dnsstat

libpcap-based tool for analyzing DNS performance

About

dnsstat has been created in desperate need for a tool for debugging DNS issues on a broadband connection at home. Surfing the web felt slow and stuttery but issuing test queries using dig never yielded any lost query, so the author decided to capture all DNS traffic and perform an offline analysis.

dnsstat implements this analysis, enabling its user to avoid manual accounting using Wireshark and the-like.

Limitations

Currently dnsstat only recognizes DNS packets matching the following criteria:

Layer 1-2: Ethernet
Layer 3: IPv4 or IPv6
single DNS query/response per packet

Building

Make sure you have the following requirements installed:

cmake
libpcap (tested with 1.8.1)

The code is supplied as a CMake project so either use your favorite IDE or compile manually:

$ cmake .
$ make

There currently is no installation mechanism, the binary is located in the build directory.

Usage

Run the binary with a pcap file as argument:

$ ./dnsstat /path/to/trace.pcap
Queries
    sent:           309
    answered:       307
    lost:             2 (0.01%)
Delay
    min:           0.11 ms
    avg:          66.89 ms
    max:        1052.54 ms
    stdev:       206.59 ms

Help is available using -h.

A packet trace for analysis can be obtained using tcpdump:

$ tcpdump -i eth0 -w trace.pcap 'udp port 53'

Contributing

This project is provided this as-is, in hope that it might be of any use for someone who needs to debug DNS issues or collect DNS performance metrics.

Pull requests for improvements or bug fixes are greatly appreciated.

License

This work is published under the terms of the MIT License, see file LICENSE.