The NEORV32 RISC-V Processor

Overview
Project Status
Features
FPGA Implementation Results
Performance
Top Entities
Getting Started
Contribute/Feedback/Questions
Legal

Overview

The NEORV32 Processor is a customizable microcontroller-like system on chip (SoC) that is based on the RISC-V-compliant NEORV32 CPU. The processor is intended as ready-to-go auxiliary processor within a larger SoC designs or as stand-alone custom microcontroller.

The project’s change log is available in the CHANGELOG.md file in the root directory of this repository. To see the changes between releases visit the project's release page. For more detailed information take a look at the 📄 NEORV32 data sheet (pdf).

Key Features

RISC-V-compliant 32-bit rv32i NEORV32 CPU, compliant to
- Subset of the Unprivileged ISA Specification (Version 2.2)
- Subset of the Privileged Architecture Specification (Version 1.12-draft)
Optional RISC-V CPU extensions
- A - atomic memory access instructions
- C - compressed instructions (16-bit)
- E - embedded CPU (reduced register file)
- M - integer multiplication and division hardware
- U - less-privileged user mode
- Zicsr - control and status register access instructions (+ exception/irq system)
- Zifencei - instruction stream synchronization
- PMP - physical memory protection
Full-scale RISC-V microcontroller system / SoC NEORV32 Processor with optional submodules
- optional embedded memories (instructions/data/bootloader, RAM/ROM)
- timers (watch dog, RISC-V-compliant machine timer)
- serial interfaces (SPI, TWI, UART) and general purpose IO
- external bus interface (Wishbone / AXI4)
- more ...
Software framework
- core libraries for high-level usage of the provided functions and peripherals
- application compilation based on GNU makefiles
- GCC-based toolchain (pre-compiled toolchains available)
- runtime environment
- several example programs
- doxygen-based documentation: available on GitHub pages
- FreeRTOS port available
Full-blown data sheet (pdf)
Completely described in behavioral, platform-independent VHDL - no primitives, macros, etc.
Fully synchronous design, no latches, no gated clocks
Small hardware footprint and high operating frequency

Design Principles

From zero to hello_world: Completely open source and documented.
Plain VHDL without technology-specific parts like attributes, macros or primitives.
Easy to use – working out of the box.
Clean synchronous design, no wacky combinatorial interfaces.
Be as small as possible – but with a reasonable size-performance tradeoff.
Be as RISC-V-compliant as possible.
The processor has to fit in a Lattice iCE40 UltraPlus 5k low-power FPGA running at 20+ MHz.

Status

The processor is synthesizable (tested on real hardware using Intel Quartus Prime, Xilinx Vivado and Lattice Radiant/Synplify Pro) and can successfully execute all the provided example programs including the CoreMark benchmark.

The processor passes the official rv32_m/C, rv32_m/I, rv32_m/M, rv32_m/privilege and rv32_m/Zifencei RISC-V compliance tests (new framework v2).

Project component	CI status	Note
NEORV32 processor
Pre-built toolchain
RISC-V compliance test		See riscv-compliance/README.md

To-Do / Wish List / Help Wanted

Use LaTeX for data sheet
Further size and performance optimization (work in progress)
A cache for the external memory/bus interface (work in progress)
Burst mode for the external memory/bus interface
RISC-V B extension (bitmanipulation) (shelved)
Synthesis results (+ wrappers?) for more/specific platforms
More support for FreeRTOS
Port additional RTOSs (like Zephyr or RIOT)
Single-precision floating point unit (F) (planned)
Implement further RISC-V (or custom?) CPU extensions
Add debugger (RISC-V debug spec)
Add memory-mapped trigger to testbench to quit simulation (using VHDL2008's use std.env.finish;) - but how? 🤔
...
Ideas?

Features

The full-blown data sheet of the NEORV32 Processor and CPU is available as pdf file: 📄 NEORV32 data sheet.

