linux4sam/at91bootstrap

Issues

• CMAC Caluclation

  #184 opened 2 months ago by tatowicz
  0

• Yocto build error, please pick e9d110d into 3.x branch

  #183 opened 2 months ago by HiFiPhile
  0

• Enabling MMU and CACHES lead to "SDHC: Error: No Card Inserted"

  #182 opened 3 months ago by SimoneBongini
  0

• KSZ8995 RMII Port Interface with NUC980DK63YC

  #178 opened 3 months ago by Gurupawaskar
  1

• andriod4sam_v4.0 tag breaks buildroot

  #176 opened 4 months ago by ringlej
  1

• SAM9X60: Using FLEXCOM0 for SPI Flash Boot

  #181 opened 4 months ago by LeSpocky
  1

• 9X60ek CONFIG_CONSOLE_INDEX > 0 no output

  #180 opened 5 months ago by chrishsieh
  0

• Please merge memcpy() fix cc0af5d to 3.x branch

  #179 opened 5 months ago by HiFiPhile
  1

• CONFIG_NAND_TIMING_MODE not working on sam9x60 custom board

  #174 opened 10 months ago by LeSpocky
  10

• SiP: SoC dependent RAM init

  #142 opened 3 years ago by LeSpocky
  8

• EMMC data end bit error

  #162 opened 2 years ago by HiFiPhile
  2

• ACT8865 disable console workaround does not work

  #173 opened a year ago by Duvalcle
  1

• SAMA5D27 SOM with eMMC, Bootloader gives SDHC: Error detected in status: 0x8020, 0x40

  #172 opened a year ago by philchu128
  1

• SAMA5D2 Xplained SD highspeed sd cards issue using at91bootstrap v4.0.1

  #149 opened 3 years ago by afinfante
  9

• sam9x60-curiosity: Parsing hardware information from EEPROM fails

  #169 opened a year ago by LeSpocky
  0

• OPTEE stuck at AT91bootstrap

  #168 opened a year ago by SimoneBongini
  1

• Board based on SAM9x60EK stuck at AT91Bootstrap

  #167 opened a year ago by lumapii
  0

• Problem detecting eMMC from uboot

  #166 opened 2 years ago by anho13
  0

• problem loading from uSD card

  #165 opened 2 years ago by Gurupawaskar
  1

• AT91SAM9G45 boot hang / bricked

  #161 opened 2 years ago by Happytec
  0

• SAMA5D2 at91Bootstrap 4.0.1: SDHC no card inserted

  #154 opened 2 years ago by UltimateRiggsy
  12

• while sd card connected

  #158 opened 2 years ago by Gurupawaskar
  5

• Why no THUMB mode for SAMA5D3X?

  #152 opened 2 years ago by lnksz
  10

• driver/sdram.c: Potential breakage due to naive code

  #155 opened 2 years ago by a3f
  4

• Contrib folder removed in v4.x

  #144 opened 3 years ago by elockman
  10

• Debugging with Eclipse on Linux

  #153 opened 3 years ago by lnksz
  6

• Output in .config for DDR is confusing

  #151 opened 3 years ago by 234d
  1

• make oldconfig infinite loop with SPI_IOSET

  #148 opened 3 years ago by celledge
  2

• bootstrap on eMMC - 2GB (skyhigh v5.1 - SkyHighMemory_S40FC002_DS)

  #146 opened 3 years ago by khaledkrayem
  48

• SAMA5D27 bootstrap access to eMMC

  #137 opened 3 years ago by torojoel
  21

• Suspicious (?) RAM performance on SAMA5D2

  #122 opened 3 years ago by zougloub
  12

• Unselecting an LED causes compile errors

  #139 opened 3 years ago by Saiberion
  7

• Where are the AT91SAM9G20 and AT91SAM9Gx5 board and config files?

  #138 opened 3 years ago by liviorecchia
  1

• -nostartfiles is not an LDFLAG

  #127 opened 4 years ago by celledge
  14

• v4 fails to load Linux kernel

  #126 opened 3 years ago by edgar-bonet
  26

• v4 build error: undefined reference to `get_cm_sn'

  #124 opened 4 years ago by edgar-bonet
  3

• emmc boot issue

  #123 opened 4 years ago by hoseck
  1

• Timeouts on custom SAMA5D27 board

  #121 opened 4 years ago by fabioestevam
  15

• SAM9X60 DDR2 SIP Boot Issue

  #118 opened 4 years ago by mikucukyilmaz
  9

• Configuration of OSMC RAM Scrambling

  #114 opened 4 years ago by lnksz
  5

• Compile error (clk-common.c:265:10: error: ‘AT91C_ID_SMD’ undeclared)

  #116 opened 4 years ago by ruslan-gennadievich
  5

• we are using ATSAMA5D27-D1G-CU in our prject. we used eMMC as a boot media. SDMMC0_VDDSEL is this mandatory to use? can we use VDDSDHC for 3.3V alone for booting and other read and write operation?

  #110 opened 4 years ago by shiva-kumar35
  2

• eMMC init issue

  #107 opened 5 years ago by arahowerya
  23

• How feasible is adding an u-boot like environment to at91bootstrap

  #106 opened 5 years ago by fberndl
  8

• sam9x60 : qspi boot error

  #103 opened 5 years ago by FabienLehoussel
  12

• problem loading uboot from emmc

  #105 opened 5 years ago by IvanZholubak7
  28

• sam9x60_early branch report undefined reference to `get_cm_rev'

  #101 opened 5 years ago by zizimumu
  4

• problem loading uboot from emmc

  #98 opened 5 years ago by n3b0j5a
  20

• Are configurations with "mem=" in kernel command line known to work with recent kernels (>=4.9)?

  #90 opened 6 years ago by antonsviridenko
  3

• Why the pin NANDRDY is not initialized in nandflash_hw_init()?

  #86 opened 6 years ago by antonsviridenko
  4