/lsp-plugins

Linux Studio Plugins Project

Primary LanguageMakefileGNU Lesser General Public License v3.0LGPL-3.0

ABOUT

LSP (Linux Studio Plugins) is a collection of open-source plugins currently compatible with CLAP, LADSPA, LV2, VST2/LinuxVST, VST3 and JACK standalone formats.

The basic idea is to fill the lack of good and useful plugins under the GNU/Linux platform.

After some contributions to other open source projects the decision was made to implement separate and independent plugin distribution.

All supplementary information you will find on official web site: https://lsp-plug.in/

Note that after 1.2.0 release the lsp-plugins repository was decomposed into multiple subprojects. As a result, it is the repository without any code and for build purposes it gathers source code as dependencies from another repositories which are located here: https://github.com/lsp-plugins/

LICENSING

The LSP project is an open-source project and cares about quality of developed software.

Still there is no absolute warranty about stability of the software on different platforms so you're using this software on your own risk.

The project also does encourage donations that can be submitted here:

Licensed under the terms of GNU Lesser Public License v3 (LGPLv3):

For more information about licensing, please read COPYING and COPYING.LESSER.

SYSTEM REQUIREMENTS

Current matrix of hardware architecture and platform (OS) support is:

  ┌───────────┬───────────┬─────────┬─────────┐
  │Arch / OS  │ GNU/Linux │ FreeBSD │ Windows │
  ╞═══════════╪═══════════╪═════════╪═════════╡
  │aarch64    │     F     │    E    │    U    │
  ├───────────┼───────────┼─────────┼─────────┤
  │armv5t     │     C     │    C    │    U    │
  ├───────────┼───────────┼─────────┼─────────┤
  │armv6-a    │     E     │    E    │    U    │
  ├───────────┼───────────┼─────────┼─────────┤
  │armv7-ar   │     E     │    E    │    U    │
  ├───────────┼───────────┼─────────┼─────────┤
  │i586       │     F     │    E    │    E    │
  ├───────────┼───────────┼─────────┼─────────┤
  │loongarch32│     C     │    U    │    U    │
  ├───────────┼───────────┼─────────┼─────────┤
  │loongarch64│     C     │    U    │    U    │
  ├───────────┼───────────┼─────────┼─────────┤
  │ppc64      │     C     │    U    │    U    │
  ├───────────┼───────────┼─────────┼─────────┤
  │riscv-64   │     C     │    U    │    U    │
  ├───────────┼───────────┼─────────┼─────────┤
  │s390x      │     C     │    U    │    U    │
  ├───────────┼───────────┼─────────┼─────────┤
  │x86_64     │     F     │    E    │    E    │
  └───────────┴───────────┴─────────┴─────────┘

The table legend is the following:

  • F - Full support.
  • C - The code does compile, not enough knowledge about it's correct work.
  • E - Experimental support, not enough feedback from users.
  • U - Unknown, the code may be built but the correctness of it's work has not been tested.
  • N - No support, the code may compile but the work has not been tested.

Note that minimum supported Windows version is Windows Vista.

Supported plugin formats:

  • CLAP (full support);
  • GStreamer (experimental support);
  • JACK standalone (full support)
  • LADSPA (partial support: not supported by plugins that use MIDI or file loading due to LADSPA plugin format restrictions);
  • LV2 (full support);
  • VST2/LinuxVST (full support);
  • VST3 (full support).

The Linux distribution requirements:

  • glibc >= 2.19
  • libsndfile >= 1.0.25
  • libcairo >= 1.14
  • libfreetype >= 2.10
  • libGL

Known list of supported plugin hosts:

  • Ardour
  • Bitwig Studio
  • Carla
  • Mixbus
  • Qtractor
  • Reaper
  • Renoise
  • Tracktion

VERSIONING

Binary releases contain all possible plugins in one bundle. The binaries are packaged into archive named according to the following format:

  lsp-plugins-<format>-<major>.<minor>.<micro>-<platform>-<arch>.tar.gz

The property is the format of plugins, currently available:

  • clap - plugins in CLAP format;
  • doc - documentation;
  • gst - plugins in GStreamer format;
  • jack - standalone version of plugins that require JACK server for execution;
  • ladspa - plugins in LADSPA format (not all plugins due to format's restriction);
  • lv2 - plugins in LV2 format;
  • src - source code;
  • vst2 - plugins in VST 2.4 format;
  • vst3 - plugins in VST3 format.

Property 'arch' contains short name of architecture the binaries are build for. Properties 'major', 'minor' and 'micro' form the version of release. If the version is odd, it contains mostly bug-fixes and patches for the plugin modules. The even 'micro' version of plugins contains new features and, in most cases, new plugin series. The history of changes may be seen in attached CHANGELOG.txt.

