macdylan/sm2uploader

Issues

• 强化擦料塔功能似乎有一些问题 Some questions about reinforce the prime tower

  #23 opened a month ago
  8

• Error: G-Code fix error(ignored): Invalid G-Code file

  #22 opened 6 days ago
  3

• Error: "the copy or mirror mode is disabled for dual-extrusion models"

  #21 opened 4 months ago
  1

• AutoDiscovery - Broadcast address wrong

  #20 opened 4 months ago
  0

• Wrong temperatures are set for IDEX J1

  #19 opened 5 months ago
  3

• Save uploaded gcode when simulated OctoPrint server used

  #18 opened 6 months ago
  1

• Error message while uploading - but print is doing well

  #17 opened 7 months ago
  2

• preview image

  #16 opened 7 months ago
  0

• When printing with only the right nozzle, the nozzle temperature from the second layer is set to 0

  #15 opened 5 months ago
  3

• Upload and start print automatically

  #14 opened 8 months ago
  6

• Auto discovery not working

  #13 opened 9 months ago
  3

• Broadcast address calculation was broken in 2c99a44

  #11 opened a year ago
  2

• 这个问题要怎么解决？

  #10 opened a year ago
  2

• Pressing YES is still required

  #9 opened a year ago
  8

• Discovery doesn't work if subnet is not /24

  #8 opened 6 months ago
  5

• V1.8 is much slower than predecessor(s)

  #7 opened 5 months ago
  13

• i/o timeout

  #6 opened a year ago
  1

• got command set/id 172/165 but expected 1/5

  #5 opened a year ago
  2

• Octoprint settings?

  #4 opened a year ago
  4

• Instructions are terrible.

  #3 opened a year ago
  2

• pls make working for J1

  #2 opened a year ago
  2

• Is this compatible with J1 as well?

  #1 opened a year ago
  2