forked-daapd

forked-daapd is a Linux/FreeBSD DAAP (iTunes) and RSP (Roku) media server.

It has support for AirPlay devices/speakers, Apple Remote (and compatibles), internet radio, Spotify and LastFM. It does not support AirPlay video.

DAAP stands for Digital Audio Access Protocol, and is the protocol used by iTunes and friends to share/stream media libraries over the network.

RSP is Roku's own media sharing protocol. Roku are the makers of the SoundBridge devices. See http://www.roku.com.

The source for this version of forked-daapd can be found here:

https://github.com/ejurgensen/forked-daapd.git

The original (now unmaintained) source can be found here:

http://git.debian.org/?p=users/jblache/forked-daapd.git

forked-daapd is a complete rewrite of mt-daapd (Firefly Media Server).

Getting started

After installation (see INSTALL) do the following:

Edit the configuration file (usually /etc/forked-daapd.conf) to suit your needs
Start or restart the server (usually /etc/init.d/forked-daapd restart)
Wait for the library scan to complete. You can follow the progress with tail -f /var/log/forked-daapd.log
If you are going to use a remote app, pair it following the procedure described below

Supported clients

forked-daapd supports 4 kinds of clients:

DAAP clients, like iTunes or Rhythmbox
Remote clients, like Apple Remote or compatibles for Android/Windows Phone
AirPlay devices, like AirPort Express, Shairport and various AirPlay speakers
RSP clients, like Roku Soundbridge

Like iTunes, you can control forked-daapd with Remote and stream your music to AirPlay devices.

A single forked-daapd instance can handle several clients concurrently, regardless of the protocol.

Here is a list of working and non-working DAAP and Remote clients. The list is probably obsolete when you read it :-)

Client	Developer	Type	Platform	Working (vers.)
iTunes	Apple	DAAP	Win, OSX	Yes (11.2)
Rhythmbox	Gnome	DAAP	Linux	Yes
WinAmp DAAPClient	WardFamily	DAAP	WinAmp	Yes
Banshee		DAAP	Linux/Win/OSX	No (2.6.2)
jtunes4		DAAP	Java	No
Firefly Client		(DAAP)	Java	No
Remote	Apple	Remote	iOS	Yes (4.2)
Retune	SquallyDoc	Remote	Android	Yes (3.5.23)
TunesRemote+	Melloware	Remote	Android	Yes (2.5.3)
Remote for iTunes	Hyperfine	Remote	Android	Yes
Remote for Windows Phone	Komodex	Remote	Windows Phone	Yes (2.2.1.0)
TunesRemote SE		Remote	Java	Yes (r108)

Using Remote

If you plan to use Remote with forked-daapd, read the following sections carefully. The pairing process described is similar for other controllers, but some do not require pairing.

Pairing with Remote on iPod/iPhone

forked-daapd can be paired with Apple's Remote application for iPod/iPhone/iPad; this is how the pairing process works:

Start forked-daapd
Start Remote, go to Settings, Add Library
Look in the log file for a message saying:
```
"Discovered remote 'Foobar' (id 71624..."
```
This tells you the name of your device (Foobar in this example).

If you cannot find this message, it means that forked-daapd did not receive a mDNS announcement from your Remote. You have a network issue and mDNS doesn't work properly on your network.
Prepare a text file with a filename ending with .remote; the filename doesn't matter, only the .remote ending does. This file must contain two lines: the first line is the name of your iPod/iPhone/iPad, the second is the 4-digit pairing code displayed by Remote.

If your iPod/iPhone/iPad is named "Foobar" and Remote gives you the pairing code 5387, the file content must be:
```
Foobar
5387 
```
Move this file somewhere in your library

At this point, you should be done with the pairing process and Remote should display the name of your forked-daapd library. You can delete the .remote file once the pairing process is done.

If Remote doesn't display the name of your forked-daapd library at this point, the pairing process failed.

This will usually be because the .remote file did not contain the correct name or pairing code. Start over the pairing process and try again.

If you have trouble pairing with forked-daapd, you can use avahi-browse for troubleshooting:

in a terminal, run avahi-browse -r -k _touch-remote._tcp
start Remote, goto Settings, Add Library
after a couple seconds at most, you should get something similar to this:

+ ath0 IPv4 59eff13ea2f98dbbef6c162f9df71b784a3ef9a3      _touch-remote._tcp   local
= ath0 IPv4 59eff13ea2f98dbbef6c162f9df71b784a3ef9a3      _touch-remote._tcp   local
   hostname = [Foobar.local]
   address = [192.168.1.1]
   port = [49160]
   txt = ["DvTy=iPod touch" "RemN=Remote" "txtvers=1" "RemV=10000" "Pair=FAEA410630AEC05E" "DvNm=Foobar"]

The name of your iPod/iPhone/iPad is the value of the DvNm field above. In this example, the correct value is Foobar.