NEORV32 Processor Features

The NEORV32 Processor provides a full-scale microcontroller-like SoC based on the NEORV32 CPU. The setup is highly customizable via the processor's top generics and already provides the following optional modules:

processor-internal data and instruction memories (DMEM / IMEM)
internal Bootloader with UART console and automatic application boot from SPI flash option
machine system timer (MTIME), RISC-V-compliant
watchdog timer (WDT)
universal asynchronous receiver and transmitter (UART) with simulation output option via text.io
8/16/24/32-bit serial peripheral interface controller (SPI) with 8 dedicated chip select lines
two wire serial interface controller (TWI), with optional clock-stretching, compatible to the I²C standard
general purpose parallel IO port (GPIO), 32xOut & 32xIn, with pin-change interrupt
32-bit external bus interface, Wishbone b4 compliant (WISHBONE), standard or pipelined handshake/transactions mode
wrapper for AXI4-Lite Master Interface (see AXI Connectivity)
PWM controller with 4 channels and 8-bit duty cycle resolution (PWM)
GARO-based true random number generator (TRNG)
custom functions units (CFU0 and CFU1) for tightly-coupled custom co-processors
system configuration information memory to check hardware configuration by software (SYSINFO, mandatory - not optional)

NEORV32 CPU Features

The NEORV32 CPU is compliant to the official RISC-V specifications (2.2) including a subset of the RISC-V privileged architecture specifications (1.12-draft) tested via the official RISC-V Compliance Test Framework (see riscv-compliance/README).

More information regarding the CPU including a detailed list of the instruction set and the available CSRs can be found in the 📄 NEORV32 data sheet.

General:

Modified Harvard architecture (separate CPU interfaces for data and instructions; NEORV32 processor: Single processor-internal bus via I/D mux)
Two stages in-order pipeline (FETCH, EXECUTE); each stage uses a multi-cycle processing scheme
No hardware support of unaligned accesses - they will trigger an exception
BIG-ENDIAN byte-order, processor's external memory interface allows endianness configuration to connect to system with different endianness
All reserved or unimplemented instructions will raise an illegal instruction exception
Privilege levels: machine mode, user mode (if enabled via U extension)
Official RISC-V open-source architecture ID

RV32I base instruction set (I extension):

ALU instructions: LUI AUIPC ADDI SLTI SLTIU XORI ORI ANDI SLLI SRLI SRAI ADD SUB SLL SLT SLTU XOR SRL SRA OR AND
Jump and branch instructions: JAL JALR BEQ BNE BLT BGE BLTU BGEU
Memory instructions: LB LH LW LBU LHU SB SH SW
System instructions: ECALL EBREAK FENCE
Pseudo-instructions are not listed

Compressed instructions (C extension):

ALU instructions: C.ADDI4SPN C.ADDI C.ADD C.ADDI16SP C.LI C.LUI C.SLLI C.SRLI C.SRAI C.ANDI C.SUB C.XOR C.OR C.AND C.MV C.NOP
Jump and branch instructions: C.J C.JAL C.JR C.JALR C.BEQZ C.BNEZ
Memory instructions: C.LW C.SW C.LWSP C.SWSP
System instructions: C.EBREAK (only with Zicsr extension)
Pseudo-instructions are not listed

Embedded CPU version (E extension):

Reduced register file (only the 16 lowest registers)

Integer multiplication and division hardware (M extension):

Multiplication instructions: MUL MULH MULHSU MULHU
Division instructions: DIV DIVU REM REMU
By default, the multiplier and divider cores use an iterative bit-serial processing scheme
Multiplications can be mapped to DSPs via the FAST_MUL_EN generic to increase performance

Atomic memory access (A extension):

Supported instructions: LR.W (load-reservate) SC.W (store-conditional)

Privileged architecture / CSR access (Zicsr extension):

