[Jetson] *** No rule to make target 'arch/aarch64/Makefile'. Stop.
ArciAndres opened this issue · 7 comments
Hello!
I am trying to install the ASUS AX1800 WiFi adapter in an Nvidia Jetson Xavier NX developer card. It has the following specs:
Architecture: AARCH64
Kernel: 5.10.104-tegra.
Operative system: Ubuntu 20.04 (focal)
I am encountering the following error when executing the make
command:
ubuntu@ubuntu:~/drivers/rtl8852au$ make
#rm -f .symvers.8852au
make ARCH=aarch64 CROSS_COMPILE= -C /lib/modules/5.10.104-tegra/build M=/home/leolabs/drivers/rtl8852au modules
make[1]: Entering directory '/usr/src/linux-headers-5.10.104-tegra-ubuntu20.04_aarch64/kernel-5.10'
Makefile:712: arch/aarch64/Makefile: No such file or directory
make[1]: *** No rule to make target 'arch/aarch64/Makefile'. Stop.
make[1]: Leaving directory '/usr/src/linux-headers-5.10.104-tegra-ubuntu20.04_aarch64/kernel-5.10'
make: *** [Makefile:638: modules] Error 2
It might be related to this issue.
Any advice is highly appreciated.
Thank you in advance.
Sorry, it is not related to your reference. There is code in the Makefile that is supposed to turn aarch64 to arm64, which is where the headers are found.
Please run the command 'uname -m' and post the result.
The output of the uname -m
command is: aarch64
I think that you do not have the latest version of the code. So a 'git pull' and try again. Did that help?
One other test - run the following command:
uname -m | sed -e "s/i.86/i386/; s/ppc.*/powerpc/; s/armv.l/arm/; s/aarch64/arm64/;"
and report the output. That will test your copy of sed.
I am also get this Error
radxa@rock-5a:~/Downloads/rtl8852au$ make
make ARCH=aarch64 CROSS_COMPILE= -C /lib/modules/5.10.110-6-rockchip/build M=/home/radxa/Downloads/rtl8852au modules
make[1]: Entering directory '/usr/src/linux-headers-5.10.110-6-rockchip'
Makefile:708: arch/aarch64/Makefile: No such file or directory
make[1]: *** No rule to make target 'arch/aarch64/Makefile'. Stop.
make[1]: Leaving directory '/usr/src/linux-headers-5.10.110-6-rockchip'
make: *** [Makefile:636: modules] Error 2
radxa@rock-5a:~/Downloads/rtl8852au$ uname -m
aarch64
radxa@rock-5a:~/Downloads/rtl8852au$ uname -m | sed -e "s/i.86/i386/; s/ppc.*/powerpc/; s/armv.l/arm/; s/aarch64/arm64/;"
arm64
Line 26 of the Makefile sets the SUBARCH using the statement that you ran above. Does your version of Makefile do that?
If it does not, then your code version does not match mine. What happens when you do a 'git pull'?
You have screwed up your local copy of the repository. Delete the current code and redo the clone command. It should be OK then.