Issues
- 0
- 6
Rocky Linux 9.4 - "Unknown symbol in module, or unknown parameter (see dmesg)" Observed After sudo modprobe 8852au
#94 opened by metalllinux - 0
- 3
- 12
No driver for TP-Link AX1800/Archer TX20U
#91 opened by nukul4r - 4
- 1
- 3
module not working on 6.8.1 kernel
#88 opened by drjakub - 2
- 7
Build on openSUSE kernel:stable
#87 opened by Sauerlandlinux - 0
- 0
Reduced speed USB-AX56
#84 opened by roelandg - 3
- 1
"EFI variables are not supported on this system" after "sudo make sign-install"
#79 opened by Vikhamar - 2
OpenWRT integration
#71 opened by andrey-utkin - 1
5GHz AP mode?
#78 opened by mohrezaei - 1
how to add tp link archer tx20u plus
#77 opened by Dialgatrainer02 - 7
Kernel crash
#33 opened by brinn - 1
Adding an ipvlan link with the wireless device as the parent causes wifi to fail
#76 opened by Mossop - 1
- 2
Build error : fallthrough
#59 opened by biopsin - 1
Periodic driver hang
#70 opened by hardening - 1
Driver not working for Asus AX56 on Fedora
#66 opened by jacobdiaz28 - 3
- 1
crash in make
#65 opened by LLMoreira - 0
Suggestion: Correcting the Broken Repository Link in Installation Instructions
#62 opened by typingbugs - 0
Build driver raspberry pi4b
#61 opened by tonia211262 - 2
Make error in raspiberry pi desktop
#58 opened by chrisuhg - 2
- 1
- 1
Kernel trace when plug-off the device.
#55 opened by Sauerlandlinux - 2
USB-AX55-NANO does not enumerate a network device
#54 opened by klugja - 7
- 14
ARM and ARM64 Platforms Support Missing
#50 opened by kamarya - 1
RTL8852AU driver for monitor mode ?
#51 opened by RobertChouKFC - 1
Broke on kernel 6.3.1
#46 opened by amithiel - 2
ASUS USB-AX56 rtl8852au state DOWN on resume
#48 opened by biopsin - 6
cannot connect on non DFS 5G network
#47 opened by georgnistor - 6
Ax56 Unusual work
#45 opened by Zhenyettta - 4
- 1
- 2
led not working
#42 opened by georgnistor - 3
TP-Link Archer TX20UH
#41 opened by TheFlipside - 3
Driver not recognizing device: 0bda:885c Realtek Semiconductor Corp. 802.11ax WLAN Adapter
#40 opened by aleck099 - 1
Fenvi FU-AX1800P netns
#39 opened by Killozor - 1
Readme typo error
#38 opened by hunabku94 - 7
- 3
shift exponent 32 is too large for 32-bit
#34 opened by amithiel - 1
No interface speed information
#31 opened by moontide - 5
getting a few errors on debian 11
#30 opened by wp-coin