This is the repo for all the Mostly Printed CNC Primo Versions.
Mostly Printed CNC by V1 Engineering Inc is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Permissions beyond the scope of this license may be available at https://www.v1engineering.com/license/.
Below details copied from https://www.v1engineering.com/license/ :
To clarify my intent with this license. Under CC-BY-NC-SA I can stipulate looser restrictions, and do so.
- You can freely modify all models/files provided you keep the same license, this is Share Alike. You will have the same rights with your models/files as I do with my models/files.
- You can resell parts you have purchased from V1 Engineering Inc, but not parts you’ve printed yourself from my models. If you want to sell parts for a single machine you privately printed with my models can do so freely in the forums. I would prefer all non-licensed sales to happen here, the For Sale section. Selling in other places muddies the boundaries for un-authorized sellers. If you are unclear please just email me.
- You can use any of the machines commercially. You can use it in a video, at events, in a business, including charging for it’s time or making products that you sell. You can use it in a non-profit or commercial setting. You just can’t sell the parts made from my models. You can’t sell something (electronics/hardware kits, assembly course, training) and include my parts “for free”.
It really is that simple. Anyone that wants to use or make any of my machines, can....for free. I do everything I can to make these things easy to source and assemble globally, and use as few unique tools as possible, you are also not locked into any sort of specific hardware or firmware. If you did not want to buy anything from me, you should not have to. I also provide a friendly and welcoming place to get help if needed, and clear assembly instructions (if you find something is not clear you can even help out and suggest a change).
The one stipulation I have is please, do not sell my designs or the parts that those designs make. If you want to make your own please make it significantly difierent so the new users would have no problem recognizing that it is not my part and use the same license.
| QTY | Part Name | Infill | Color |
|---|---|---|---|
| Corner | |||
| 2 | Corner Bottom | 45%+ | B |
| 2 | Corner Bottom Mirrored | 45%+ | B |
| 2 | Corner Top | 45%+ | A |
| 2 | Corner Top Mirrored | 45%+ | A |
| 2 | Lower Belt | 45%+ | A |
| 2 | Lower Belt Mirrored | 45%+ | A |
| 2 | Upper Belt | 45%+ | B |
| 2 | Upper Belt Mirrored | 45%+ | B |
| 4 | Corner Leg Lock | 45%+ | B |
| 4 | Feet | 45%+ | A |
| 2 | Wire Darryl | 45%+ | A |
| 4 | Stop Block (Dual only) | 45%+ | A |
| Trucks | |||
| 2 | Truck | 45%+ | A |
| 2 | Truck Mirrored | 45%+ | A |
| 4 | Truck Clamp | 45%+ | B |
| Z-Axis | |||
| 1 | Z Motor | 45%+ | A |
| 1 | Z Coupler | 45%+ | A |
| 2 | Nut Trap | 45%+ | A |
| 1 | Upper Tool Plate | 45%+ | A |
| 1 | Lower Tool Plate | 45%+ | A |
| Center Assembly | |||
| 2 | Core Z Clamp 1 | 45%+ | A |
| 2 | Core Z Clamp 2 | 45%+ | A |
| 3 | Core Clamp | 45%+ | A |
| 1 | Core ClampY | 45%+ | A |
| 1 | Core | 70% | B |
The V1 Engineering Inc Logo is a registered trademark, please use it accordingly. USPTO Serial Number 88572477