Source code is also ready for building, see 'BUILDING' section for details.

INSTALLATION

Binary distributions are ready to launch, just copy them to the appropriate directory.

Releases containing odd number in minor version provide only enhancements and critical fixes for the previous release.

IMPORTANT FOR VST INSTALLATIONS: If you deploy plugins as a subdirectory of your VST2 directory, the subdirectory should contain substring 'lsp-plugins'. Otherwise plugins won't find the VST2 core library. Please notice that '~' means user's home directory.

For Linux/FreeBSD

The usual directories for CLAP are:

  • /usr/lib/clap
  • /usr/local/lib/clap
  • /usr/lib64/clap
  • /usr/local/lib64/clap
  • ~/.clap

The usual directories for JACK core library are:

  • /usr/lib
  • /usr/local/lib
  • /lib
  • /usr/lib64
  • /usr/local/lib64
  • /lib64

The usual directories for JACK binaries are:

  • /usr/bin
  • /usr/local/bin
  • /bin
  • /usr/sbin
  • /usr/local/sbin
  • /sbin

The usual directories for GStreamer core library:

  • /usr/lib
  • /usr/local/lib
  • /lib
  • /usr/lib64
  • /usr/local/lib64
  • /lib64

The usual installation directory for GStreamer plugins can be obtained by the following command:

pkg-config --variable=pluginsdir gstreamer-1.0

The usual directories are the following:

  • /usr/lib64/gstreamer-1.0
  • /usr/lib/gstreamer-1.0
  • /usr/local/lib64/gstreamer-1.0
  • /usr/local/lib/gstreamer-1.0

The usual directories for LADSPA are:

  • /usr/lib/ladspa
  • /usr/local/lib/ladspa
  • /usr/lib64/ladspa
  • /usr/local/lib64/ladspa
  • ~/.ladspa

The usual directories for LV2 are:

  • /usr/lib/lv2
  • /usr/local/lib/lv2
  • /usr/lib64/lv2
  • /usr/local/lib64/lv2
  • ~/.lv2

The usual directories for VST 2.x/LinuxVST are:

  • /usr/lib/vst
  • /usr/local/lib/vst
  • /usr/lib64/vst
  • /usr/local/lib64/vst
  • ~/.lxvst
  • ~/.vst

The usual directories for VST 3.x are:

  • /usr/lib/vst3
  • /usr/local/lib/vst3
  • /usr/lib64/vst3
  • /usr/local/lib64/vst3
  • ~/.vst3

For Windows

The usual directory for LV2 binaries is:

  • C:\Program Files\Common Files\LV2

The usual directory for VST2 binaries is:

  • C:\Program Files\Common Files\VST

The usual directory for VST3 binaries is:

  • C:\Program Files\Common Files\VST3
  • C:\Program Files (x86)\Common Files\VST3 - for 32-bit plugins on 64-bit Windows.

The usual directory for CLAP binaries is:

  • C:\Program Files\Common Files\CLAP

BUILDING

You may build plugins from scratch.

The build process doesn't differ much for GNU/Linux, FreeBSD or Windows. Build of JACK standalone versions for Windows is yet not supported.

For successful build for Linux/FreeBSD you need the following packages to be installed:

  • gcc >= 4.7 OR clang >= 10.0.1
  • gcc-c++ >= 4.7 OR clang-c++ >= 10.0.1
  • libgcc_s1 >= 5.2
  • libstdc++-devel >= 4.7
  • libsndfile-devel >= 1.0.25
  • libcairo-devel >= 1.14
  • php >= 5.5.14 (for documentation)
  • jack-devel >= 1.9.5 (for JACK)
  • libiconv (for FreeBSD)
  • libGL-devel >= 11.2.2
  • gstreamer >= 1.20 (for GStreamer)
  • gstreamer-plugins-base >= 1.20 (for GStreamer)

For Windows build, the following software needs to be installed:

  • MinGW/MinGW-W64 >= 7.0
  • Git >= 2.8 (optional)
  • PHP >= 5.5.14
  • GNU Make >= 4.2

To perform toolchain setup for Windows, you may perform the following steps:

To build the project from archive with source code, the following sequence of commands should be performed:

  make clean
  make config
  make
  make install

To build the project from GIT repository, the additional 'make fetch' command should be issued to obtain all source code dependencies:

  make clean
  make config
  make fetch
  make
  make install

For Windows, the make install command creates 'INSTALL' subdirectory and places the plugin content into desired subfolders.

