/PWR

+5 Volt power supply for breadboards using a DC wall adapter or battery.

OtherNOASSERTION

PWR

Issues Status License
Contact Sponsor

About

+5 volt power supply for breadboards using a 12 volt DC wall adapter or a 9 volt battery.

Software

Schemas and PCB layouts are created with KiCad:
http://www.kicad-pcb.org

Footprints Library

This project requires the XS-Labs KiCad Library to be installed in KiCad.

Board

Here's what the board looks like:

3D Top Bottom

Bill Of Materials

Manufacturer Part No. Details Quantity
CUI Devices PJ-102AH DC Power Jack 1
Keystone Electronics 1291 9V Battery Snap Holder 1
ON Semiconductor 1N4001G Rectifier 50V 1A Standard 2
Texas Instruments LM7805CT/NOPB Linear Voltage Regulator 5V 1
Vishay MAL214250101E3 Aluminium Electrolytic Capacitor - Radial Leaded 100uF 35V 20% 1
Vishay MAL214258109E3 Aluminium Electrolytic Capacitor - Radial Leaded 10uF 63V 20% 1
Murata RCER71H334K1K1H03B Multilayer Ceramic Capacitor - Radial Leaded 0.33uF 50V 10% 1
Murata RCER71H104K0K1H03B Multilayer Ceramic Capacitor - Radial Leaded 0.1uF 50V 10% 1
VCC 4302H1-12V Standard LEDs - Red - 12V 1
VCC 4302H3-12V Standard LEDs - Amber - 12V 1
VCC 4302H5-12V Standard LEDs - Green - 12V 1
Vishay CCF071K00JKE36 Metal Film Resistor - Through Hole 1/4watt 1Kohms 5% 1
Vishay CCF07390RJKE36 Metal Film Resistor - Through Hole 1/4watt 390ohms 5% 2
NKK Switches M2012SA1W03 Toggle Switch ON-ON PC SPDT 1
Wurth Elektronik 691214110002 Fixed Terminal Block WR-TBL 300VAC 10A 2P Horizontal 1

License

All project files are released under the terms of the CERN Open Hardware License - CERN OHL v.1.2.

Repository Infos

Owner:          Jean-David Gadina - XS-Labs
Web:            www.xs-labs.com
Blog:           www.noxeos.com
Twitter:        @macmade
GitHub:         github.com/macmade
LinkedIn:       ch.linkedin.com/in/macmade/
StackOverflow:  stackoverflow.com/users/182676/macmade