Bioinformatics one-liners
Useful bash one-liners for useful for bioinformatics.
https://github.com/stephenturner/oneliners
Download the PDF here.
Sources:
- http://gettinggeneticsdone.blogspot.com/2013/10/useful-linux-oneliners-for-bioinformatics.html#comments
- http://sed.sourceforge.net/sed1line.txt
- https://github.com/lh3/seqtk
- http://lh3lh3.users.sourceforge.net/biounix.shtml
- http://genomespot.blogspot.com/2013/08/a-selection-of-useful-bash-one-liners.html
- http://biowize.wordpress.com/2012/06/15/command-line-magic-for-your-gene-annotations/
- http://genomics-array.blogspot.com/2010/11/some-unixperl-oneliners-for.html
- http://bioexpressblog.wordpress.com/2013/04/05/split-multi-fasta-sequence-file/
Basic awk & sed
Extract fields 2, 4, and 5 from file.txt:
awk '{print $2,$4,$5}' input.txt
Print each line where the 5th field is equal to ‘abc123’:
awk '$5 == "abc123"' file.txt
Print each line where the 5th field is not equal to ‘abc123’:
awk '$5 != "abc123"' file.txt
Print each line whose 7th field matches the regular expression:
awk '$7 ~ /^[a-f]/' file.txt
Print each line whose 7th field does not match the regular expression:
awk '$7 !~ /^[a-f]/' file.txt
Get unique entries in file.txt based on column 1 (takes only the first instance):
awk '!arr[$2]++' file.txt
Print rows where column 3 is larger than column 5 in file.txt:
awk '$3>$5' file.txt
Sum column 1 of file.txt:
awk '{sum+=$1} END {print sum}' file.txt
Compute the mean of column 2:
awk '{x+=$2}END{print x/NR}' file.txt
Number each line in file.txt:
sed = file.txt | sed 'N;s/\n/ /'
Replace all occurances of foo
with bar
in file.txt:
sed 's/foo/bar/g' file.txt
Trim leading whitespace in file.txt:
sed 's/^[ \t]*//' file.txt
Trim trailing whitespace in file.txt:
sed 's/[ \t]*$//' file.txt
Trim leading and trailing whitespace in file.txt:
sed 's/^[ \t]*//;s/[ \t]*$//' file.txt
Delete blank lines in file.txt:
sed '/^$/d' file.txt
awk & sed for bioinformatics
Returns all lines on Chr 1 between 1MB and 2MB in file.txt. (assumes) chromosome in column 1 and position in column 3 (this same concept can be used to return only variants that above specific allele frequencies):
cat file.txt | awk '$1=="1"' | awk '$3>=1000000' | awk '$3<=2000000'
Basic sequence statistics. Print total number of reads, total number unique reads, percentage of unique reads, most abundant sequence, its frequency, and percentage of total in file.fq:
cat myfile.fq | awk '((NR-2)%4==0){read=$1;total++;count[read]++}END{for(read in count){if(!max||count[read]>max) {max=count[read];maxRead=read};if(count[read]==1){unique++}};print total,unique,unique*100/total,maxRead,count[maxRead],count[maxRead]*100/total}'
Convert .bam back to .fastq:
samtools view file.bam | awk 'BEGIN {FS="\t"} {print "@" $1 "\n" $10 "\n+\n" $11}' > file.fq
Keep only top bit scores in blast hits (best bit score only):
awk '{ if(!x[$1]++) {print $0; bitscore=($14-1)} else { if($14>bitscore) print $0} }' blastout.txt
Keep only top bit scores in blast hits (5 less than the top):
awk '{ if(!x[$1]++) {print $0; bitscore=($14-6)} else { if($14>bitscore) print $0} }' blastout.txt
Split a multi-FASTA file into individual FASTA files:
awk '/^>/{s=++d".fa"} {print > s}' multi.fa
Convert a FASTQ file to FASTA:
sed -n '1~4s/^@/>/p;2~4p' file.fq > file.fa
Extract every 4th line starting at the second line (extract the sequence from FASTQ file):
sed -n '2~4p' file.fq
sort, uniq, cut, etc.
