QMK Firmwares for SplittedSpace keyboards

This is the repository where you can download pre-built QMK firmware for your keyboard. More details about QMK as well as the instructions for a modification you can read at the official repository

Prerequisites

For flashing the firmware we recommend using QMK Toolbox

How to flash firmware

Note: each half should be flashed separately so all steps 1-7 need to be done twice (8 as you wish).

Go to a folder for your keyboard
Choose the appropriate .hex file; all files are prefixed with the exact keyboard model, also the readme describes the firmware details
Download the file to your computer
Open QMK Toolbox and choose in "Local file" the previously downloaded firmware
Connect your keyboard to USB
Find the Reset button on your keyboard and press it. May need one or two pressing
Press the "Flash" button and wait until the firmware be flashed
Enjoy)

Modification

For building your own firmware you can use one of the following firmware repositories:

QMK
VIAL

Using VIAL allows getting the more powerful way of configuration but needs much more internal memory so not all features can be present at a time.

Since there may be some changes in keyboard layouts and also to simplify firmware modifications we provide QMK configuration files we are using for firmware. They are located inside the appropriate keyboard folders. You can use them in your own firmware development.

Arduino

Arduino installed on the boards has Atmega32u4 controller with Caterina bootloader

Leds