By default, all supported formats of plugins for the target platform are built. The list of modules for build can be adjusted by specifying FEATURES variable at the configuration stage:

  make config FEATURES='lv2 vst2 ui doc'

Available options are:

  • clap - CLAP plugin binaries;
  • doc - HTML documentation;
  • gst - GStreamer plugin binaries;
  • jack - JACK plugin binaries (not available under Windows);
  • ladspa - LADSPA plugin binaries;
  • lv2 - LV2 plugin binaries;
  • ui - build plugins wih UI support;
  • vst2 - VST2/LinuxVST plugin binaries;
  • vst3 - VST2 plugin binaries;
  • xdg - the X11 desktop integration icons (not necessary for Windows).

By default plugins use '/usr/local' path as a target directory for installation. To override this path, the PREFIX variable can be overridden:

  make config PREFIX=/usr

To build binaries for debugging, use the following commands:

  make config DEBUG=1

To build binaries for testing (developers only), use the following commands:

  make config TEST=1

To install plugins at the desired root directory, the DESTDIR variable can be specified:

  make install DESTDIR=<installation-root>

To install only specific formats, use INSTALL_FEATURES option:

  make install FEATURES=lv2

To build standalone source code package, the following commands can be issued:

  make config
  make distsrc

After that, a stanalone archive with source code will be created in the .build directory.

When cross compiling, the AS, AR, CC, CXX, LD, etc. variables should be set in the environment according to the target/cross compile toolchain. The build host machine versions of those variables- HOST_AS, HOST_AR, HOST_CC, HOST_CXX, etc. have defaults set in the makefiles but may need to be overridden. To troubleshoot, run make configure with the VERBOSE option. Additional variables should be configured:

  • set the ARCHITECTURE option to the target architecture
  • set the CROSS_COMPILE option to 1

Example cross compile procedure for aarch64 target on x86_64 build host:

  make clean
  make config ARCHITECTURE="aarch64" CROSS_COMPILE="1"
  make fetch
  make
  make install

After successful completion, the cross compiled artifacts should be located in the directory specified by PREFIX.

For more build options, issue:

  make help

DEBUGGING

For debugging and getting crash stack trace with Ardour, please follow these steps:

  • Open console
  • Run ardour from console with --gdb option
  • After gdb starts, issue 'run' command
  • Do usual stuff to reproduce the problem
  • After Ardour crashes, type 'thread apply all bt' in console and attach the output to the bug report.

KNOWN PROBLEMS

unclutter

People using the unclutter tool reported spontaneous freeze of the UI for LSP Plugins. The unclutter tool is pretty rare and has not been updated over the years. So it does not follow the latest changes made for X.Org. The problem can be solved by switching to unclutter-xfixes tool which works pretty OK with LSP UI.

gstreamer

There is no good support of MIDI interface in GStreamer now. Even if MIDI-based plugins are available for GStreamer, there is no guarantee that they will fully work.

Wayland and XWayland

LSP Plugins don't support Wayland protocol at this moment and are required to run under XWayland if Wayland is used as a system compositor. The implementation of XWayland is still imperfect and there are known cases where it can cause several problems with graphics.

There are several reasons why LSP Plugins don't support Wayland at this moment:

  • It's a new protocol, and adding it's support requires some time;
  • It provides some backward compatibility with X11, and the lack of Wayland support is not so critical;
  • Only few plugin formats and DAWs support Wayland at this moment. CLAP is the only known plugin format that supports Wayland and the Presonus Studio for Linux is the only DAW that requires Wayland as a must.

If you meet problems using LSP Plugins with Wayland, please consider switching back to X11.

3D backend not working

This is the typical problem of interacting of the GUI with additional library that performs 3D rendering. The reason can be:

  • the library is missing in standard system libraries or nearby the plugin's binareis.
  • the provided version of the library does not matched the required one by the UI.

The short way to diagnose that the library was not found or not accepted by the UI is just to visit the MENU -> 3D rendering (visible only for plugins that use 3D rendering) and ensure that there are no available items in the submenu.

To solve the problem, you need:

  • ensure that the liblsp-r3d-glx library is present in /usr/lib or in /usr/local/lib system paths OR:
  • ensure that the liblsp-r3d-glx library is placed nearby the plugin's binaries if you have some custom installation of the bundle (for example, in your HOME directory);
  • ensure that the version of the liblsp-r3d-glx is matching to installed binaries;
  • install the proper version of the library to the usual place if at least one of the checks above were not fulfilled.

TESTING

Since release 1.1.4 there is implemented testing subsystem that allows:

  • perform manual tests (mtest module);
  • perform automated unit testing (utest module);
  • perform automated single-core performance testing (ptest module).

Manual tests are semi-automated or not automated at all. You may launch these tests to perform manual interaction with system or for retrieving some text data for further processing.