Count the number of unique lines in file.txt
cat file.txt | sort | uniq | wc -l
Find number of lines shared by 2 files:
sort file1 file2 | uniq -d
Sort numerically (with logs) (g) by column (k) 9:
sort -gk9 file.txt
Find the most common strings in column 2:
cut -f2 file.txt | sort | uniq -c | sort -k1nr | head
Pick 10 random lines from a file:
shuf file.txt | head -n 10
Print all possible 3mer DNA sequence combinations:
echo {A,C,T,G}{A,C,T,G}{A,C,T,G}
Untangle an interleaved paired-end FASTQ file. If a FASTQ file has paired-end reads intermingled, and you want to separate them into separate /1 and /2 files, and assuming the /1 reads precede the /2 reads:
cat interleaved.fq |paste - - - - - - - - | tee >(cut -f 1-4 | tr "\t" "\n" > deinterleaved_1.fq) | cut -f 5-8 | tr "\t" "\n" > deinterleaved_2.fq
find, xargs, and GNU parallel
Download GNU parallel at https://www.gnu.org/software/parallel/.
Search for .bam files anywhere in the current directory recursively:
find . -name "*.bam"
Delete all .bam files:
find . -name "*.bam" | xargs rm
Rename all .txt files to .bak (backup *.txt before doing something else to them, for example):
find . -name "*.txt" | sed "s/\.txt$//" | xargs -i echo mv {}.txt {}.bak | sh
Chastity filter raw Illumina data (grep reads containing :N:
, append (-A) the three lines after the match containing the sequence and quality info, and write a new filtered fastq file):
find *fq | parallel "cat {} | grep -A 3 '^@.*[^:]*:N:[^:]*:' | grep -v '^\-\-$' > {}.filt.fq"
Run FASTQC in parallel 12 jobs at a time:
find *.fq | parallel -j 12 "fastqc {} --outdir ."
Index your bam files in parallel, but only echo the commands (--dry-run
) rather than actually running them:
find *.bam | parallel --dry-run 'samtools index {}'
seqtk
Download seqtk at https://github.com/lh3/seqtk. Seqtk is a fast and lightweight tool for processing sequences in the FASTA or FASTQ format. It seamlessly parses both FASTA and FASTQ files which can also be optionally compressed by gzip.
Convert FASTQ to FASTA:
seqtk seq -a in.fq.gz > out.fa
Convert ILLUMINA 1.3+ FASTQ to FASTA and mask bases with quality lower than 20 to lowercases (the 1st command line) or to N
(the 2nd):
seqtk seq -aQ64 -q20 in.fq > out.fa
seqtk seq -aQ64 -q20 -n N in.fq > out.fa
Fold long FASTA/Q lines and remove FASTA/Q comments:
seqtk seq -Cl60 in.fa > out.fa
Convert multi-line FASTQ to 4-line FASTQ:
seqtk seq -l0 in.fq > out.fq
Reverse complement FASTA/Q:
seqtk seq -r in.fq > out.fq
Extract sequences with names in file name.lst
, one sequence name per line:
seqtk subseq in.fq name.lst > out.fq
Extract sequences in regions contained in file reg.bed
:
seqtk subseq in.fa reg.bed > out.fa
Mask regions in reg.bed
to lowercases:
seqtk seq -M reg.bed in.fa > out.fa
Subsample 10000 read pairs from two large paired FASTQ files (remember to use the same random seed to keep pairing):
seqtk sample -s100 read1.fq 10000 > sub1.fq
seqtk sample -s100 read2.fq 10000 > sub2.fq
Trim low-quality bases from both ends using the Phred algorithm:
seqtk trimfq in.fq > out.fq
Trim 5bp from the left end of each read and 10bp from the right end:
seqtk trimfq -b 5 -e 10 in.fa > out.fa
Untangle an interleaved paired-end FASTQ file. If a FASTQ file has paired-end reads intermingled, and you want to separate them into separate /1 and /2 files, and assuming the /1 reads precede the /2 reads:
seqtk seq -l0 -1 interleaved.fq > deinterleaved_1.fq
seqtk seq -l0 -2 interleaved.fq > deinterleaved_2.fq
GFF3 Annotations
Print all sequences annotated in a GFF3 file.
