EFI for Intel Desktop 12600K - Opencore 0.9.5 - Z690M AORUS ELITE DDR4 - macOS Sonoma 14.1 - AMD RX 5500XT
Note | Description |
---|---|
macOS | Sonoma 14.1 |
Motherboard | Gigabyte Z690M AORUS ELITE DDR4 |
GPU | AMD RX 5500XT |
Processor | Intel® Core™ i5-12600K |
NVME SSD | XPG S41 TUF 512Gb |
RAM | 2x XPG Gammix D45 8Gb 3600Mhz DDR4 |
Wifi/Bluetooth | WIFI 6E FENVI FV-AXE3000RGB - AX210 - Bluetooth 5.2 |
Ethernet | Intel® I225-V 2.5GbE LAN |
SMBIOS | iMacPro1,1 |
- Opencore version: 0.9.5
- Generate and complete your SMBIOS infos - ALWAYS;
- Adjust your BIOS;
- Install macOS and enjoy :)
- Rempap USB ports (if needed) - ALWAYS;
Update config.plist in PlatformInfo > Generic with YOUR informations.
1. MLB (Board Serial)
2. ROM (Mac Address)
3. SystemSerialNumber (Serial)
4. SystemUUID (SmUUID)
Please use genSMBIOS for generate values for above itens.
Please use ProperTree for configure/edit your config.plist.
SMBIOS | Description |
---|---|
MacPro7,1 | Because GPU integrated in 12th gen without support for Apple. |
iMacPro1,1 | Because GPU integrated in 12th gen without support for Apple. |
- Fast Boot
- Secure Boot
- Serial/COM Port
- Parallel Port
- VT-d (can be enabled if you set
DisableIoMapper
to YES) - Compatibility Support Module (CSM).
- Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)
- Intel SGX
- Intel Platform Trust
- CFG Lock (MSR 0xE2 write protection)
- This must be off, if you can't find the option then
ENABLE
AppleXcpmCfgLock
. - Your hack will not boot with
CFG-Lock
enabled.
- This must be off, if you can't find the option then
- VT-x
- Above 4G decoding.
- This must be on, if you can't find the option then add
npci=0x2000
toboot-args
. - Do not have both this option and
npci
onboot-args
enabled at the same time. - When enabling Above4G, Resizable BAR Support may become an available on some motherboards. Please ensure this is
DISABLED
instead of set to Auto.
- This must be on, if you can't find the option then add
- Hyper-Threading
- Execute Disable Bit
- EHCI/XHCI Hand-off
- OS type: Windows 8.1/10 UEFI Mode
- SATA Mode: AHCI