ODR-DabMod is a DAB (Digital Audio Broadcasting) modulator compliant to ETSI EN 300 401. It is the continuation of the work started by the Communications Research Center Canada, and is now pursued in the Opendigitalradio project.
ODR-DabMod is part of the ODR-mmbTools tool-set. More information about the ODR-mmbTools is available in the guide, available on the Opendigitalradio mmbTools page.
- Reads ETI and EDI, outputs compliant COFDM I/Q
- Supports native DAB sample rate and can also resample to other rates
- Supports all four DAB transmission modes
- Configuration file support, see
doc/example.ini - First-class support for USRP devices using UHD driver
- Tested for B200, B100, USRP2, USRP1
- With WBX daughterboard (where appropriate)
- Timestamping support required for SFN
- GPSDO monitoring (both Ettus and ODR LEA-M8F board)
- Second-class support for devices using SoapySDR
- Known to work with LimeSDR board, the HackRF.
- Second-class support for LimeSDR through LimeSuite
- Second-class support for BladeRF 2.0 devices
- Monitoring integration with munin
- A FIR filter for improved spectrum mask
- TII insertion
- Logging: log to file, to syslog
- EDI sources: TCP and UDP, both with and without Protection and Fragmentation Layer.
- ETI sources: ETI-over-TCP, file (Raw, Framed and Streamed) and ZeroMQ
- A Telnet and ZeroMQ remote-control that can be used to change
some parameters during runtime and retrieve statistics.
See
doc/README-RC.mdfor more information - ZeroMQ PUB and REP output, useful for sending IQ to GNURadio flowgraphs.
- Development has stalled on the following topics:
- Experimental prototype about digital predistortion for PA linearisation.
- See
python/dpd/README.md
- See
- A web GUI for control and supervision of modulator and predistortion engine. See
python/gui/README.md
- Experimental prototype about digital predistortion for PA linearisation.
The src/ directory contains the source code of ODR-DabMod.
The doc/ directory contains the ODR-DabMod documentation, an example
configuration file and a script for munin integration.
The lib/ directory contains source code of libraries needed to build
ODR-DabMod.
The python/ directory contains a web-based graphical control interface and
the digital predistortion project.
See the INSTALL.md file for installation instructions.
See the files LICENCE and COPYING
Matthias P. Braendli matthias [at] mpb [dot] li
Pascal Charest pascal [dot] charest [at] crc [dot] ca
With thanks to other contributors listed in AUTHORS