Privilege levels: M-mode (Machine mode)
CSR access instructions: CSRRW CSRRS CSRRC CSRRWI CSRRSI CSRRCI
System instructions: MRET WFI
Pseudo-instructions are not listed
Counter CSRs: cycle cycleh instret instreth time timeh mcycle mcycleh minstret minstreth
Machine CSRs: mstatus mstatush misa(read-only!) mie mtvec mscratch mepc mcause mtval mip mvendorid marchid mimpid mhartid mzext(custom)
Supported exceptions and interrupts:
- Misaligned instruction address
- Instruction access fault (via unacknowledged bus access after timeout)
- Illegal instruction
- Breakpoint (via ebreak instruction)
- Load address misaligned
- Load access fault (via unacknowledged bus access after timeout)
- Store address misaligned
- Store access fault (via unacknowledged bus access after timeout)
- Environment call from U-mode (via ecall instruction in user mode)
- Environment call from M-mode (via ecall instruction in machine mode)
- Machine timer interrupt mti (via processor's MTIME unit / external signal)
- Machine software interrupt msi (via external signal)
- Machine external interrupt mei (via external signal)
- Four fast interrupt requests (custom extension)

Privileged architecture / User mode (U extension, requires Zicsr extension):

Privilege levels: M-mode (Machine mode) + U-mode (User mode)

Privileged architecture / instruction stream synchronization (Zifencei extension):

System instructions: FENCE.I

Privileged architecture / Physical memory protection (PMP, requires Zicsr extension):

Additional machine CSRs: pmpcfg0 pmpcfg1 pmpaddr0 pmpaddr1 pmpaddr2 pmpaddr3 pmpaddr4 pmpaddr5 pmpaddr6 pmpaddr7

Non-RISC-V-Compliant Issues

CPU and Processor are BIG-ENDIAN, but this should be no problem as the external memory bus interface provides big- and little-endian configurations
misa CSR is read-only - no dynamic enabling/disabling of synthesized CPU extensions during runtime; for compatibility: write accesses (in m-mode) are ignored and do not cause an exception
The physical memory protection (PMP) only supports NAPOT mode, a minimal granularity of 8 bytes and only up to 8 regions
The A extension only implements lr.w and sc.w instructions yet. However, these instructions are sufficient to emulate all further AMO operations
The mcause trap code 0x80000000 (originally reserved in the RISC-V specs) is used to indicate a hardware reset (non-maskable reset).

NEORV32-Specific CPU Extensions

The NEORV32-specific extensions are always enabled and are indicated via the X bit in the misa CSR.

Four fast interrupt request channels with according control/status bits in mie and mip and custom exception codes in mcause
mzext CSR to check for implemented Z* CPU extensions (like Zifencei)
All undefined/umimplemented/malformed/illegal instructions do raise an illegal instruction exception

FPGA Implementation Results

NEORV32 CPU

This chapter shows exemplary implementation results of the NEORV32 CPU for an Intel Cyclone IV EP4CE22F17C6N FPGA on a DE0-nano board. The design was synthesized using Intel Quartus Prime Lite 20.1 ("balanced implementation"). The timing information is derived from the Timing Analyzer / Slow 1200mV 0C Model. If not otherwise specified, the default configuration of the CPU's generics is assumed (for example no PMP). No constraints were used at all. The u and Zifencei extensions have a negligible impact on the hardware requirements.

Results generated for hardware version 1.4.9.0.

CPU Configuration	LEs	FFs	Memory bits	f_max
`rv32i`	1190	512	2048	120 MHz
`rv32i` + `u` + `Zicsr` + `Zifencei`	1927	903	2048	123 MHz
`rv32im` + `u` + `Zicsr` + `Zifencei`	2471	1148	2048	120 MHz
`rv32imc` + `u` + `Zicsr` + `Zifencei`	2716	1165	2048	120 MHz
`rv32imac` + `u` + `Zicsr` + `Zifencei`	2736	1168	2048	122 MHz

Setups with enabled "embedded CPU extension" E show the same LUT and FF utilization and identical f_max. However, the size of the register file is cut in half.

NEORV32 Processor-Internal Peripherals and Memories

Results generated for hardware version 1.4.9.0.

