irrighino is a complete watering system based on Arduino Yun http://www.lucadentella.it/en/2015/08/04/irrighino/
As Arduino Yun is discontinued, I modified this project to be compatible with Raspberry Pi. Please welcome irrighino Pi!
If you're using a new Arduino Yun Rev.2 or a Yun Shield, follow the steps in the following post to prepare the board for Irrighino: http://www.lucadentella.it/en/2019/02/02/irrighino-e-yun-rev-2/
An Arduino Yun with the latest firmware and the following modules (you can install them using opkg or through the web interface):
- php5
- php5-cgi
- php5-cli
- php5-mod-curl
- php5-mod-json
- php5-mod-pdo
- php5-mod-pdo-sqlite
- zoneinfo-core
- zoneinfo-europe
The Yun webserver (uhttpd) must be configured to execute php scripts, as explained here: http://www.lucadentella.it/en/2013/12/05/yun-utilizzare-php/
Upload the sketch to the Yun. Copy all the files in the "website" folder to the Yun SD card, in a new folder named "irrighino".
Add the following 3 lines to the crontab ("crontab -e" or through the web interface):
* * * * * /usr/bin/php-cli /www/sd/irrighino/php/irrighinoTask.php
05 00 * * * /usr/bin/php-cli /www/sd/irrighino/php/purgeOldEvents.php
10 00 * * * /usr/bin/php-cli /www/sd/irrighino/php/purgeOldLogs.php
Create the log folder (/var/log/irrighino/)
If you changed the default Yun password ("arduino"), update the include.php file accordingly.
Connect to http://'yun-ip'/sd/irrighino
Edit the include.php file to change the number of outputs, their names and colors. Edit the config.h file to change the PINs led, switches, outputs are connected to.