madMAx43v3r/mmx-binaries

Issues

• plots check

  #37 opened a year ago by zhurakovsky01
  0

• closing the program causes a critical system error (ucrtbase.dll) in the system stability log

  #36 opened 2 years ago by GMND
  2

• Number of expected challenges a farm should receive

  #35 opened 2 years ago by Jacek-ghub
  3

• On Windows running MMX node makes system unresponsive for some milliseconds of time.

  #24 opened 2 years ago by chilio
  7

• Gigahorse-1.1.8-9d66b86: GPU address limit 1TB/40bit problem: instance of 'std::runtime_error, signal 6, swiotlb buffer is full, NVRM: Failed to create a DMA mapping!

  #28 opened 2 years ago by bladeuserpi
  6

• cuda_plot keeps GPU x open when only GPU y is selected

  #29 opened 2 years ago by mwpastore
  8

• [Fixed] mmx-cuda-plotter doesn't back off when new plot is finished, but rather starts a second plot xfr per HD

  #31 opened 2 years ago by Jacek-ghub
  15

• Node becomes 'Disconnected from Node'

  #12 opened 2 years ago by chilio
  21

• chia-plot-sink doesn't work with mmx-cpu-plotter

  #34 opened 2 years ago by aramod
  14

• [-t was and is equivalent to -stage, so no need for this implementation] Add "stage" destination to cuda-plotter

  #32 opened 2 years ago by Jacek-ghub
  4

• Expected lookup times with compressed plots

  #33 opened 2 years ago by Jacek-ghub
  3

• [Fixed] plot-sink possibly stuck on selecting the next drive, if the drive to be first selected doesn't have expected folder structure

  #25 opened 2 years ago by Jacek-ghub
  3

• cuda_plot Feature Request: a -2 for every -g

  #30 opened 2 years ago by mwpastore
  5

• Gigahorse 1.1.8-ff505a5 does not run on M4000 with Cuda5.2: after phase1, terminate called, what(): invalid device ordinal , signal 6

  #14 opened 2 years ago by bladeuserpi
  16

• -d tag in plotter

  #27 opened 2 years ago by Lc001tr
  1

• Out of memory

  #26 opened 2 years ago by okumedia
  0

• Potential enhancements to cuda-plot and plot-sink combo

  #22 opened 2 years ago by Jacek-ghub
  5

• [Solved] plot-sink reading target drives from a file - enabling "hot swap"

  #18 opened 2 years ago by Jacek-ghub
  20

• Plots created with compression are not recognized in mmx-node

  #7 opened 2 years ago by chilio
  1

• NativeCommandError while plotting with cuda_plot_k32 on Windows.

  #10 opened 2 years ago by chilio
  1

• Directory Structure for Windows

  #20 opened 2 years ago by okumedia
  1

• 0.9.8 Do not recognize compressed image！！！

  #17 opened 2 years ago by asdasdasdzxcgreter
  11

• chia-plot-sink add/remove drive while copying?

  #6 opened 2 years ago by chilio
  7

• Gigahorse 1.1.8-217b8ba sporadic park_delta(): LP_1 < LP_0 (2183940545018, 2199560346605), park_delta_split(): small_delta > 255 , ans_encode_sym(): index out of bounds: 32694, double free or corruption (!prev), signal 6

  #16 opened 2 years ago by bladeuserpi
  5

• Gigahorse 1.1.8-40a8b16 3060Ti: sporadic WritePark(): ans_length (857) > max_ans_length (856) (y = 0, i = 465)

  #13 opened 2 years ago by bladeuserpi
  1

• chia-plot-sink，Suggestions for improvement.

  #5 opened 2 years ago by asdasdasdzxcgreter
  1

• file not recognized by chia software k32 file failed to open file

  #4 opened 2 years ago by neo57500
  2

• Windows version always exits after [P2] Setup took ... sec

  #1 opened 2 years ago by chilio
  3

• Support for CUDA Compute Capability 8.0

  #2 opened 2 years ago by hibagus
  2