Pinned Repositories
27c160-tl866-adapter
Adapter to program EPROMs with more than 40 Pins on the TL866 universal programmer.
3D-Printer-Filament-Runout-Sensor
This is a low filament detector base on the ATtiny13 - 8-bit AVR Microcontroller for your 3d printer. When your filament runs out it will sound the alarm and flash the RGB LED and with the proper firmware modifications and GCode, will pause your printer giving you time reload your filament.
3D-Printer-Filament-Width-Sensor
This is an optical sensor based on the ATtiny85 that measures the plastic filament width in real time as it goes into a 3D printer extruder by using the TSL1401CL sensor.
3D-Printing-ESP8266
This LUA code and Adapter for ESP8266 provides wireless networking for RepRap 3D printers.
Arduino-Shield-AVR-Programmer
An AVR programmer Arduino shield compatible with Arduino UNO or Arduino Mega
freerouting
Yet another copy of the original freerouting.net source
mafe-kicad-libraries
This is a single source of all the KiCAD libraries I created for my personal use.
NESPi-Fan-Control-Board
This is a temperature control board for the RetroFlag NESPi-4 Case, SNESPi Case U, SNESPi Case J, MEGAPi Case, NESPi Case/NESPi Case +, and the YIKESHU Black NES Case, this PCB adds the ability to cool down the system during gameplay. Fully compatible with Raspbian, RetroPie, RecalBox, and Batocera.
piZero-USB-Hub
A small 4 port USB hub for the Raspberry Pi Zero
Retroflag-NESPi-Front-Panel-Control-Board
This is an enhancement board for the RetroFlag NESPi case front panel, this PCB add missing functionality to the system.
mafe72's Repositories
mafe72/27c160-tl866-adapter
Adapter to program EPROMs with more than 40 Pins on the TL866 universal programmer.
mafe72/Retroflag-NESPi-Front-Panel-Control-Board
This is an enhancement board for the RetroFlag NESPi case front panel, this PCB add missing functionality to the system.
mafe72/NESPi-Fan-Control-Board
This is a temperature control board for the RetroFlag NESPi-4 Case, SNESPi Case U, SNESPi Case J, MEGAPi Case, NESPi Case/NESPi Case +, and the YIKESHU Black NES Case, this PCB adds the ability to cool down the system during gameplay. Fully compatible with Raspbian, RetroPie, RecalBox, and Batocera.
mafe72/piZero-USB-Hub
A small 4 port USB hub for the Raspberry Pi Zero
mafe72/3D-Printer-Filament-Width-Sensor
This is an optical sensor based on the ATtiny85 that measures the plastic filament width in real time as it goes into a 3D printer extruder by using the TSL1401CL sensor.
mafe72/Arduino-Shield-AVR-Programmer
An AVR programmer Arduino shield compatible with Arduino UNO or Arduino Mega
mafe72/3D-Printer-Filament-Runout-Sensor
This is a low filament detector base on the ATtiny13 - 8-bit AVR Microcontroller for your 3d printer. When your filament runs out it will sound the alarm and flash the RGB LED and with the proper firmware modifications and GCode, will pause your printer giving you time reload your filament.
mafe72/mafe-kicad-libraries
This is a single source of all the KiCAD libraries I created for my personal use.
mafe72/3D-Printing-ESP8266
This LUA code and Adapter for ESP8266 provides wireless networking for RepRap 3D printers.
mafe72/freerouting
Yet another copy of the original freerouting.net source
mafe72/picontrol
Pi Control
mafe72/TrueChartsHelm
TrueNAS SCALE Archive Catalog
mafe72/Arduino-Motorized-Camera-Slider
This is an upgrade for a manual camera slider to a motorized slider using an arduino and 3D printed parts.
mafe72/ATTinyUINO
PCB files for ATTinyUINO 5V - a DIY Arduino Gemma based on the ATtiny85.
mafe72/kicad_smisioto
Kicad Library from http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm
mafe72/Manual-Pick-and-Place-Automatic-Tape-Feeder
This code controll the ON and OFF of the Automatic Tape Feeder (ATF) on a manual Pick and Place Machine.
mafe72/mini-nes
Support code for my version of a RPi-based Mini NES
mafe72/NESPi-piControl
Addon to the NESPi case
mafe72/PiDash-Control
This is a system info display with PWM fan control and a one-button interface for soft-shutdown and reboot of the Raspberry Pi.
mafe72/raspberry-pi-compute-module-base-board
Base board for the Raspberry Pi Compute Module
mafe72/SMT_Vibration_Feeder
This is a SMT Vibrating Feeder compatible with the CHMT36xx Desktop Pick and Place machine
mafe72/TrueChartsArchive
This repo contains old TrueCharts project code
mafe72/USB-Port-Tester
A simple USB polarity and data activity tester