/meishi

This is my business card, as well as a QMK powered macro keyboard.

Meishi

This is my business card, as well as a QMK powered macro keyboard.

Parts Needed

  • 1 PCB
  • 1 Pro Micro (or compatible controller)
  • 2 Pro Micro standoffs (usually included when buying a Pro Micro)
  • 4 MX switches
  • 4 MX keycaps
  • 4 rubber feet (optional)

Build

Solder the Pro Micro face down onto the PCB with standoffs.

Solder the MX switches.

Firmware

The card uses QMK as the firmware. To setup QMK, please referee to the QMK Docs

The pinout is the same as Biacco42/meishi. It can be flashed with the same configuration.

make meishi:default:avrdude

To reset the Pro Micro, short the RESET pin to ground.