Module	Description	LEs	FFs	Memory bits	DSPs
BOOT ROM	Bootloader ROM (default 4kB)	3	1	32 768	0
BUSSWITCH	Mux for CPU I & D interfaces	65	8	0	0
CFU0	Custom functions unit 0	-	-	-	-
CFU1	Custom functions unit 1	-	-	-	-
DMEM	Processor-internal data memory (default 8kB)	6	2	65 536	0
GPIO	General purpose input/output ports	67	65	0	0
IMEM	Processor-internal instruction memory (default 16kb)	6	2	131 072	0
MTIME	Machine system timer	274	166	0	0
PWM	Pulse-width modulation controller	71	69	0	0
SPI	Serial peripheral interface	138	124	0	0
SYSINFO	System configuration information memory	11	10	0	0
TRNG	True random number generator	132	105	0	0
TWI	Two-wire interface	77	46	0	0
UART	Universal asynchronous receiver/transmitter	176	132	0	0
WDT	Watchdog timer	60	45	0	0
WISHBONE	External memory interface	129	104	0	0

NEORV32 Processor - Exemplary FPGA Setups

Exemplary processor implementation results for different FPGA platforms. The processor setup uses the default peripheral configuration (like no CFUs and no TRNG), no external memory interface and only internal instruction and data memories. IMEM uses 16kB and DMEM uses 8kB memory space. The setup's top entity connects most of the processor's top entity signals to FPGA pins - except for the Wishbone bus and the interrupt signals. The "default" strategy of each toolchain is used.

Results generated for hardware version 1.4.9.0.

Vendor	FPGA	Board	Toolchain	CPU Configuration	LUT / LE	FF / REG	Memory Bits	BRAM / EBR	SPRAM	Frequency
Intel	Cyclone IV `EP4CE22F17C6N`	Terasic DE0-Nano	Quartus Prime Lite 20.1	`rv32imc` + `u` + `Zicsr` + `Zifencei`	3813 (17%)	1904 (8%)	231424 (38%)	-	-	119 MHz
Lattice	iCE40 UltraPlus `iCE40UP5K-SG48I`	Upduino v2.0	Radiant 2.1 (Synplify Pro)	`rv32ic` + `u` + `Zicsr` + `Zifencei`	4397 (83%)	1679 (31%)	-	12 (40%)	4 (100%)	c 22.15 MHz
Xilinx	Artix-7 `XC7A35TICSG324-1L`	Arty A7-35T	Vivado 2019.2	`rv32imc` + `u` + `Zicsr` + `Zifencei` + `PMP`	2465 (12%)	1912 (5%)	-	8 (16%)	-	c 100 MHz

Notes

The Lattice iCE40 UltraPlus setup uses the FPGA's SPRAM memory primitives for the internal IMEM and DMEM (each 64kb). The FPGA-specific memory components can be found in rtl/fpga_specific.
The clock frequencies marked with a "c" are constrained clocks. The remaining ones are f_max results from the place and route timing reports.
The Upduino and the Arty board have on-board SPI flash memories for storing the FPGA configuration. These device can also be used by the default NEORV32 bootloader to store and automatically boot an application program after reset (both tested successfully).
The setups with PMP implement 2 regions with a minimal granularity of 64kB.

Performance

CoreMark Benchmark

The CoreMark CPU benchmark was executed on the NEORV32 and is available in the sw/example/coremark project folder. This benchmark tests the capabilities of a CPU itself rather than the functions provided by the whole system / SoC.

Results generated for hardware version 1.4.7.0.

**Configuration**
Hardware:       32kB IMEM, 16kB DMEM, 100MHz clock
CoreMark:       2000 iterations, MEM_METHOD is MEM_STACK
Compiler:       RISCV32-GCC 10.1.0 (rv32i toolchain)
Compiler flags: default, see makefile
Peripherals:    UART for printing the results

CPU	Executable Size	Optimization	CoreMark Score	CoreMarks/MHz
`rv32i`	27 424 bytes	`-O3`	35.71	0.3571
`rv32im`	26 232 bytes	`-O3`	66.66	0.6666
`rv32imc`	20 876 bytes	`-O3`	66.66	0.6666
`rv32imc` + `FAST_MUL_EN`	20 876 bytes	`-O3`	83.33	0.8333
`rv32imc` + `FAST_MUL_EN` + `FAST_SHIFT_EN`	20 876 bytes	`-O3`	86.96	0.8696

The FAST_MUL_EN configuration uses DSPs for the multiplier of the M extension (enabled via the FAST_MUL_EN generic). The FAST_SHIFT_EN configuration uses a barrel shifter for CPU shift operations (enabled via the FAST_SHIFT_EN generic).

