/sd-webui-controlnet

WebUI extension for ControlNet

Primary LanguagePythonMIT LicenseMIT

sd-webui-controlnet

(WIP) WebUI extension for ControlNet and T2I-Adapter

This extension is for AUTOMATIC1111's Stable Diffusion web UI, allows the Web UI to add ControlNet to the original Stable Diffusion model to generate images. The addition is on-the-fly, the merging is not required.

ControlNet is a neural network structure to control diffusion models by adding extra conditions.

Thanks & Inspired: kohya-ss/sd-webui-additional-networks

Limits

  • Dragging large file on the Web UI may freeze the entire page. It is better to use the upload file option instead.
  • Just like WebUI's hijack, we used some interpolate to accept arbitrary size configure (see scripts/cldm.py)

Install

  1. Open "Extensions" tab.
  2. Open "Install from URL" tab in the tab.
  3. Enter URL of this repo to "URL for extension's git repository".
  4. Press "Install" button.
  5. Reload/Restart Web UI.

Upgrade gradio if any ui issues occured: pip install gradio==3.16.2

Usage

  1. Put the ControlNet models (.pt, .pth, .ckpt or .safetensors) inside the models/ControlNet folder.
  2. Open "txt2img" or "img2img" tab, write your prompts.
  3. Press "Refresh models" and select the model you want to use. (If nothing appears, try reload/restart the webui)
  4. Upload your image and select preprocessor, done.

Currently it supports both full models and trimmed models. Use extract_controlnet.py to extract controlnet from original .pth file.

Pretrained Models: https://huggingface.co/lllyasviel/ControlNet/tree/main/models

Extraction

Two methods can be used to reduce the model's filesize:

  1. Directly extract controlnet from original .pth file using extract_controlnet.py.

  2. Transfer control from original checkpoint by making difference using extract_controlnet_diff.py.

All type of models can be correctly recognized and loaded. The results of different extraction methods are discussed in lllyasviel/ControlNet#12 and Mikubill#73.

Pre-extracted model: https://huggingface.co/webui/ControlNet-modules-safetensors

Pre-extracted difference model: https://huggingface.co/kohya-ss/ControlNet-diff-modules

T2I-Adapter Support

Note that the impl is experimental, result may differ from original repo. See Adapter Examples for reference.

To use T2I-Adapter models:

  1. Download files from https://huggingface.co/TencentARC/T2I-Adapter
  2. Copy corresponding config file and rename it to the same name as the model - see list below.
  3. It's better to use a slightly lower strength (t) when generating images with sketch model, such as 0.6-0.8. (ref: ldm/models/diffusion/plms.py)
Adapter Config
t2iadapter_canny_sd14v1.pth sketch_adapter_v14.yaml
t2iadapter_sketch_sd14v1.pth sketch_adapter_v14.yaml
t2iadapter_seg_sd14v1.pth image_adapter_v14.yaml
t2iadapter_keypose_sd14v1.pth image_adapter_v14.yaml
t2iadapter_openpose_sd14v1.pth image_adapter_v14.yaml
t2iadapter_color_sd14v1.pth t2iadapter_color_sd14v1.yaml
t2iadapter_style_sd14v1.pth t2iadapter_style_sd14v1.yaml

Tips

  • Don't forget to add some negative prompt, default negative prompt in ControlNet repo is "longbody, lowres, bad anatomy, bad hands, missing fingers, extra digit, fewer digits, cropped, worst quality, low quality".
  • Regarding canvas height/width: they are designed for canvas generation. If you want to upload images directly, you can safely ignore them.

Examples

Source Input Output
(no preprocessor)
(no preprocessor)

Adapter Examples

Source Input Output
(no preprocessor)
(no preprocessor)
(no preprocessor)
(no preprocessor)
(clip, non-image)

Examples by catboxanon, no tweaking or cherrypicking. (Color Guidance)

Image Disabled Enabled

Minimum Requirements

  • (Windows) (NVIDIA: Ampere) 4gb - with --xformers enabled, and Low VRAM mode ticked in the UI, goes up to 768x832

CFG Based ControlNet (Experimental)

The original ControlNet applies control to both conditional (cond) and unconditional (uncond) parts. Enabling this option will make the control only apply to the cond part. Some experiments indicate that this approach improves image quality.

To enable this option, tick Enable CFG-Based guidance for ControlNet in the settings.

Note that you need to use a low cfg scale/guidance scale (such as 3-5) and proper weight tuning to get good result.

Guess Mode (Non-Prompt Mode, Experimental)

Guess Mode is CFG Based ControlNet + Exponential decay in weighting.

See issue Mikubill#236 for more details.

Original introduction from controlnet:

The "guess mode" (or called non-prompt mode) will completely unleash all the power of the very powerful ControlNet encoder.

In this mode, you can just remove all prompts, and then the ControlNet encoder will recognize the content of the input control map, like depth map, edge map, scribbles, etc.

This mode is very suitable for comparing different methods to control stable diffusion because the non-prompted generating task is significantly more difficult than prompted task. In this mode, different methods' performance will be very salient.

For this mode, we recommend to use 50 steps and guidance scale between 3 and 5.

Multi-ControlNet / Joint Conditioning (Experimental)

This option allows multiple ControlNet inputs for a single generation. To enable this option, change Multi ControlNet: Max models amount (requires restart) in the settings. Note that you will need to restart the WebUI for changes to take effect.

  • Guess Mode will apply to all ControlNet if any of them are enabled.
Source A Source B Output

Weight and Guidance Strength/Start/End

Weight is the weight of the controlnet "influence". It's analogous to prompt attention/emphasis. E.g. (myprompt: 1.2). Technically, it's the factor by which to multiply the ControlNet outputs before merging them with original SD Unet.

Guidance Start/End is the percentage of total steps the controlnet applies (guidance strength = guidance end). It's analogous to prompt editing/shifting. E.g. [myprompt::0.8] (It applies from the beginning until 80% of total steps)

API/Script Access

This extension can accept txt2img or img2img tasks via API or external extension call. Note that you may need to enable Allow other scripts to control this extension in settings for external calls.

To use the API: start WebUI with argument --api and go to http://webui-address/docs for documents or checkout examples.

To use external extension call: Pass your config to p(pipeline). For more details see scripts/controlnet.py

MacOS Support

Tested with pytorch nightly: Mikubill#143 (comment)

To use this extension with mps and normal pytorch, currently you may need to start WebUI with --no-half.