cut -s -f 1,9 yourannots.gff3 | grep $'\t' | cut -f 1 | sort | uniq
Determine all feature types annotated in a GFF3 file.
grep -v '^#' yourannots.gff3 | cut -s -f 3 | sort | uniq
Determine the number of genes annotated in a GFF3 file.
grep -c $'\tgene\t' yourannots.gff3
Extract all gene IDs from a GFF3 file.
grep $'\tgene\t' yourannots.gff3 | perl -ne '/ID=([^;]+)/ and printf("%s\n", $1)'
Print length of each gene in a GFF3 file.
grep $'\tgene\t' yourannots.gff3 | cut -s -f 4,5 | perl -ne '@v = split(/\t/); printf("%d\n", $v[1] - $v[0] + 1)'
FASTA header lines to GFF format (assuming the length is in the header as an appended "_length" as in Velvet assembled transcripts):
grep '>' file.fasta | awk -F "_" 'BEGIN{i=1; print "##gff-version 3"}{ print $0"\t BLAT\tEXON\t1\t"$10"\t95\t+\t.\tgene_id="$0";transcript_id=Transcript_"i;i++ }' > file.gff
Other generally useful aliases for your .bashrc
Get a prompt that looks like user@hostname:/full/path/cwd/:$
export PS1="\u@\h:\w\\$ "
Never type cd ../../..
again (or use autojump, which enables you to navigate the filesystem faster):
alias ..='cd ..'
alias ...='cd ../../'
alias ....='cd ../../../'
alias .....='cd ../../../../'
alias ......='cd ../../../../../'
Ask before removing or overwriting files:
alias mv="mv -i"
alias cp="cp -i"
alias rm="rm -i"
My favorite ls
aliases:
alias ls="ls -1p --color=auto"
alias l="ls -lhGgo"
alias ll="ls -lh"
alias la="ls -lhGgoA"
alias lt="ls -lhGgotr"
alias lS="ls -lhGgoSr"
alias l.="ls -lhGgod .*"
alias lhead="ls -lhGgo | head"
alias ltail="ls -lhGgo | tail"
alias lmore='ls -lhGgo | more'
Use cut
on space- or comma- delimited files:
alias cuts="cut -d \" \""
alias cutc="cut -d \",\""
Pack and unpack tar.gz files:
alias tarup="tar -zcf"
alias tardown="tar -zxf"
Or use a generalized extract
function:
# as suggested by Mendel Cooper in "Advanced Bash Scripting Guide"
extract () {
if [ -f $1 ] ; then
case $1 in
*.tar.bz2) tar xvjf $1 ;;
*.tar.gz) tar xvzf $1 ;;
*.tar.xz) tar Jxvf $1 ;;
*.bz2) bunzip2 $1 ;;
*.rar) unrar x $1 ;;
*.gz) gunzip $1 ;;
*.tar) tar xvf $1 ;;
*.tbz2) tar xvjf $1 ;;
*.tgz) tar xvzf $1 ;;
*.zip) unzip $1 ;;
*.Z) uncompress $1 ;;
*.7z) 7z x $1 ;;
*) echo "don't know how to extract '$1'..." ;;
esac
else
echo "'$1' is not a valid file!"
fi
}
Use mcd
to create a directory and cd
to it simultaneously:
function mcd { mkdir -p "$1" && cd "$1";}
Go up to the parent directory and list it's contents:
alias u="cd ..;ls"
Make grep pretty:
alias grep="grep --color=auto"
Refresh your .bashrc
:
alias refresh="source ~/.bashrc"
Common typos:
alias mf="mv -i"
alias mroe="more"
alias c='clear'