When the C extension is enabled, branches to an unaligned uncompressed instruction require additional instruction fetch cycles.

Instruction Cycles

The NEORV32 CPU is based on a two-stages pipelined architecutre. Each stage uses a multi-cycle processing scheme. Hence, each instruction requires several clock cycles to execute (2 cycles for ALU operations, ..., 40 cycles for divisions). The average CPI (cycles per instruction) depends on the instruction mix of a specific applications and also on the available CPU extensions.

Please note that by default the CPU-internal shifter (e.g. for the SLL instruction) as well as the multiplier and divider of the M extension use a bit-serial approach and require several cycles for completion.

The following table shows the performance results for successfully running 2000 CoreMark iterations, which reflects a pretty good "real-life" work load. The average CPI is computed by dividing the total number of required clock cycles (only the timed core to avoid distortion due to IO wait cycles; sampled via the cycle[h] CSRs) by the number of executed instructions (instret[h] CSRs). The executables were generated using optimization -O3.

Results generated for hardware version 1.4.7.0.

CPU	Required Clock Cycles	Executed Instructions	Average CPI
`rv32i`	5 648 997 774	1 469 233 238	3.84
`rv32im`	3 036 749 774	601 871 338	5.05
`rv32imc`	3 036 959 882	615 034 616	4.94
`rv32imc` + `FAST_MUL_EN`	2 454 407 882	615 034 588	3.99
`rv32imc` + `FAST_MUL_EN` + `FAST_SHIFT_EN`	2 320 308 322	615 034 676	3.77

When the C extension is enabled branches to an unaligned uncompressed instruction require additional instruction fetch cycles.

Top Entities

The top entity of the NEORV32 Processor (SoC) is rtl/core/neorv32_top.vhd.

All signals of the top entity are of type std_ulogic or std_ulogic_vector, respectively (except for the processor's TWI signals, which are of type std_logic). Leave all unused output ports unconnected (open) and tie all unused input ports to zero ('0' or (others => '0'), respectively).

Use the top's generics to configure the system according to your needs. Each generic is initilized with the default configuration. Detailed information regarding the interface signals and configuration generics can be found in the 📄 NEORV32 data sheet (pdf).

Using the CPU in Stand-Alone Mode

If you do not want to use the NEORV32 processor setup, you can also use the CPU in stand-alone mode and build your own system around it. The top entity of the stand-alone NEORV32 CPU is rtl/core/neorv32_cpu.vhd. Note that the CPU uses a proprietary interface for accessing data and instruction memory. More information can be found in the 📄 NEORV32 data sheet.

⚠️ It is recommended to use the processor setup even if you only want to use the CPU. Simply disable all the processor-internal modules via the generics and you will get a "CPU wrapper" that provides a minimal CPU environment and an external memory interface (like AXI4). This setup also allows to further use the default bootloader and application makefiles. From this base you can start building your own processor system.

Alternative Top Entities

Alternative top entities, like the simplified "hello world" test setup or CPU/Processor wrappers with resolved port signal types (i.e. std_logic), can be found in rtl/top_templates.

AXI4 Connectivity

Via the rtl/top_templates/neorv32_top_axi4lite.vhd wrapper the NEORV32 provides an AXI4-Lite compatible master interface. This wrapper instantiates the default NEORV32 processor top entitiy and implements a Wishbone to AXI4-Lite bridge.

