looxonline/Marlin

Issues

• STL linked is no longer available

  #27 opened 7 months ago by tommylqfree
  0

• BIQU B1 SKR1.4 WITH MICROPROBE V2 FIRMWARE NEEDED BY COMMUNITY!

  #26 opened a year ago by fabianovm
  1

• [FR] (Add in support for M486)

  #25 opened 2 years ago by bkonosky
  0

• [BUG] Z-Home with Probe doesn't work after a print was canceled

  #15 opened 3 years ago by nicedevil007
  1

• Firmware for SKR 2.0?

  #23 opened 2 years ago by huguesdup
  0

• Selecting a diferent mesh doesn't reset the Z height

  #22 opened 3 years ago by JaVelin-X
  0

• fatal error: HAL/LCD_Init.h: No such file or directory

  #21 opened 3 years ago by hellofu
  1

• [FR] Use Z Current for Bed leveling and homing

  #20 opened 3 years ago by stigjoergensen
  0

• [FR] (Support for or how to for SKR V2)

  #19 opened 3 years ago by JaVelin-X
  0

• [BUG] BIQUBX_LATEST branch not working

  #18 opened 3 years ago by digant73
  1

• Z-Homing does not work

  #17 opened 3 years ago by Shaun87
  0

• [BUG] Double X Home needed

  #14 opened 3 years ago by nicedevil007
  2

• [BUG] Bed heater turns off during UBL probing.

  #9 opened 4 years ago by looxonline
  2

• Insane ABL not as effective after FW update

  #11 opened 4 years ago by JaVelin-X
  0

• [BUG] (Smart Filament Sensor false positive)

  #10 opened 4 years ago by JaVelin-X
  0

• TFTFirmware-2020-12-06.zip rename BIGTREE_TFT35_V3.0_E3.26.x.bin to BIGTREE_TFT35_V3.0_B1.26.x.bin

  #7 opened 4 years ago by pixeldoc2000
  4

• Baby steps dont save

  #8 opened 4 years ago by Decoydk
  8

• ABL mesh (on super res) does not test far end of the bed

  #3 opened 4 years ago by DaStivi
  4

• [BUG] Resume print pop up Label issue in french language.

  #5 opened 4 years ago by Ejay-3D
  5

• [FR] Limit z current to prevent large forces if there is a nozzle crash.

  #6 opened 4 years ago by looxonline
  0

• Bad UBL printing

  #4 opened 4 years ago by Klanuk86
  1

• [BUG] Wrong nozzle position when running Z Offset

  #1 opened 4 years ago by Ejay-3D
  7

• [BUG] PID Autotune not working ( result could not be saved )

  #2 opened 4 years ago by Ejay-3D
  2