Unit tests are completely automated and check that the produced result is correct for the specific input data. By default unit tests are launched in separate processes and utilize all CPU cores for maximum performance. The status of each unit test is collected during execution and list of all failed tests are printed after completion.

Performance tests measure performance of some function/module under different conditions, gather final statistics and output them in a table format. These tests are very useful for measuring single-core performance of different modules and functions and performing code optimizations.

To build testing subsystem, issue the following commands: make clean make config TEST=1 make

After build, we can launch the test binary by issuing command: .build/host/lsp-plugin-fw/lsp-plugins-test

This binary provides simple command-line interface, so here's the full usage:
USAGE: {utest|ptest|mtest} [args...] [test name...] First argument: utest Unit testing subsystem ptest Performance testing subsystem mtest Manual testing subsystem Additional arguments: -a, --args [args...] Pass arguments to test -d, --debug Disable time restrictions for unit tests for debugging purposes -e, --execute Launch tests specified after this switch -f, --fork Fork child processes (opposite to --nofork) -h, --help Display help -i, --ignore Ignore tests specified after this switch -j, --jobs Set number of job workers for unit tests -l, --list List all available tests -mt, --mtrace Enable mtrace log -nf, --nofork Do not fork child processes (for better debugging capabilities) -nt, --nomtrace Disable mtrace log -o, --outfile file Output performance test statistics to specified file -s, --silent Do not output additional information from tests -t, --tracepath path Override default trace path with specified value -v, --verbose Output additional information from tests

Each test has fully-qualified name separated by dot symbols, tests from different test spaces (utest, ptest, mtest) may have similar fully-qualified names.

To obtain a list of all unit tests we can issue: .build/host/lsp-plugin-fw/lsp-plugins-test utest --list

And then we can launch all complex number processing unit tests and additionally 'dsp.mix' unit test: .build/host/lsp-plugin-fw/lsp-plugins-test utest dsp.complex.* dsp.pcomplex.* dsp.mix

If we don's specify any unit test name in argument, then all available unit tests will be launched.

To start debugging of some unit test, you need to pass additional arguments: .build/host/lsp-plugin-fw/lsp-plugins-test/lsp-plugins-test utest --nofork --debug --verbose

Because unit tests are short-time fully-automated tests, they are parallelized and executed by default by number_of_cores*2 processes. To disable this, we specify option --nofork. Also, unit test execution time is limited by 5 seconds by default, so when debugging, our tests will be killed. That's why we specify --debug option to disable time control. Option --verbose allows to output additional information by the unit test that is turned off by default.

We also can use performance tests to obtain full performance profile of target machine. Because performance tests in most cases take much time for gathering statistics, the final statistics for each test can be saved in a separate file by specifying --outfile option: .build/host/lsp-plugin-fw/lsp-plugins-test ptest -o performance-test.log

Manual tests are mostly designed for developers' purposes.

SAST TOOLS

The Code of the project has been verified by the following SAST tools:

  • PVS-Studio - static analyzer for C, C++, C#, and Java code.

TROUBLESHOOTING

Because there are many GNU/Linux distributions and software configurations, and, possible, internal bugs, plugins may have bad performance or even crash. The good way to find the solutiong is to submit a bug or crash report. This section describes the way to give detailed information to developers.

To submit a good bug or crash report, you should answer these questions:

  • Did you use the previous version of plugins? If yes, did they properly work and have you properly uninstalled the previous version?
  • What version of plugins caused a crash? Was it LV2, LinuxVST, LADSPA or standalone package?
  • Did you try standalone version of plugins? Did they crash, too?
  • What CPU and memory configuration do you use? This can be done by issuing 'cat /proc/cpuinfo' and 'free' commands.
  • What Linux distribution do you use? This may be done by issuing 'uname -a' and 'cat /etc/issue' commands.
  • What version of required (see 'INSTALLATION') packages are present in your system?
  • Provide the full list (besides LSP Plugins) of plugins that you used in your host.
  • If possible, provide the stack trace of the crash, given by GDB. See 'PROFILING / DEBUGGING' section for details.
  • If plugins have serious performance regression, please provide profiling file. See 'PROFILING / DEBUGGING' section for details.
  • If the plugin behaves incorrectly, there is also good reason to provide the dump of internal state of the plugin which can be performed by selectecting the 'Dump for debug' menu item from the main menu. The internal state of the plugin will be saved into the 'test-dumps' subdirectory of the system temporary directory.

CONTACTS

There is possible to submit feature requests and bugs on the GitHub.com page of the project: https://github.com/sadko4u/lsp-plugins/issues

Sourceforge.net page of the project: https://sourceforge.net/p/lsp-plugins/tickets/

You may contact us on the special feedback page: https://lsp-plug.in/?page=feedback

Hope you have enjoyed our work!