The AXI4-Lite interface has been tested using Xilinx Vivado 19.2 block designer:

The processor was packed as custom IP using neorv32_top_axi4lite.vhd as top entity. The AXI interface is automatically detected by the packager. All remaining IO interfaces are available as custom signals. The configuration generics are available via the "customize IP" dialog. In the figure above the resulting IP block is named "neorv32_top_axi4lite_v1_0". (Note: Use Syntheiss option "global" when generating the block design to maintain the internal TWI tri-state drivers.)

The setup uses an AXI interconnect to attach two block RAMs to the processor. Since the processor in this example is configured without IMEM and DMEM, the attached block RAMs are used for storing instructions and data: the first RAM is used as instruction memory and is mapped to address 0x00000000 - 0x00003fff (16kB), the second RAM is used as data memory and is mapped to address 0x80000000 - 0x80001fff (8kB).

Getting Started

This overview is just a short excerpt from the Let's Get It Started section of the NEORV32 documentary:

📄 NEORV32 data sheet

Toolchain

At first you need the RISC-V GCC toolchain. You can either download the sources and build the toolchain by yourself, or you can download a prebuilt one and install it.

⚠️ Keep in mind that – for instance – a rv32imc toolchain only provides library code compiled with compressed and mul/div instructions! Hence, this code cannot be executed (without emulation) on an architecture without these extensions!

To build the toolchain by yourself, follow the official build instructions. Make sure to use the ilp32 or ilp32e ABI.

Alternatively, you can download a prebuilt toolchain. I have uploaded the toolchains I am using to GitHub. These toolchains were compiled on a 64-bit x86 Ubuntu 20.04 LTS (Ubuntu on Windows, actually). Download the toolchain of choice: github.com/stnolting/riscv_gcc_prebuilt

Dowload the NEORV32 Project

Get the sources of the NEORV32 Processor project. The simplest way is using git clone (suggested for easy project updates via git pull):

$ git clone https://github.com/stnolting/neorv32.git

Alternatively, you can either download a specific release or get the most recent version of this project as *.zip file.

Create a new Hardware Project

Create a new project with your FPGA design tool of choice. Add all the *.vhd files from the rtl/core folder to this project. Make sure to add these files to a new design library called neorv32.

You can either instantiate the processor's top entity or one of its wrappers in your own project. If you just want to try out the processor, you can use the simple test setup as top entity.

This test setup instantiates the processor and implements most of the peripherals and some ISA extensions. Only the UART lines, clock, reset and some GPIO output signals are propagated as actual entity signals. Basically, it is a FPGA "hello world" example:

  entity neorv32_test_setup is
    port (
      -- Global control --
      clk_i      : in  std_ulogic := '0'; -- global clock, rising edge
      rstn_i     : in  std_ulogic := '0'; -- global reset, low-active, async
      -- GPIO --
      gpio_o     : out std_ulogic_vector(7 downto 0); -- parallel output
      -- UART --
      uart_txd_o : out std_ulogic; -- UART send data
      uart_rxd_i : in  std_ulogic := '0' -- UART receive data
    );
  end neorv32_test_setup;

Check the Toolchain

Make sure GNU Make and a native GCC compiler are installed. To test the installation of the RISC-V toolchain navigate to an example project like sw/example/blink_led and run:

neorv32/sw/example/blink_led$ make check

Compiling an Example Program

The NEORV32 project includes some example programs from which you can start your own application. Simply compile one of these projects. This will create a NEORV32 executable neorv32_exe.bin in the same folder:

neorv32/sw/example/blink_led$ make clean_all exe

Upload the Executable via the Bootloader

You can upload a generated executable directly from the command line using the makefile's upload target. Replace /dev/ttyUSB0 with the according serial port.

sw/exeample/blink_example$ make COM_PORT=/dev/ttyUSB0` upload

A more "secure" way is to use a dedicated terminal program. This allows to directly interact with the bootloader console. Connect your FPGA board via UART to your computer and open the according port to interface with the NEORV32 bootloader. The bootloader uses the following default UART configuration:

19200 Baud
8 data bits
1 stop bit
No parity bits
No transmission / flow control protocol (raw bytes only)
Newline on \r\n (carriage return & newline) - also for sent data

Use the bootloader console to upload the neorv32_exe.bin executable and run your application image.

