machinekit/Cetus

Issues

• Touch off Lathe mode

  #19 opened 6 years ago by alkabal
  7

• DRO tab not work with lathe

  #10 opened 7 years ago by alkabal
  6

• Joint following error on larger file

  #21 opened 6 years ago by pauloasherring
  5

• user tab extension and other stuff like manualtoolchange

  #23 opened 6 years ago by alkabal
  0

• Ask improvement for direct tool change button and RPM show box for spindle

  #11 opened 6 years ago by alkabal
  0

• Machinekit Client Hangs

  #22 opened 6 years ago by scottnortman
  0

• rtapi

  #12 opened 7 years ago by alkabal
  12

• M6Tx and tool.tbl not check if tool exist in the table

  #18 opened 6 years ago by alkabal
  3

• Enhancement idea

  #20 opened 6 years ago by alkabal
  1

• Adding lathe support

  #8 opened 7 years ago by alkabal
  7

• Some shortcuts does not work

  #2 opened 7 years ago by EdgarJRobles
  6

• gcode program preview doesn't move after touch off

  #7 opened 7 years ago by spaivaras
  1

• Fix DRO for more than 3 digits

  #5 opened 7 years ago by awigen
  1