using lsp-ui
Debugging Python using dap-mode
Call hierarchy via ccls
Metals Doctor

Extensions

TRAMP

LSP mode has support for tramp buffers with the following requirements:

The language server has to be present on the remote server.
Having multi folder language server (like Eclipse JDT LS) cannot have local and remote workspace folders.

How does it work?

lsp-mode detects whether a particular file is located on remote machine and looks for a client which matches current file and it is marked as :remote? t. Then lsp-mode starts the client through tramp.

Sample configuration

Here it is example how you can configure python language server to work when using TRAMP. Note that if you are trying to convert existing language server configuration you should copy all of it’s properties(e. g. :request-handlers, activation-fn, etc).

(lsp-register-client
 (make-lsp-client :new-connection (lsp-tramp-connection "binary-or-full-path")
                  :major-modes '(python-mode)
                  :remote? t
                  :server-id 'pyls-remote))

Dealing with stderr

With TRAMP, Emacs does not have an easy way to distinguish stdout and stderr, so when the underlying LSP process writes to stderr, it breaks the lsp-mode parser. As a workaround, lsp-mode is redirecting stderr to /tmp/<process-name>-<id>~stderr.

Limitations

File watches

When some of the workspaces that are active in the current project requests file notifications via workspace/didChangeWatchedFiles lsp-mode will start monitoring each of the folders in the workspace for changes. In case your project contains a lot of files you might want to disable file monitoring via lsp-enable-file-watchers (you may use dir-locals).

Contributions

Contributions are very much welcome.

Here is a throughput graph of the repository for the last few weeks:

Troubleshooting

set lsp-log-io to t to inspect communication between client and the server.
lsp-describe-session will show the current projects roots + the started severs and allows inspecting the server capabilities.

Adding support for languages

Registering server

Here it is the minimal configuration that is needed for new language server registration. Refer to the documentation of lsp-client.el for the additional settings supported on registration time. lsp-language-id-configuration must be updated to contain the corresponding mode -> language id - in this case (python-mode . "python")

(defvar lsp-language-id-configuration
  '(...
   (python-mode . "python")
   ...))
;; if you are adding the support for your language server in separate repo use
;; (add-to-list 'lsp-language-id-configuration '(python-mode . "python"))

(lsp-register-client
 (make-lsp-client :new-connection (lsp-stdio-connection "pyls")
                  :major-modes '(python-mode)
                  :server-id 'pyls))

Sections

lsp-mode provides tools to bridge emacs defcustom as a language configuration sections properties(see specification workspace/configuration). In addition you may use lsp-generate-settings from Generate Settings script to generate defcustom from package.json VScode plugin manifest. Example:

(defcustom lsp-foo-language-server-property "bar"
  "Demo property."
  :group 'foo-ls
  :risky t)

(lsp-register-custom-settings '(("foo.section.property" lsp-foo-language-server-property)))

(lsp-configuration-section  "foo")
;; =>  (("foo" ("settings" ("property" . "bar"))))

FAQ

How to configure a server with local variables?
- Add lsp server call to hack-local-variables-hook which runs right after the local variables are loaded.
```
(add-hook 'hack-local-variables-hook
          (lambda () (when (derived-mode-p 'XXX-mode) (lsp))))
        
```
I have multiple language servers registered for language FOO. Which one will be used when opening a project?
- The one with highest priority wins. lsp-clients.el predefined servers have priority -1, lower than external packages (priority 0 if unspecified). If a server is registered with :add-on? flag set to t it will be started in parallel to the other servers that are registered for the current mode.
I have multiple language servers for language FOO and I want to select the server per project, what can I do?
- You may create dir-local for each of the projects and specify list of lsp-enabled-clients. This will narrow the list of the clients that are going to be tested for the project.
The completion does not work fine and inserts arguments and placeholders, what I am doing wrong?
- Snippet support works only with company-lsp so if you are using completion-at-point the snippets won’t be expanded and you should either disable them by setting lsp-enable-snippet to nil or you should switch to company-lsp. Note also that company-tng frontend does not support snippet expansion(see company-mode#891)

linux-xhyang/lsp-mode

Language Server Protocol Support for Emacs

Table of Contents

Why?

Overview

Installation

Install via melpa

Configuration

Install language server

Configure lsp-mode

Vanilla Emacs

Spacemacs

use-package

How does it work?

Supported languages

Commands

Settings

Screenshots

Extensions

TRAMP

How does it work?

Sample configuration

Dealing with stderr

Limitations

File watches

Contributions

Troubleshooting

Adding support for languages

Registering server

Sections

FAQ

See also