Watch out for fancy characters; for instance, the name of your device may include Unicode characters that aren't visually different from plain ASCII characters (like the single quote if your device name follows the default scheme of "Foo's iPhone"). If unsure, change the name of your device or capture the output in a file to extract the real, correct name.

Hit Ctrl-C to terminate avahi-browse.

Selecting output devices

Remote gets a list of output devices from the server; this list includes any and all devices on the network we know of that advertise AirPlay: AirPort Express, Apple TV, ... It also includes the local audio output, that is, the sound card on the server (even if there is no soundcard).

By default, if no output is selected when playback starts, the local output device will be used. If that fails it will try to stream to any available AirPlay speaker.

forked-daapd remembers your selection and the individual volume for each output device; selected devices will be automatically re-selected at the next server startup, provided they appear in the 5 minutes following the startup and no playback has occured yet.

AirPlay devices/speakers

forked-daapd will discover the AirPlay devices available on your network. For devices that are password-protected, the device's AirPlay name and password must be given in the configuration file. See the sample configuration file for the syntax.

Local audio output

The audio section of the configuration file supports 2 parameters for the local audio device:

nickname: this is the name that will be used in the speakers list in Remote
card: this is the name/device string (ALSA) or device node (OSS4) to be used as the local audio device. Defaults to "default" for ALSA and "/dev/dsp" for OSS4.

Supported formats

forked-daapd should support pretty much all media formats. It relies on libav (ffmpeg) to extract metadata and decode the files on the fly when the client doesn't support the format.

Formats are attributed a code, so any new format will need to be explicitely added. Currently supported:

MPEG4: mp4a, mp4v
AAC: alac
MP3 (and friends): mpeg
FLAC: flac
OGG VORBIS: ogg
Musepack: mpc
WMA: wma (WMA Pro), wmal (WMA Lossless), wmav (WMA video)
AIFF: aif
WAV: wav

Streaming MPEG4

Depending on the client application, you may need to optimize your MPEG4 files for streaming. Stream-optimized MPEG4 files have their metadata at the beginning of the file, whereas non-optimized files have them at the end.

Not all clients need this; if you're having trouble playing your MPEG4 files, this is the most probable cause. iTunes, in particular, doesn't handle files that aren't optimized, though FrontRow does.

Files produced by iTunes are always optimized by default. Files produced by FAAC and a lot of other encoders are not, though some encoders have an option for that.

The mp4creator tool from the mpeg4ip suite can be used to optimize MPEG4 files, with the -optimize option:

  $ mp4creator -optimize foo.m4a

Don't forget to make a backup copy of your file, just in case.

Note that not all tag/metadata editors know about stream optimization and will happily write the metadata back at the end of the file after you've modified them. Watch out for that.

Playlists and internet radio

forked-daapd supports M3U and PLS playlists. Just drop your playlist somewhere in your library with an .m3u or .pls extension and it will pick it up.

If the playlist contains an http URL it will be added as an internet radio station, and the URL will be probed for Shoutcast (ICY) metadata.

forked-daapd does not support playlists in playlists (so for instance a .m3u where one of the items is another .m3u or .pls).

Support for iTunes Music Library XML format is available as a compile-time option. By default, metadata from our parsers is preferred over what's in the iTunes DB; use itunes_overrides = true if you prefer iTunes' metadata.

Smart playlists are not supported at the moment.

Artwork

forked-daapd has support for artwork.

Embedded artwork is only supported if your version of forked-daapd was built with libav 9+ or ffmpeg 0.11+.

Your artwork must be in PNG or JPEG format, dimensions do not matter; forked-daapd scales down (never up) the artwork on-the-fly to match the constraints given by the client. Note, however, that the bigger the picture, the more time and resources it takes to perform the scaling operation.

The naming convention for album and artist artwork (group artwork) is as follows:

if a file {artwork,cover,Folder}.{png,jpg} is found in one of the directories containing files that are part of the group, it is used as the artwork. The first file found is used, ordering is not guaranteed;
failing that, if [directory name].{png,jpg} is found in one of the directories containing files that are part of the group, it is used as the artwork. The first file found is used, ordering is not guaranteed;
failing that, individual files are examined and the first file found with an embedded artwork is used. Here again, ordering is not guaranteed.

Artwork for individual songs is not supported, artwork for individual songs is found by resolving to the group artwork.

{artwork,cover,Folder} are the default, you can add other base names in the configuration file.

You can use symlinks for the artwork files; the artwork is not scanned/indexed.

forked-daapd caches artwork in a separate cache file. The default path is /var/cache/forked-daapd/cache.db and can be configured in the configuration file. The cache.db file can be deleted without losing the library and pairing informations.

Library

The library is scanned in bulk mode at startup, but the server will be available even while this scan is in progress. You can follow the progress of the scan in the log file.

Of course, if files have gone missing while the server was not running a request for these files will produce an error until the scan has completed and the file is no longer offered. Similarly, new files added while the server was not running won't be offered until they've been scanned.

