This repository contains sample code for the Sonatino audio development board.
Documentation for Sonatino can be found here.
Note: For board revisions prior to 3.x.x, use the examples in the v2.x.x folder. Your revision number can be found on the bottom side of the board.
| Name | Environment | Description |
|---|---|---|
| playback | Arduino IDE | Demonstrates how to play an MP3 file |
| processing | Arduino IDE | Demonstrates real-time audio processing with a basic reverb effect |
| recording | Arduino IDE | Demonstrates recording audio to a microSD card |
| streaming | PlatformIO | Demonstrates receiving an audio stream over WiFi |
Each example project is designed to run in a specific environment. The following instructions will guide you through running the examples in the respective environments.
-
Arduino IDE Projects
- To run an example, open the
.inofile with Arduino IDE, connect Sonatino using a USB-C cable, and press Upload. - Note: You'll need to first install Arduino-ESP32 and the ESP8266Audio library if you haven't already done so.
- To run an example, open the
-
PlatformIO Projects
- Open the folder containing the example in PlatformIO, and it should install the necessary libraries and platform (espressif32). Connect Sonatino using a USB-C cable, then build and upload the project.
For more information, refer to the Getting Started section of the Sonatino documentation.