  << NEORV32 Bootloader >>
  
  BLDV: Nov  7 2020
  HWV:  0x01040606
  CLK:  0x0134FD90 Hz
  USER: 0x0001CE40
  MISA: 0x42801104
  PROC: 0x03FF0035
  IMEM: 0x00010000 bytes @ 0x00000000
  DMEM: 0x00010000 bytes @ 0x80000000
  
  Autoboot in 8s. Press key to abort.
  Aborted.
  
  Available CMDs:
   h: Help
   r: Restart
   u: Upload
   s: Store to flash
   l: Load from flash
   e: Execute
  CMD:> u
  Awaiting neorv32_exe.bin... OK
  CMD:> e
  Booting...
  
  Blinking LED demo program

Going further: Take a look at the Let's Get It Started! chapter of the 📄 NEORV32 data sheet.

Contribute/Feedback/Questions

I'm always thankful for help! So if you have any questions, bug reports, ideas or if you want to give some kind of feedback, feel free to 💡 open a new issue, start a new ✨ discussion on GitHub or directly 📧 drop me a line.

If you'd like to directly contribute to this repository:

⭐ this repository ;)
Check out the project's code of conduct
Fork this repository and clone the fork
Create a feature branch in your fork: git checkout -b awesome_new_feature_branch
Create a new remote for the upstream repo: git remote add upstream https://github.com/stnolting/neorv32
Commit your modifications: git commit -m "Awesome new feature!"
Push to the branch: git push origin awesome_new_feature_branch
Create a new pull request

Legal

This project is released under the BSD 3-Clause license. No copyright infringement intended. Other implied or used projects might have different licensing - see their documentation to get more information.

Citing

If you are using the NEORV32 or some parts of the project in some kind of publication, please cite it as follows:

S. Nolting, "The NEORV32 Processor", github.com/stnolting/neorv32

BSD 3-Clause License

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Limitation of Liability for External Links

Our website contains links to the websites of third parties ("external links"). As the content of these websites is not under our control, we cannot assume any liability for such external content. In all cases, the provider of information of the linked websites is liable for the content and accuracy of the information provided. At the point in time when the links were placed, no infringements of the law were recognisable to us. As soon as an infringement of the law becomes known to us, we will immediately remove the link in question.

Proprietary Notice

"Artix" and "Vivado" are trademarks of Xilinx Inc.

"Cyclone", "Quartus Prime Lite" and "Avalon Bus" are trademarks of Intel Corporation.

"iCE40", "UltraPlus" and "Radiant" are trademarks of Lattice Semiconductor Corporation.

"AXI", "AXI4" and "AXI4-Lite" are trademarks of Arm Holdings plc.

Acknowledgements

RISC-V - Instruction Sets Want To Be Free!

Continous integration provided by Travis CI and powered by GHDL.

This project is not affiliated with or endorsed by the Open Source Initiative (https://www.oshwa.org / https://opensource.org).

Made with ☕ in Hannover, Germany 🇪🇺

liuhubing/neorv32

The NEORV32 RISC-V Processor

Overview

Key Features

Design Principles

Status

To-Do / Wish List / Help Wanted

Features

NEORV32 Processor Features

NEORV32 CPU Features

Non-RISC-V-Compliant Issues

NEORV32-Specific CPU Extensions

FPGA Implementation Results

NEORV32 CPU

NEORV32 Processor-Internal Peripherals and Memories

NEORV32 Processor - Exemplary FPGA Setups

Performance

CoreMark Benchmark

Instruction Cycles

Top Entities

Using the CPU in Stand-Alone Mode

Alternative Top Entities

AXI4 Connectivity

Getting Started

Toolchain

Dowload the NEORV32 Project

Create a new Hardware Project

Check the Toolchain

Compiling an Example Program

Upload the Executable via the Bootloader

Contribute/Feedback/Questions

Legal

Citing

BSD 3-Clause License

Limitation of Liability for External Links

Proprietary Notice

Acknowledgements