Changes to the library are reflected in real time after the initial scan. The directories are monitored for changes and rescanned on the fly. Note that if you have your library on a network mount then real time updating may not work. Read below about what to do in that case.

If you change any of the directory settings in the library section of the configuration file a rescan is required before the new setting will take effect. Currently, this will not be done automatically, so you need to trigger the rescan as described below.

Symlinks are supported and dereferenced. This does interact in tricky ways with the above monitoring and rescanning, so you've been warned. Changes to symlinks themselves won't be taken into account, or not the way you'd expect.

If you use symlinks, do not move around the target of the symlink. Avoid linking files, as files themselves aren't monitored for changes individually, so changes won't be noticed unless the file happens to be in a directory that is monitored.

Bottom line: symlinks are for directories only.

Pipes made with mkfifo are also supported. This feature can be useful if you have a program that can stream PCM16 audio to a pipe. Forked-daapd can then forward the audio to one or more AirPlay speakers.

Pipes have no metadata, so they will be added with "Unknown artist" and "Unknown album". The name of the pipe will be used as the track title.

Libraries on network mounts

Most network filesharing protocols do not offer notifications when the library is changed. So that means forked-daapd cannot update its database in real time. Instead you can schedule a cron job to update the database.

The first step in doing this is to add two entries to the 'directories' configuration item in forked-daapd.conf:

  directories = { "/some/local/dir", "/your/network/mount/library" }

Now you can make a cron job that runs this command:

  touch /some/local/dir/trigger.init-rescan

When forked-daapd detects a file with filename ending .init-rescan it will perform a bulk scan similar to the startup scan.

Troubleshooting library issues

If you place a file with the filename ending .full-rescan in your library, you can trigger a full rescan of your library. This will clear all music and playlists from forked-daapd's database and initiate a fresh bulk scan. Pairing and speaker information will be kept. Only use this for troubleshooting, it is not necessary during normal operation.

Command line and web interface

forked-daapd is meant to be used with the clients mentioned above, so it does not have a command line interface nor does it have a web interface. You can, however, to some extent control forked-daapd from the command line by issuing DAAP/DACP commands with a program like curl. Here is an example of how to do that.

Say you have a playlist with a radio station, and you want to make a script that starts playback of that station:

Run 'sqlite3 [your forked-daapd db]'. Use 'select id,title from files' to get the id of the radio station, and use 'select id,title from playlists' to get the id of the playlist.
Convert the two ids to hex.
Put the following lines in the script with the relevant ids inserted (also observe that you must use a session-id < 100, and that you must login and logout):

curl "http://localhost:3689/login?pairing-guid=0x1&request-session-id=50"
curl "http://localhost:3689/ctrl-int/1/playspec?database-spec='dmap.persistentid:0x1'&container-spec='dmap.persistentid:0x[PLAYLIST-ID]'&container-item-spec='dmap.containeritemid:0x[FILE ID]'&session-id=50"
curl "http://localhost:3689/logout?session-id=50"

Spotify

forked-daapd has some support for Spotify. It must be compiled with the --enable-spotify option (see INSTALL). You must have also have libspotify installed, otherwise the Spotify integration will not be available. You can get libspotify here:

Original (binary) tar.gz, see https://developer.spotify.com
Debian package (libspotify-dev), see https://apt.mopidy.com

You must also have a Spotify premium account. If you normally log into Spotify with your Facebook account you must first go to Spotify's web site where you can get the Spotify username and password that matches your account. With forked-daapd you cannot login into Spotify with your Facebook username/password.

The procedure for logging in to Spotify is very much like the Remote pairing procedure. You must prepare a file, which should have the ending ".spotify". The file must have two lines: The first is your Spotify user name, and the second is your password. Move the file to your forked-daapd library. Forked-daapd will then log in and add all the music in your Spotify playlists to its database.

Spotify will automatically notify forked-daapd about playlist updates, so you should not need to restart forked-daapd to syncronize with Spotify.

For safety you should delete the ".spotify" file after first login. Forked-daapd will not store your password, but will still be able to log you in automatically afterwards, because libspotify saves a login token. You can configure the location of your Spotify user data in the configuration file.

Limitations: You will only be able to play tracks from your Spotify playlists, so you can't search and listen to music from the rest of the Spotify catalogue. You will not be able to do any playlist management through forked-daapd - use a Spotify client for that. You also can only listen to your music by letting forked-daapd do the playback - so that means you can't stream from forked-daapd to iTunes.

LastFM

If forked-daapd was built with LastFM scrobbling enabled (see the INSTALL file) you can have it scrobble the music you listen to. To set up scrobbling you must create a text file with the file name ending ".lastfm". The file must have two lines: The first is your LastFM user name, and the second is your password. Move the file to your forked-daapd library. Forked-daapd will then log in and get a permanent session key.

You should delete the .lastfm file immediately after completing the first login. For safety, forked-daapd will not store your LastFM username/password, only the session key. The session key does not expire.

To stop scrobbling from forked-daapd, add an empty ".lastfm" file to your library.

m42i/forked-daapd